Added: 8 months ago
From: SavaMarkovicPilot
Views: 23,892
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (147)

Sign In or Sign Up now to post a comment!
  • @FSXreality No you can't. I have deleted your previous comments as well. If you want me to give you a shoutout you can contact me on PM.

  • What is better? The IFLY B737 or the PMDG737NGX? 5*

  • @TripleDK90 PMDG 737NGX

  • Hi Guys,, Hi boy,, very good video.. I ve have a very simple question,, what I should do to have my weather radar on ??... I m quite sure it doesn t work.. I ve just bought this IFLY737... don t tell me this function needs another pay-download.

  • @strimpo It is not simulated. You will have to buy RealityXP WX Radar if you want that feature. I am not sure on how you can load it to the Ifly Panel though. Your best bet is to check on their forums.

  • First off; At around 47 minutes in you apologize for you English. None needed, my friend. Second; Thank you for the very good tutorial. You have helped me get my new iFly 737 in the air, and more importantly, back on the ground.

  • Hi,

    Great Vid !!! It helped me a lot !!! It must have taken sooooooo long to film it !!!

    I was just wondering:

    1. Could you make a video about the descent, but explaining it in more detail ? That would be great !!!!

    2. Where did you get the add-ons you used, and what are they called ?

    And by the way, your English is very good !!!

  • @lukecolli98 also, I know it sounds stupid, but how did you get the waypoint (PUSTA, KEROP , etc.) ???

  • Super! You helped me!!!

    THX!

  • I can send the checklist?

  • you dont set auto brake

  • Thank you Sava, for your hard work, it's always useful to watch these step by step tutorials

  • Amazing amazing amazing amazing video!!!!! it healped alot thanx,,, iwish you could answer my question fast, i want my aircraft to fly by GPS, how do i do that? in the nrmal b737-800 of fsx there is a switch to choose between GPS and NAV and called GPS/NAV

  • @FaoodX You can't do that in a real 737 and this is why it is not modeled in the iFly 737NG. Use the FMC instead, it is way easier than using a GPS when you get used to it.

  • Phenomenal video!

    I have a question, you say to start at least one fuel pump before switching the APU on, but I used to think that with just the battery power, the fuel pumps can't be turned on, as a result you see "LOW PRESSURE" when you turn on any fuel pump before starting the APU. I thought there was a reserve fuel supply to start the APU without starting the Fuel Pumps. Am I right?

    Thanks

  • @SavaMarkovicPilot e ae mi kazi iskreno u kom razredu su poceli da te zanimaju avioni? :D

    p.s. dobar tutorial :)

  • @PavkeTV Od kad sam bio mali :)

  • great video man! your english is also very good! I'm ordering this addon now so I can fly with your procedures! Thanks very much!

  • Hi. I have some problems with my fmc. When I am typing manually in the fmc only one letter comes up in the scratchpad. I can't type multiple letters in the scratchpad and i can't enter them in any inputs.

    Do you have an idea what is going on?

  • Very good video,I like the scenery at both Airports. I always use autoland, works good, but I find it hard to land the plane manualy . Yours landing very good, How did you do that? Could you teach us some tips. Thank you!

  • Great video, really helpful. Your English is great.

  • Hey your English is VERY good. You speak it better than some Americans... Great video, as well.

  • @EchoNiiner Thank you

  • If i try to set the fmc I always get a report: not in database. Do you know what I should do?

  • @airdavid4 update your AIRAC maybe

  • @airdavid4 Open FSX as administrator.

  • Thanks for this cold and dark startup useful tutorial...nice work !

  • I think your english is very good :-)

  • in the beginning you say that it are softkeys on the fmc but it are line-select keys

  • I like your video

  • Always have the problem, the AP doesnt engage :(

  • @dfsauruguaya Make sure you're tuned to the ILS frequency. I'm no expert but thats all the advice I can give till an expert comes :)

  • @dfsauruguaya try to egage it wiht full power in the engines, it will work

  • great video, you´r exellent and nice work i hope you upload more tutorials of the ifly 737. this video is a great tool for me because i love the ifly 737 and i want to learn about it. tanks man, and again, nice work

  • Can't thank you enough for this :) I love starting up from cold, just feels that more immersive and realistic, but some manuals I can never grasp or get it to work, videos like this help me extremely!

  • Nice Video.You are awesome.Where did you get that thing of the pushback?

  • @kairurock It is AES v2

  • i have problem with the fuel i dont know how to configure it to the plane

  • Great Help!

  • Approach please? Sorry for three lines. Big fingers. Thanks and regards from the Netherlands, Ed

  • On rw20. Are you able to tell me what i have to do to get a good approachnpl

  • Hi Sava, the first person who tells me how to setup and start up Ifly 737! Thanks!! I have tried to setop CDU from Ehrd to Ebbr. I can not setup the waypoints correct to get landed om

  • Can someone please help!! Whenever I type an airport code into my route page, it syas "not in database" but i know im using the right code (LFPG for CDG). Help would be greatly appreciated.

  • @gsmart13 You can try upgrading your AIRAC, Merry Christmas!

