Gee Bee R3 2nd Flight Dead Stick Crash Landing

[DAMIENloh1970]

Chinese guy commented:"This plane is hard to fly..." lol

[nicholas5674]

ali, its not a foamy, dont laugh when you crash it man.

[war3hog1337]

Almost no rudder.

[Dtipton6662]

Ali you make every crash look very skillful, but you also come right back......keep flying

[mmalkove]

MAN, you almost made it to the runway, 5 more feet and it would have been a perfect dead stick landing, oh well. damage wasn't bad at all but I know when you pour your heart and soul into a project it SUX to crash it. I haven't been flying planes a lot due to my QUADCOPTER addiction but I still try to keep up.

Talk to you later Alishan.

[alishanmao]

@meatloaf396 its all good mate. guess what i was trying to tell you was that you can not win an argument from Bruce. He is a very very very experienced guy in this field and I take his advise seriously due to his experience.

[jbx907]

isn't is stalling because of the carbs are inverted with the engine?

[alishanmao]

@jbx907 nops, its due to my poor Gasoline engine tuning skills

[jbx907]

lol hehehe!

[Spawn4ever]

lol, you can actually here Myriam get all annoyed with the crash at around 4:27 ... Her sigh says it all.

Doesn't look too bad though. better then breaking a wing i guess.

[alishanmao]

@Spawn4ever guess she likes this heli too

[twinturbostang]

@Spawn4ever

lol I heard that too. She must have been thinking... "So how much is THIS going to cost now??" :-)

Ali, what caused the motor cutout? Bad tuning? Or fuel starvation due to high G maneuvers?

[alishanmao]

@twinturbostang maybe bad tuning mate. I need to learn more about Gas engine tuning, I suck.

[mauryr]

@alishanmao It sounded like a rich high needle. I had an engine sounding exactly like that, closing the high end by about a quarter turn fixed it. It gives loads more power, sounds better and is way more reliable.

[alishanmao]

@mauryr thanks for pointer mate. as soon as i have time to repair this bird landing gear I am gonna fly it again.

[makanudo08]

from what I saw this model has a high percentage of aerodynamically details he has good penetration, but in the question piece center of gravity for the reason this model has a long tail and short front, the manufacturer could alter the incidence of the wing by 0.5 degrees by changing the angle of the wing that would be slightly offset the negative regulation of CG, the phenomenon you could pass this idea to the manufacturer to see if it is possible to make this change to the model embraces

[alishanmao]

@meatloaf396 Ah mate, do not argue with Bruce (Sir xjet). one person that I trust the advise most in this industry is Bruce (xJet) well yes people can be wrong but Bruce has got a proven experience. and he is a great buddy of mine. You are too a great mate. Now as per my experience lol yes all Engines are made in China. DA seems to be heavily advertised but yes DLE are really very popular even inside China.

[giannivee1]

Instead of replying in Chinese you gave him a hand example, so the audience knew what you meant. You are superb. The aircraft is more difficult...LOL, thanks Gianni

[xVoltage21]

you don't give a dam about your stuff because you just get a new one.....

[alishanmao]

@xVoltage21 you sound like jealous or Envious? I do not want to be rude, but not everything I get from sponsored. This plane I bought from my own pocket and I spent quite a good amount of money and time on this bird to prepare it. I do feel bad even when I crash the sponsored stuff cuz its my job to test these not crash these. I do care if something will crash or not even if its sponsored stuff or mine cuz I spend hours and days preparing these things and I love to see them fly, not crash.

[xVoltage21]

@alishanmao ok.

[punchritch]

Dam it man!!! Looked good for a while!!!

[alishanmao]

@punchritch well no worries my man, minor damages are always repairable

[rcheliking]

hah when the engine is giving signs of stalling it sounds like the engine is changing gear :-)

[alishanmao]

@rcheliking LOL right :D

[3dkat1]

Great stuff that is one tough plane :)

[alishanmao]

@3dkat1 it sure is. gotta fix the landing gear

[soverato3]

next step? jet turbine powered plane?? LOL

[alishanmao]

@soverato3 Ah I wish i had that much money :D actually I do have the money but how to get wife convinced to spend 7000 USD on a plane heheheh and then nah, too much trouble. need 3 people to carry it to field, help me start the turbine etc. and then too much equipment to start the engines. nah, we love these simple gassers

[soverato3]

@alishanmao yes.. i angree did you knew there are small sizes turbine planes as small as 50cm

they are light, cheaper and you can fly it on you own!=D

[xjet]

@meatloaf396 Then why are you commenting? :-)

[alishanmao]

@xjet He is probably playing with you. he is one of my fans here Bruce, so go easy on him heheheh. I do agree with you on the comment about using DLE engines. those engines are by far the best running ones. I was planning to go a big 100cc plane and I thought I will go with twin cylinder DLE.

[xjet]

@meatloaf396 Of all the Chinese-made gas engines, the DLEs seem to be the best and most consistent. The others simply don't run as reliably or produce as much power (in my experience).

[minameisjake]

@xjet i had a da50 that caused me to crash a hangar 9 carden yak during inverted harrier, it really didn't like the fuel being splashed around, so, i sold that and bought 2 DLE's AND OMG THAT EXTRA 5CC MAKES SO MUCH DIFFERENCE ITS UNTRUE!!!

