Never lift the mirror by hand, read the handbook, then use the sensor cleaning mode. Never put a cheap brush/ blower like that anywhere near your open camera. Use a Giotto rocket brush. Use an Artic Butterfly or if the sensor has got really dirty use a Sensor Swab Type 2 w / Eclipse Cleaner for a K10D.Check the Eclipse web site for the recommended swab size for your camera.
@spcmn77 Depends on what type of dot it is. Also, if you're talking about one of those compact digital cameras, I wouldn't risk it. They're not meant to be taken apart so you could very well damage it if you do.
If it's a shadow-looking, out of focus dot, then it's a foreign matter particle. If it looks like a tiny little light in your pictures, then it's a stuck pixel, and there's really no way to fix that other than through image touch up. Hope this helps!
This is ridiculous. NEVER! EVER! EVERRRR! Lift the mirror with your finger like that! EVER! You'll completely fuck it up if you do it like that enough. Canon and the other companies didn't put in the "Manual Sensor Clean" mode so some dumb ass can go poking around in the body and around the sensor.
Also, take the brush off the blower! If you don't, you're blowing all those little bits of crap back onto what you're trying to clean.
The lens she cleaned was all hazy and smeared afterwards! ugh!
Hi. great video Veronica!. Now, How do you totally service including changing rubbers on Canon SLR's like the canon AV-1 Canon EOS 630,650,750,850,500? Posting how to service a pentx k1000 and nikon SLR's would be great as well. Thanks for listening.
this is a bad tut, should not use finger to lift the mirror and the brush comes off the air blower....to actually make it an air blower ...props for wanting to inform though. did have some good tips like rolling up the sleeve.
Seriously seriously misinforming video.
TitaniumGray 6 months ago 2
Ignore this nonsense video.
Never lift the mirror by hand, read the handbook, then use the sensor cleaning mode. Never put a cheap brush/ blower like that anywhere near your open camera. Use a Giotto rocket brush. Use an Artic Butterfly or if the sensor has got really dirty use a Sensor Swab Type 2 w / Eclipse Cleaner for a K10D.Check the Eclipse web site for the recommended swab size for your camera.
bilsomprop 7 months ago 2
bad video,hot girl
terrible mix LOL
classclownee 9 months ago
OMG, it is said before, but indeed; don;t use your finger and don't use the dusty brush thingie to clean it, it could make it only worse.
MrLeeAIS 1 year ago
@spcmn77 Depends on what type of dot it is. Also, if you're talking about one of those compact digital cameras, I wouldn't risk it. They're not meant to be taken apart so you could very well damage it if you do.
If it's a shadow-looking, out of focus dot, then it's a foreign matter particle. If it looks like a tiny little light in your pictures, then it's a stuck pixel, and there's really no way to fix that other than through image touch up. Hope this helps!
RB5566 1 year ago
Kinda sucky lighting for people talking about high-end cameras huh?...
DamageIncM 1 year ago
shes fuckable so she can say wahtever the fuck she wants you dipshits!
Stunna84 1 year ago
Veronica is retarded!
DeloitteDouche 1 year ago
how the hell can you say "check the manual for sensor cleaning mode" and then proceed to flip the mirror up using your FINGER?!
This is a horrible tutorial for that reason alone.
jernov 2 years ago 12
wot a load of crap
lukkbox 2 years ago 4
This comment has received too many negative votes show
shes a woman, what did you expect lol?
owenbarke 2 years ago
don't watch this video......very baddd
durtydurtyhri 2 years ago
this is BAD~!!
1: NEVER TOUCH THE MIRROR BY FINGER
2: SHE DIDN'T CLEAN THE CMOS
3: WHAT A CRAB~!
lausteve 2 years ago
that was crap,she was fit tho
butlerscabin2008 2 years ago
Are you serious ?
JokkesMovies 2 years ago
This is ridiculous. NEVER! EVER! EVERRRR! Lift the mirror with your finger like that! EVER! You'll completely fuck it up if you do it like that enough. Canon and the other companies didn't put in the "Manual Sensor Clean" mode so some dumb ass can go poking around in the body and around the sensor.
Also, take the brush off the blower! If you don't, you're blowing all those little bits of crap back onto what you're trying to clean.
The lens she cleaned was all hazy and smeared afterwards! ugh!
RB5566 2 years ago 29
@RB5566 Thanks for that!!!! I was just about to lift the mirror then I saw your comment. You saved my Camera!!! This video is fucking messed up.
daddlepops 4 months ago
@daddlepops Not a problem. :) Glad I was able to help.
RB5566 4 months ago
really Didn't help me alot
20dark20 2 years ago
never use finger to lift the mirror. this sucks
Overhax 3 years ago 4
Hi. great video Veronica!. Now, How do you totally service including changing rubbers on Canon SLR's like the canon AV-1 Canon EOS 630,650,750,850,500? Posting how to service a pentx k1000 and nikon SLR's would be great as well. Thanks for listening.
FrenchGuitarStinger 3 years ago
Never use a blower with a brush attached!!!
Nunsweepit421 3 years ago 2
this is a bad tut, should not use finger to lift the mirror and the brush comes off the air blower....to actually make it an air blower ...props for wanting to inform though. did have some good tips like rolling up the sleeve.
openmindtruthsayer 3 years ago 2
Shouldn't really lift mirror with hands. On canons there's a mode which lifts it for you in the instructions.
vampalan 4 years ago
Yes.. And in case other people don't know it, its in the menu, under manual cleaning function
tingmg 4 years ago 3
its on my Nikon too...very easy setting. press shutter to lift, the shut off to release.
lckyl16 3 years ago
*then shut off
lckyl16 3 years ago
I'm gonna be honest with you guys. I didn't watch the green clothing episode. I tried to, but I'm just not that interested with clothing.
TastyQQQs 4 years ago