Added: 1 year ago
From: RCcliff
Views: 10,429
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (20)

Sign In or Sign Up now to post a comment!
  • I have a similar set up and I'm running into cg issues. Extremely tail heavy, did you have to add a lot of weight to the nose?

  • @dmcclurg33 I used the stock wood block motor mount. with the 50cc RF BL, I've flown with 12cell made of 2x6c 5000mah series, and 12cell with 2 paralleled sets of 2x6cell series. I have not had any balance issues. The "lifting horizontal Stabilizer" should keep everything really level. The CG range on this plane is huge.

  • The RF50 is not suitable for 12s - It pulls WAY to many amps. 10s is just perfect

  • @OzParkPilot I've been flying the RF50 for over a year on 12S on my 12' telemaster and my 50cc rimfire, this is what it called for. I will say that the choice of ESC in the manual was wrong. It said 120a , yes it pulls almost 160A at WOT. Have not had problems.

  • CAn i use a 50cc GAS engine on it?

  • @tensoares I've heard of someone modifying it for a 50cc gas but they had to add like 7lb of dead weight to the nose. There was a forum on this topic but I don't remember what web site.

  • Any idea of the RPM's with the 24x12 prop?

  • @wrenwright I don't think I ever tached it

  • what brand battery are you using? are you doing 12s2p

    what are you flight times like?

  • ok thanks. I'm waiting your post

  • Thank you so much. I'm waiting your post on 22x8 prop

  • @roberto50800 I don't know if you ever got my response on the 22x8 prop. I've pulled over 150a with the 12cell and 22x8

  • Hi. How much consumption in your setup? Cause I would like to use it with 12 lipo 5000mah 30C prop 22x8 and castle creation 85A HV. Thanks

  • @roberto50800, I have only tried a 24x10 prop on 12c lipo, it pulled 98A full throttle in flight., I'm going to try a 22x8 on 12c lipeo(this is the recommended prop). I will post data when I fly it on 22x8 prop.

  • @roberto50800 I've flown the Telemaster now for a while, I'm using a CC160A HV controller. With the 22x8 zinger Pro wood prop I am getting a in flight amps in excess of 145A burst, I also have the same motor/esc/battery combo on a GP Reactor and have the same readings. See my video of it, Just flew it for the first time this morning.

    The Rimfire 50cc manual says a 120A ESC but I'm getting higher numbers.

    I burnt up a 100A ESC.

    I hope this helps.

    Cliff

  • Hi. How much consumption with 12 lipo? I would like to use it with 12 lipo 5000mah 30C and 22x8 prop, but I have a castle creation 85A HV. Thanks

  • Hi. How much consumption with 12 lipo? I would like to use it with 22x8 prop 12 lipo 5000mah 30C. I have the castle creation 85A. Thanks

  • Congrats! Very nice build

  • haha awesome! nice cross wind landing!

  • Yeah, the whole flight was me trying to get the approach right.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more