  • can anyone tell me why i cant turn on cmd a either by clicking it or pressing z even after ive executed all the flight data?

  • @blimpstatio I have the same problem with the CMD (can't click the autopilot button) so i know that two problems case that:

    1. the joystick should be at null zone.

    2. the trim must be set

    My problem with the trim, how can i see the trim number, the pmdg had for example pop out note that show the trim when the mouse cursor on the trim, how to see the trim in the ifly 737 ?

  • Don't have the iFly 737NG yet, but I've added this to my favs just in case ;)

  • Nice video! Ive just ordered a ifly 737NG FSX and have not tested it yet. You said there are some bus in descend fmc system. What kind? Thanks

  • dont worry about your english you speak english good ;) understood every word :D good tutorial before I watched this i knew nothing, now i know how to fly :D

  • Excellent Vid.

  • A totally fantastic tutorial. It's going to take me a while to get my head around all this, but I have a good start!

    MANY thanks indeed for being such a fantastic teacher and offering your time to create this tutorial.

  • SavaMarkovicPilot, i've didn't understand with when to know to descent, can you please help me???

  • what scenery pack is this

  • Fantastic tutorial.. so informative ..and mate.. your English is perfect easy to understand and the way you explain the tutorial is excellent...have watched many others and this is a classic ..well done and thank you ........ old simmer 60......

  • Hi, I have downloaded this, but when Load the flight the panels (pfd and etc) do not load

  • How do you change the distance shown on the mfd for tour route

  • he forgot the lavatory button, lol

  • what scenery pack is this???

  • nice one learnt a lot, your english is not to bad some english people are worse

  • I need help with the autopilot.. It doesn't seem to work at all...

  • according to what do I select the heading course and STAR?

  • @NSRacer114 current approach charts in real world, in sim what ever you damn well feel like.

  • When i enter THE zero fuel weight in Tons it says invalid entry

  • dude i have a problem in the fmc, i am only able to enter one digit in the scratchpad and if i press another button , it replaces the digit.

    help

  • Excellent video thank you for this video

    And your english isn't a problem ;)

    More videos !!

  • Excellent job! Thank you.

  • hi man wonderful job on the tutorial. very detailed. after takeoff my autopilot won't activate, are you able to help with that?

  • Hey Buddy, I too, am a pilot and thought you did a wonderful job. So much so, that I promptly ordered the software. Your effort really sold me on the iFly737NG. And, guess what!!! You speak English better than some of your classless critics!!! Thanks again for a job well done!!!

  • @GeoBear09 That means a lot! Thank you! A sub is appreciated.

  • @SavaMarkovicPilot I followed along with the pmdg 737ngx flawlessly! Great work :D

  • but took my our for the turorial, and found the l nav and the vnav now understandable and follow your peocedure on turning on the autop. and the decent method really helped me out, thanks due, appreciate it.btw, y do people think your voice is annoying, i could hear u really clear, ure pretty good at english, it's just your accent,

  • Comment removed

  • @rsm2000e Then don't watch it and read the manual.

  • @rsm2000e If you are a real pilot, you will encounter many accents. Get used to it now, or find a different hobby.

  • gotta ?. wat do u mean with info. papa, like i.e also juliet, zulu, quebec, wat in gods world does that mean?

  • @201andrew ATIS :)

  • @SavaMarkovicPilot what website did u get the routes from????

  • @201andrew rfinder. asalink . net / free

  • how the hell did u make a 1 hour vid!!!!????? but thanks dude, very good vid, really helpfull, and i thought that uwere a girl on your vatsim tutorial vid

  • hello im a real pilot and i would just like to say your doing a very good job. well done.

  • Do you want to be a pilot? Like real life?

  • Thank You for the great tutorial. Don't worry about your English at all, its great, and your vocabulary is very good as well. It sounds like it took a bit of time to complete it with all of the FS crashes! Thanks again for the video!

  • is this fs9 or fsx

  • @dratina55 It's for both.

  • Whoa.... your voice got deeper o.o I was watching your other video on the FMC

  • You sure do know your stuff. I am looking at getting ifly b737 and i will be using this video to teach me the best way to fly, so thanks :D

  • YOU HAVE ANNOYING VOICE !!!!!!! ARRRRRG :((((

  • @artur4467

    What the fuck does his voice have to do with anything? He is trying to teach YOU something you don't know..

    People are fucking idiots.

  • @artur4467 Then don't watch the video. Go ahead and watch the one on german/arab.

  • hey... can you make a tutorial just for how to use the ILS???

  • I really really really really really wanted you to use autoland for this flight. It's kinda the only reason I clicked on it but I got say other than that, by far the best iFly 737 tut on youtube and thanks to you my iFly experiance has been worthwhile. See I tried to fly this like a default aircraft knowing that I could use all those cool options, but I realized that using its features arent that difficult and I've been having alot of success with my VA. btw what other addons do you use?

  • how i can find the amount of reserves? index cost?

  • @saprisista94 reserves you need to make a complex fuel calculation, so just put 0.1 and cost index always 99.

