Halo armor/ gears of war armor tutorial - pepakura tips and scaling

[OfficerRyman7]

:o I should be starting soon

[xxsilen9xx]

Alright thanx ill try it when I get home

[xxsilen9xx]

Cool shadowscorpion19@yahoo.com thanx

[freshbreath3]

@xxsilen9xx send it already

[xxsilen9xx]

Were did u get this file at

[freshbreath3]

@xxsilen9xx I'll send it to you on email

[Doomcell3]

Can you send me the file for this helmet? It would be most appreciated.

[freshbreath3]

@Doomcell3 sure my email is slawrence23@yahoo.com

[yahernadez]

If anyone has the PDO for this helmet, please share.

[NerfSpartanKeo]

How much would it cost to build a full set of COG gear from the ground up for an average size adult male (Not counting gun) ?

[freshbreath3]

@NerfSpartanKeo $300-$400

[LegendaryGod25]

Alright sweet thanks man

[LegendaryGod25]

hey bro do I just scale the height? do i have to wrry about the width?

[freshbreath3]

@LegendaryGod25 not really, if you measured yourself on the height and width, the width will change when you change the size, so just make sure you measure it right

[CrashTeamCA]

What does the depth do? how do i scale that

[freshbreath3]

@CrashTeamCA how big do you want the helmet, and use pepakura designer to scale, watch the other videos to help you out

[spade2287]

how did you get the cog armor files on pepakura???

[Mallwiil12]

Thanks.

[Mallwiil12]

When using the program, is there a specific paper you use? .

[freshbreath3]

@Mallwiil12 yes , paperstock/ index card stocks at officemax / office depot

[OfficerRyman7]

@freshbreath3 how hard is pepakura? like if the armor will be durable, not rip like regular paper

[freshbreath3]

@OfficerRyman7 you must get Index card stocks/ paper stocks in office max/ office depot, that is strong enough for fiberglass resin

[OfficerRyman7]

@freshbreath3 oh thanks, I'm making COG armor out of a motocross chest armor (i'll paint the designs on it) and my cousin and I are making a Pepakura Anthony Carmine styled helmet

[OfficerRyman7]

@freshbreath3 What would you might use for a visor? you know those eye visors on the helmet they look out of (Blue eyes on the helmet)

[OfficerRyman7]

@freshbreath3 The only thing I'm making is Anthony Carmines helmet and just the upper chest armor

[freshbreath3]

@OfficerRyman7 I have those files as well

[OfficerRyman7]

@freshbreath3 Do you know where I can install/ download them onto my laptop/ computer?

[freshbreath3]

@OfficerRyman7 i can send you them on email

[OfficerRyman7]

@freshbreath3 my email is frankwest34@gmail.com, it even says it on my youtube bio thingy. btw, after I'm all done with that card stocks/ paper stocks I just use hot glue to put them on the helmet and chest armor and I print the pepakura pieces out with my printer? sounds pretty easy, except for the hours of cutting put that wont matter as long as it gets A. Carmine / COG Gear uniform :D

[freshbreath3]

@OfficerRyman7 yes, download it in there

[OfficerRyman7]

@freshbreath3 and I will use measuring tape (I think the one that comes out of the measuring thing that contruction workers use is ok too) and I can find Bondo at places like home depot? Fiberglass resin (Paper stocks from officer max/ Officer depot),

[OfficerRyman7]

@OfficerRyman7 ._. crap, I'm using a Macbook Pro, I downloaded it but when I open it, it goes into Text Edit and says all these random words everywhere. Here are the Pepakura Designer requirements Pepakura Designer runs on Windows 7/Vista/XP/2000. I'm using a Phone hotspot (I just recently moved) And don't have real internet. I have to wait to get real internet so I can use my Dell :\ For now I'll get the equipment like paperstocks (fiberglass), Bondo, Ruler, Measuring tape. D: D:

[freshbreath3]

@OfficerRyman7 sorry man, but good luck though

[OfficerRyman7]

@freshbreath3 Can't keep the COG spirit down c:

