its probably one of the songs from ghost in the shell, im certain i heard it from something related to that, singer is Origa, thats all i know, u can YT it or something.
the power supply sits right above the cput locaton so your limited to low profile heatsinks, so either the typical stock heatsink or like the thermaltake orb heatsinks will fit but tall heatsinks will not.
1. The hard drive has clips that slide into the bottom frame of the chassis, some at the front and at the back, I flattened the ones at the back and used the front ones to secure it to the back location and then used a metal tap screw to lock it down.
2. Yes a 4870 will fit, if you follow the same way I did for repositioning the HDD cage.
3. Song name: Player, By: Origa with Heartdales, Album: Ghost in the Shell Stand Alone Complex Solid State Society OST.
Its the Scythe KAMA-METER SCKM-1000 5.25inch Bay Fan Controller w/ LCD Display, however this fan controller is not produced anymore so finding a retailer that still has it in stock is somewhat difficult to do.
well sure if you do it the wrong way, if its done right, a leak would be the last thing on your mind. This is why I use say 7/16" tubing on 1/2" barbs, you have to boil the tube so it expands to fit over the barb and when it cools, it shrinks onto the barb making it a tight seal and well there is no way thats coming off. ^__^
oh as it states, that is the XBOX 360 HD-DVD Add-On Drive, you would buy that and plug it into your 360 so that you could watch HD-DVD movies, but in my case I hooked it up to my PC and used it as an HD-DVD Drive for the rig. :)
are you talking about the X-Box 360 HD-DVD Drive? if so thats what it is and then I painted it to go with the case but its been replaced a while back with a Blu-Ray/HD-DVD Drive.
Is your PSU a modular? I am going to order the same case and run the 4870 on a Biostar mobo but, I don't want a bunch of cables taking up room and retaining heat.
yes I believe the orb series of coolers from thermaltake should work with this case as its what they use to show it off with, however this will also depend on the motherboard and what type of chipset cooler is being used on the board.
hey i like what u did so if i installed the swiftech h20-120 and removed the one internal hardive could i fit a 9800 gtx? cause it says its 8800 certified if u removed hdd cage and 9800 gtx isnt bigger i just need to now if the h20-120 and gtx could fit? thnx :)
wow i wish i was a god like you... i have the same case but i have the big handle... anyway im looking for a good mobo and i serched yours but mine is just as good... so wondering if you could reply with another good motherboard thx
Very nice work, I have been longing to get into liquid cooling for some time now :)
But you are going to turn it into a HTPC? not very cost effective plus the 2900 does not have hardware accelerated HD playback and its fan is loud for an HTPC (I have a 2900xt myself). I just did an HTPC build with an Antec Fusion 430, 780G mobo, X2 4400+ etc...780G's are great mobo's to build an HTPC around
Well I have an aftermarket cooler on the 2900xt that runs is 20c cooler and is silent. I have been using it for Blu-ray and hd-dvd playback for sometime now so why spend more on hardware when you can just re-use what you have if it works and how is it not cost effective when Im not spending money? To mean that sounds more cost effective then spending money on all new hardware.
ya it was fun, a pain at times but it was fun and I do enjoy a challenge, right now I am shoving TWO liquid cooling systems in the smalled Full size ATX case out on the market right now and so far its going great, when its done there will be another better walk through video for it.
cool case and build but this music makes me want to destroy my balls with sandpaper.
brandonsexywhitaker 1 year ago
oh yea and nice pc XD
Scorpion7substance 2 years ago
dude that ghost in the shell song is the sh*t!
Scorpion7substance 2 years ago
im looking at getting this case.. looks like a great build.. well done.. whats the music you used on this? thx
starchild9000 2 years ago
its probably one of the songs from ghost in the shell, im certain i heard it from something related to that, singer is Origa, thats all i know, u can YT it or something.
bling6 2 years ago
That looks great!
di41591 2 years ago
im clueless
millwill1 2 years ago
i dont understand any of this but i wish i could
halveAss 2 years ago
the power supply sits right above the cput locaton so your limited to low profile heatsinks, so either the typical stock heatsink or like the thermaltake orb heatsinks will fit but tall heatsinks will not.