  • how come inside the cockpit its lagging if your running a corei7 920 +OC

  • @Flightmode747 When does it lag?

  • @SavaMarkovicPilot @20:45-20:50 but its only laggy when in the cockpit is it the addon ??

  • @Flightmode747 Its not lagy. Its just the way that AES handles the pushback/marshaller and on top of that my rapid POV movement that are too fast foo the bitrate selected in Sony Vegas. It was silk smooth.

  • just saying, that atc stuff you did around 12:00 is completely fake....

  • @penny2g3 Of course it is fake. :) I wasn't using VATSIM.

  • @SavaMarkovicPilot okay, just making sure :)

  • what scenery is this... and how do you make the pushback so realistic??

  • @CrYsTaL0796 The pushback is by AES. Scenery for LHBP is Aerosoft and for LYBE is SkyHighSim..All of which are payware.

  • @SavaMarkovicPilot ok thx and nice tutorial... it helps very much! :)

  • @CrYsTaL0796 NP! Sub if you found it helpful!

  • how do u know the names of the waypoints for the fmc?

  • @saprisista94 rfinder. asalink. net / free

  • @SavaMarkovicPilot ok thanks!! and were do i put them? on the left or right side of the fmc? (via... or to...)

  • @saprisista94 waypoints in TO, airways in VIA

  • how do you get all the weight amounts?

  • @saprisista94 From either the FS Payload panel or using the loadsheets (my method, harder but more realistic)

  • @SavaMarkovicPilot where i can find the loadsheets? sorry because of all the many questions i have done..

  • why did my engines won't start, i do what did you just did and my engines won't start... it's says OIL PRESS 0 and it is red... can you help me please :)

  • Nice tutorial. Your English's was fine to me. It was simple and clear.

  • @OlDirtyBond Thanks very much! If you like, sub for more. The NGX is coming :)

  • E matori,imam par pitanja.

    -jel ovo fsx ili fsx2004 ?

    -Da li koristis drugaciji ATC,neki add-on,ne znam,posto sam video u jednom drugom tvom klipu da je drugaciji ?

    -Koliko imas godina,i da li si pravi pilot ? :D

  • @Stajke93 fs2004. Ne letim offline nego na VATSIM mrezi. Nisam pravi pilot.

  • @SavaMarkovicPilot Pojasni mi molim te sta ja VATSIM ?

  • @Stajke93 google je tvoj prijatelj...imas tutorial na mom kanalu.

  • @SavaMarkovicPilot

    e hvala,poceo sam da korstim,odlicno je.

    A mozes da mi kazes kako da ja budem u ATC-u ?

  • @Stajke93 scgvacc.net /forum moras da polazes ispite.

  • thanks for that tutorial, watching it a few minutes, and its great! gonna use that with the NGX that is coming in a few days :)

  • @MyEmpire91 No need for that. I will be buying the NGX as soon as its released and make an entire new video..1h long probably. I have overclocked my CPU and its now running at 4.0Ghz..you can expect a high quality video. Check my specs on my channel.

  • @SavaMarkovicPilot oh good news, gonna wait for it , thanks!

  • @MyEmpire91 no prob.

  • A koja je ovo igrica tutorial je odlican gledacu ga do kraja,jel i ovo Microsoft Flying Simulato 2004? :D

  • or may i do the flight with autopilot but without fmc??

  • yes it is a pirate version... how can i update it... or in which carpet are the airports?

  • i already install the newest AIRAC... but it still saying not in data base on the FMC... and i checked that a dont put space... help please!!

  • @saprisista94 You can try and reinstall the plane. The iFly forums are really the place to go. Taking in consideration that you dont have a pirated version?

  • i have problems with the fmc... because when i introduce my ref airport which is kmia (miami intl) and its says not in data base....

  • @saprisista94 confirm you aren't accidently typing a space before it if using keyboard _KMIA instead of KMIA.

    Also get the newest AIRAC from navigraph and check the ifly forums for support.

  • hallo sava......i have 737 on fsx, there's a bug, everytime that i try descend under 4.000 feets, v/s accelerate over 3.000 feets and my plane sinks....do you know how to fix that bug?

  • @indianDreamCatcher1 Not sure. Try using manual V/S and check on iFly forums :)

  • Great video my friend! I learned so much. By far the most informative tutorial on FSX I have ever watched. You covered all the bases. I appreciate your hard work!

  • @evdude2005 Thank you! Means a lot!

  • Odličan video! Puno mi je pomogao, a najviše FMC :)

  • Thank you so much for making this tutorial!! You done an excellent job!

  • @Vansers Thanks!

  • Really really good video tutorial :) I wish all fs tutorials were 1 hour long lol! 1 thing to tell you though. The apu runs of the left forward pump only ;) real world.

  • Nice vid mate! :D Why didn't you use the green livery? It's EPIC! :DD

  • @pereduranofcourse like this one better :)

  • zar ne bi trebalo 250 ispod FL100 :D ?

  • @prikljucak trebalo bi :) spomeno sam to al sam ja malo brze uleteo :))) Nema veze :)

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more