[stalyoni]

this is why i fly foamy electric planes. Alot less to go wrong. But nice flying mate

[alishanmao]

@stalyoni well mate try once these big gassers and you will love them too

[xjet]

The only Chinese-brand gas engine I'll trust in a model is the DLE. The RCFG, CRRC and others are very poor and inconsistent.

[alishanmao]

@xjet well I am going to probably test a new 9cc Gasoline engine soon bruce. a local company in this province making it. the guy used to be the boss of JBA Engine company but he quits, opens his own factory and making these tiny gasser engines.

[xjet]

@alishanmao JBA (shudder!) I've seen a few JBA engines and have not been impressed at all. Good luck Ali, I suspect you're going to need it ;-) You will fund that a 9cc gas engine will be significantly down on power compared to a nitro engine the same size and, once you factor in the additional weight of the ignition, it's probably not going to be a particularly practical powerplant. I recall that Magnum in the USA were promoting a .55-sized gas motor. It never materialized in the end.

[alishanmao]

@xjet LOL Bruce, JBA (Shudder) yes its here too hahahah. (Shudder again) but hey its worth a try right. I had the same idea as yours but company claims that its selling hot due to its power. we are reviewers Bruce and its our job to see what new (shudders) things are offered from CHina right heheheh

[xjet]

@alishanmao I guess you're luckier than me because you can get stuff a whole lot cheaper eh? I've seen other people here buy products that are so bad I would never waste a cent buying them for review -- and of course only those companies that know they have good products tend to offer free samples for review -- the rest send their products to RCU and RCG for review because they know they'll get nothing but five-stars and rave reviews there :-)

[alishanmao]

@xjet You are right about RCU and RCG reviews bruce hehehe. lets keep up the honesty at our sides though

[TeenFlyer95]

get some retracts for it, then it will go ZOOM

[yittymitty11]

@TeenFlyer95 they never had retracts

[TeenFlyer95]

@yittymitty11 the plane wasnt remote controlled..

[alishanmao]

@yittymitty11 yup

[cloudsplitter24]

That's wondeful. And is super special. We're all very happy for you!

[alishanmao]

@cloudsplitter24 Thank you

[rccrazer]

can i make a request?

can you do some street driving of the redcat racing caldera's? i am getting the sc and my pal is getting the xb

[alishanmao]

@rccrazer ah that will be fun. I was thinking to bring them to that skate part again where we have that ramp that makes RC cars fly :D

[marhar2]

@2:49, beautiful shot coming across the setting sun... great photography!

[alishanmao]

@marhar2 yup that was a best shot.

[TheMilitia123]

A coughing engine one full power is NEVER good! ;)

[alishanmao]

@TheMilitia123 yup lesson learned

[cloudsplitter24]

Sorry you had a hard landing, but I'm sure you'll have it fixed in no time. Its great to see more reviews from you, though I know the little one must be taking allot of your time.

[alishanmao]

@cloudsplitter24 yup Little one sure takes our time but its worth being with that little angel who has learned to throw beautiful smiles, learned to ko ko ka ka more with excitement, can recognize faces of mom and dad :D its just sweet.

[UtubeAdminSucksAss]

Nice, your getting the hang of it. Look forward to the next Gee Bee vid.

[alishanmao]

@UtubeAdminSucksAss will take some time :) gonna try to repair it today if I find some time

[absolutsoju]

Heart was pounding when I heard the motor cutting in and out man.. But overall, Im really impressed by your light-hearted attitude towards the crash.. Id be in post-crash withdrawal if I were in your shoes.

[alishanmao]

@absolutsoju crashes are part of our life. everything can be fixed :D it was good though it did not land in water lol

[brainanator]

nice!

[RIPcombat]

ALI. The Gee Bee looks great flying. did you look up the history of the real full size plane. It was very hard to fly and kill some of it's pilots in crashs. So i think you are doing well on that short runway GOOD LUCK

[alishanmao]

@RIPcombat really :D now I feel better hehehehe

[ksandom40]

Lucky! :)

[baxili333]

You got incredibly with this plane! I just adore the gassers and how they sound! Hope to see more action of that bird in the sky!

[alishanmao]

@baxili333 yup after repairs will fly it more

[rehyde777]

sorry ali i think the numbers are bad luck

[alishanmao]

@rehyde777 nah it happens, no worries

[choochinkaddywompus]

best RC guy in the world is AliShanMao by far no one even comes close you are de best of de best

[alishanmao]

@choochinkaddywompus Thank you mate

[GabrielB1231]

@alishanmao hey ali check out my trex 600 le build and my airplanes

[Vazquez12able]

I tought you crash into the water... But it's alive!

[alishanmao]

@Vazquez12able well i should have let it go into grass and save landing gears. but again everything is repairable

[lpcavedagne]

First! 

[Irush3dId1ed]

first comment? nice job ali. but please get a caldera 3.0 and avalanche xp.....

[alishanmao]

@Irush3dId1ed will try

[bdcp]

atleast you missed the water

[alishanmao]

@bdcp that was the best thing