PCFlipTV 3 years ago
ok thanks,
i still have one last question:
what is the max height for the cpu cooler??
spensie 3 years ago
like how tall is the waterblock Im using or what is the tallest heatsink can be installed in that case?
PCFlipTV 3 years ago
like what is the tallest heatsink can be installed
spensie 3 years ago
hey man awesome rig.
but i do have a copple of questions:
1 how did you secure the hdd-cage?
2 do you think that a 4870 would fit in if i should replace the hdd-cage?
3 whats the name of the music?
ps Sorry for my poor englisch
spensie 3 years ago
no worries :)
1. The hard drive has clips that slide into the bottom frame of the chassis, some at the front and at the back, I flattened the ones at the back and used the front ones to secure it to the back location and then used a metal tap screw to lock it down.
2. Yes a 4870 will fit, if you follow the same way I did for repositioning the HDD cage.
3. Song name: Player, By: Origa with Heartdales, Album: Ghost in the Shell Stand Alone Complex Solid State Society OST.
PCFlipTV 3 years ago
LOL! the seXbox 360 HD-DVD Drive looks like a book...
Kaarel25 3 years ago
That is an awesome casemod you made. Can you tell me what fancontroller you used in it?
Esparoba2 3 years ago
Its the Scythe KAMA-METER SCKM-1000 5.25inch Bay Fan Controller w/ LCD Display, however this fan controller is not produced anymore so finding a retailer that still has it in stock is somewhat difficult to do.
PCFlipTV 3 years ago
Ok thanks.
Esparoba2 3 years ago
oh men that painting job you have done looks great really amazing
14gameman14 3 years ago
i kinda new to water cooling. if i took the pc to someones house wobbleling the pc around will the water somehow get out ?
ming1993 3 years ago
well sure if you do it the wrong way, if its done right, a leak would be the last thing on your mind. This is why I use say 7/16" tubing on 1/2" barbs, you have to boil the tube so it expands to fit over the barb and when it cools, it shrinks onto the barb making it a tight seal and well there is no way thats coming off. ^__^
ArashinoKaze 3 years ago
at 1:15 look at that weird thing wtf is that
asusm2ne 3 years ago
oh as it states, that is the XBOX 360 HD-DVD Add-On Drive, you would buy that and plug it into your 360 so that you could watch HD-DVD movies, but in my case I hooked it up to my PC and used it as an HD-DVD Drive for the rig. :)
ArashinoKaze 3 years ago
what xbox was that it looked smaller
asusm2ne 3 years ago
are you talking about the X-Box 360 HD-DVD Drive? if so thats what it is and then I painted it to go with the case but its been replaced a while back with a Blu-Ray/HD-DVD Drive.
ArashinoKaze 3 years ago
no the whole thing looked smaller
asusm2ne 3 years ago
could you give me the video time sequence so I can pause it at what your talking about so I can answer your question correctly ^_^
ArashinoKaze 3 years ago
Choice! Nice use of the Lanbox Lite.
themiln 3 years ago
Is your PSU a modular? I am going to order the same case and run the 4870 on a Biostar mobo but, I don't want a bunch of cables taking up room and retaining heat.
bimmermann18 3 years ago
yes I highly recommend a modular PSU to go with this case.
ArashinoKaze 3 years ago
ok im getting a gigabyte mobo which is mirco :)and i have a 8800GT with a 100Speed probplem lol will get a cooler for it.
Aceadam 3 years ago
Hey would a ThermalTake Orb 2 fit in them? =/ lol
Aceadam 3 years ago
yes I believe the orb series of coolers from thermaltake should work with this case as its what they use to show it off with, however this will also depend on the motherboard and what type of chipset cooler is being used on the board.
ArashinoKaze 3 years ago
hey i like what u did so if i installed the swiftech h20-120 and removed the one internal hardive could i fit a 9800 gtx? cause it says its 8800 certified if u removed hdd cage and 9800 gtx isnt bigger i just need to now if the h20-120 and gtx could fit? thnx :)
airsofter18889 3 years ago
ya if ur doing how I did it then you shouldnt have any issues but if you do swing by my forums and we can work out another way.
