ghost preview

[AnarchistAaron]

Well you could of at least water-cooled it :/

[MatthewNTRS]

is it possible to make something like this on you own? :P

(i will give it a try)

wish me good luch :P :P :P

[maxreview100]

can some one tell me were to buy this case plz thanks !

[3fferman]

@maxreview100 i made this vid 2 years ago, i dont know if this case would sold today.

[TheReid2]

@3fferman Not much

[RaveV2]

@maxreview100 i know there selling a full built computer just like this on ebay but i don't know if you could just buy the case,but if you ask the guy im pretty sure he would sell you the case

[cyberboy109]

@maxreview100 sunbeam cases...amazon in the uk sells them...try contacting the company direct

[orioncheung]

@maxreview100 go to newegg and search for LOGISYS Computer CS888CL Transparent Clear Acrylic ATX Mid Tower Computer Case Pre-Assembled

[orioncheung]

@maxreview100 you could also google Transparent pc case

[cloudeng]

such a FAG my GOOOOSH

[EliteSaijan]

Nice.

[JEEPGRAND24]

i use to have o a comp just like this except my plexi had a darker blue tint to it. nice, hope it doesnt fail catasrtophically like mine did in 7 months

[IAPOD]

onlt one mistake grey dvd drive otherwise cool comp

[InverseBlue]

Trolol @ thi guy using the top with the fan and using it for the bottom, well done....just wanted to let ya know that bottom piece with the fan hole goes on the top...

[tisMrJoo]

i really hope it still rotates when you're using it.

[CL4WBOUND]

I like the turntable better than the case.

[isacnr7]

cool but then i took an arrow to the knee

[rusasus]

those cases they should make mobo stand off longer so it would be more easy to route the cables trough the back since i did that and it fucked up the sleevs on my cables rubbing on the mobo

[3fferman]

@rusasus the stand offs of this case are ca 20mm long, so there is enough space for cables

[Sheepi94]

how much plexi did u use and how much did it cost?:)

[3fferman]

@Sheepi94 this is a case from the manufacturer Sunbeam so you should could buy it on webshops

[BIOSHOCKFOXX]

Hey...isn't those LEGO cubes under the spinning disk ? :D cus it looks like from LEGO collection :D

[3fferman]

@BIOSHOCKFOXX yes, the turntable is made with lego technic parts

[BIOSHOCKFOXX]

@3fferman creative :)

[bahstrike]

@3fferman instant thumbs-up for that

[BIOSHOCKFOXX]

You spin me right round, baby

Right round like a record, baby

Right round, round, round

You spin me right round, baby

Right round like a record, baby

Right round, round, round

[aaron9780]

what is the point of this video

[3fferman]

@aaron9780 it is only a testvideo for a review. the curiosity is that this preview have more hits than the final video.

[aaron9780]

@3fferman well , I remember clicking this video b/c of its thumbnail, idk if that helps :P How are your temps holding up with acrylic? I had a friend with a red acrylic and he wasnt to happy...

[3fferman]

@aaron9780 well, with a q6600 and a gtx280 at full load and the casefans at 5V i had a casetemp of 30°C. fans at 12V i had 25°C. in both situations the roomtemp was 24°C

[aaron9780]

@3fferman I had a bad first impression of acrylic temps b/c of my friend and your temps seem fine. I believe he was also using stock cpu cooler with smaller case fans with one of those hot ass 8800s and probably no cable management. :P

[aaron9780]

@3fferman then he blamed it on acrylic...

[erikblazer13]

What GPU is that?

[3fferman]

@erikblazer13 its a Zotac GTX 280

[erikblazer13]

@3fferman Damn that is a huge card

[matthew33179]

This was easy to masturbate to.



[toutoun0411]

Is this possible to put the motherboard and the psu on the left side of the case by changing direction the parts of the case?

[3fferman]

@toutoun0411 absolutely no problem. you must simply rotate the front with the drivebays at 180 degrees

[Alankartambe1]

HEY CAN U PROVIDE ME WITH THE CUTTING MAPS? OF A TOWER PC JUST LIKE U BUT A FULL TOWER.. I WOULD PREFER A IMAGE.. IF U CAN PLZ REPLY I WILL MSG U MY EMAIL... THANKS A LOT AND I LOVED THE PC...

[3fferman]

@Alankartambe1 sorry but i dont have cutting maps

[Alankartambe1]

@3fferman aww i will have to make my cabinet by mapping tool? sounds good enuf...

[3fferman]

@Alankartambe1 sorry but it seems that my english is not good enough to understand the sense behind your words

[Alankartambe1]

@3fferman i want to make a cabinet same as yours i just need the measurements of the holes u made what centimeter the holes are and what is the height and width of the cabinet.. i need that data.

[3fferman]

@Alankartambe1 please send me a personal message at the weekend to remind me what you want, then i will look what i can do.

[Alankartambe1]

@3fferman thanks a lot..

[strahinjakyu]

Whether the plate thickness 5mm?

[3fferman]

@strahinjakyu 5mm

[strahinjakyu]

Thank you for your response and jel know who screws used in this housing?

[3fferman]

@strahinjakyu the screws are M4 thumbscrews with a plastic head

[strahinjakyu]

@3fferman Thanks again!

[3fferman]

@strahinjakyu its a pleasure for me if i could help

[Weetbix1969]

i looked at one of these cases a few years ago but found a guy here in New Zealand that made them how you want, mine has an extractor fan in the top and the 2 side fans are at a 45deg angle with 1 blowing across the back of the graphics card and the other blowing on the ram sticks.

why do people do clear cases and not use a modular PSU it creates a lot less mess inside getting rid of all the extra un needed cables.

[FFF693]

Nice:)

[PAPERSCHOOL]

lol a computer case made from a easily melting plastic, thats smart..

[mddogg1]

u should have made top fans

[andreilica100]

Or just all the dimensions of the parts? Thank you! I really want to make one of myself.

[3fferman]

@andreilica100 sorry but this is a case from sunbeam called Sunbeam Acryl Midi tower 9 Bay UV Blue

[andreilica100]

hey 3fferman.. I have a CNC at disposition but I need the CNC file with which this was made. Can i get that?

[razor16190]

@andreilica100 i doubt he would give it for free. :P

[mrbreakstuf]

it would be nice if u had a clear motherboard and other things in clear xD

[MUR4DHD]

hey 3fferman what is the name clear plastic?

[3fferman]

@MUR4DHD it is acrylic glas

[MUR4DHD]

@3fferman thank you sir

[YewGaming]

-.- 8mins of silence

[harryvonlipwig]

well it was just a thought I had I've only had a computer for about a year so I don't really have an idea about airflow yet when I build a rig I'll look into heat distribution more carefully.

[hihihoho1234]

or just skip to 7:00

[dharkbizkit]

A top PSU... thats so oldschool and way more uneffectiv.. I'd discard that case

[QFmedias]

@dharkbizkit does looks hawt;]

[harryvonlipwig]

@dharkbizkit heat rises

[dharkbizkit]

@harryvonlipwig I know. And thats why a psu sucks all the hot air inside and gets even warmer inside the psu. I prefer the new bottom mounted system