ArashinoKaze 3 years ago
wow i wish i was a god like you... i have the same case but i have the big handle... anyway im looking for a good mobo and i serched yours but mine is just as good... so wondering if you could reply with another good motherboard thx
p.s ur case is way cooler lol
toatq 3 years ago
I would recommend the ASUS P5E-VM HDMI, its what I plan to upgrade this motherboard too.
If your going AMD then I would say any of the 780G motherboards is nice too.
ArashinoKaze 3 years ago
such a nice looking machine!
only thing is - how portable is it?
34lb/15kg in a bag.. hmm might be an idea for my next pc since I travel a lot
AzzaAgai 3 years ago
hey how can you play blu ray? i didnt see a blu ray drive being installed? or does the 360 drive play blu ray too somehow??
t0nyc0lin 3 years ago
Currently there is a LG Blu-Ray / HD-DVD Sata Drive installed in that rig. :)
ArashinoKaze 3 years ago
Very nice work, I have been longing to get into liquid cooling for some time now :)
But you are going to turn it into a HTPC? not very cost effective plus the 2900 does not have hardware accelerated HD playback and its fan is loud for an HTPC (I have a 2900xt myself). I just did an HTPC build with an Antec Fusion 430, 780G mobo, X2 4400+ etc...780G's are great mobo's to build an HTPC around
bobbytomorow 3 years ago
Well I have an aftermarket cooler on the 2900xt that runs is 20c cooler and is silent. I have been using it for Blu-ray and hd-dvd playback for sometime now so why spend more on hardware when you can just re-use what you have if it works and how is it not cost effective when Im not spending money? To mean that sounds more cost effective then spending money on all new hardware.
ArashinoKaze 3 years ago
nice work awsome , it looks like a shuttle xD
jejeje but buy an nvidia card :P
sk827015 3 years ago
CRAZY PC VERY NICE and i love f.e.a.r. scary game btw
FIcaraudioBTL 3 years ago
Wow dude, really nice job on modding that case!
jackmix69 3 years ago
Wow, looks like an awesome machine... What did all that run you?
HawkFlicks 3 years ago
well about half of it was sponsored but I would say total value when it was brand new would have been around $2000.00us.
ArashinoKaze 3 years ago
omg man i love it kinda squisy oh well still nice omg!!!!!
toatq 3 years ago
Sweet man, what is the temperatue displayed called, like brand name and stuff?
xXxCrimzinxXx 3 years ago
its the Karma-Meter but it does have issues if you plug in more then one fan per channel and could burn out.
ArashinoKaze 3 years ago
fuckin awesome!!!!!!!!!!! did u build it 4 lan parties?
alwa7sh94 3 years ago
originally yes, it was perfect for going to different lan events and now it will be transformed into a kickass HTPC.
ArashinoKaze 3 years ago
WOW KICKASS !!! u should got the 3870x2 instead xD
lolol801 3 years ago
Well I could and I could get it to fit but since Im starting a new rig for gaming Im not going to be doing to much updates to this one ;)
ArashinoKaze 3 years ago
whats the song name.. i hear russian and it makes sense but don't know the song. What is it??
ukraine1990 3 years ago
The artist is Origa with Heartsdales, the name of the song is Player and its from the Ghost In The Shell Solid State Society Sound Track. :)
ArashinoKaze 3 years ago
thanks
ukraine1990 3 years ago
no worries, glad I could answer your question.
ArashinoKaze 3 years ago
thats amazing...
nvtech11 3 years ago
thanks
ArashinoKaze 3 years ago
Nuts, great jop man, very nice.
Decenium 3 years ago
ya it was fun, a pain at times but it was fun and I do enjoy a challenge, right now I am shoving TWO liquid cooling systems in the smalled Full size ATX case out on the market right now and so far its going great, when its done there will be another better walk through video for it.
ArashinoKaze 3 years ago
Looking forward to it :).
To think that im even sacred to just cut out a hole for a sidepanel .... :P.
Decenium 3 years ago