Windows 7 does work, and I will use the laptop for pepakura designer

[OfficerRyman7]

@freshbreath3 So when I fold the paper, what do I use to attach them? glue, clear tape, hot glue? since I'm putting that fiberglass cloth on then the bondo, I could just use glue because the Bondo and fiberglass cloth basically will take care of it right

[freshbreath3]

@OfficerRyman7 use hot glue to glue all the pieces, after that put fiberglass resin on the outside, when it's dried put fiberglass resin and cloth on the inside

watch the fiberglass video on my channel to help you out

[OfficerRyman7]

@freshbreath3 whats you xbox live gamertag? mines is COG Pilot, but Im going to change it to Seth Carmine :\

[freshbreath3]

@OfficerRyman7 KSI SvnLawrence, I'm not in the clan anymore if you're wondering, I might be on today

[OfficerRyman7]

@freshbreath3 on Gears 3 I'm trying to unlock Anthony at level 75 D: but my hotspot 3G/4G sucks kinda so I might have to wait to get real internet but we can give it a try, for now I play as Onyx Guad/ Clayton Carmine. Whos your favorite Gears of War character?

[freshbreath3]

@OfficerRyman7 clayton carmine

[OfficerRyman7]

@freshbreath3 mines is anthony carmine :D

[OfficerRyman7]

@freshbreath3 so we use paper stocks for the printer instead of putting regular copy paper in it? are paper stocks the same size as copy paper?

[freshbreath3]

@OfficerRyman7 yes the paper stock/ index card stock are the same size as copy paper, the paper stock/index card stock is stronger and it will print out well

[OfficerRyman7]

@freshbreath3 thanks clayton :D, Im starting chest armor first, helmet seems more harder like you said with all the little pieces and plus, of course the helmet will atract alot of attention D:

[freshbreath3]

@OfficerRyman7 got it, send it to you already, but beware, you need a ruler to fold perfectly and watch for the blue lines and sky blue lines

if you have question, I'll do my best to answer it

"I COVERED WARS YOU KNOW" LOL

[OfficerRyman7]

@freshbreath3 Carmine knows his way around a line, or two.

[OfficerRyman7]

@freshbreath3 Me and my cousin will be doing this, I'll be doing most and when we have time he can help and stuff, thanks for the files :D the armor and helmet will look awesome :D people will probably refer to me as tiny carmine since im still around 12 - 13 D:

The helmet should be the easiest and for the boots, I wear these random winter/snow boots that look similiar. One important wise thing people should do is put the paper stocks first before painting, it will wet the paper D:

[freshbreath3]

@OfficerRyman7 well of course but you have to resin the paper stock and put bondo on it before you prime it and paint it

[freshbreath3]

@OfficerRyman7 well of course but you have to resin the paper stock and put bondo on it before you prime it and paint it

[OfficerRyman7]

@freshbreath3 what do I do once I download the and carmine helmet and chest armor? D: I found them on finder (Im using a mac laptop, but I do have a PC computer)

[OfficerRyman7]

@freshbreath3 Do I download the Pepakura designer from tamasoft.co ?

[OfficerRyman7]

@freshbreath3 However, My mom still has a Windows 7 laptop, I'll give that a Try

[RAWRxBlueDino1028]

hey great vid but can u maybe give me a link to where u downloaded the gow clayton file?

[TheRollingLolLol]

hey man, how the hell do i scale my gears armor? im at a stand still cuz i dont have alot of ink left and i dont want to waste it on something that doesnt fit

[freshbreath3]

@TheRollingLolLol excellent question, use the measure tape and measure your chest from your armpit to the other armpit

use pepakura designer and go to scale factor,

measure the width of your chest, if it match then leave it, but if it's too big or small, change the scale

but note to self you will have to move pieces if you change the scale, so make sure all the pieces on each pages

I hope this helps, but i didn't make my chest armor yet, but i did get my answers on 405ht.com

[TheRollingLolLol]

@freshbreath3 i knew how to input the scaling factor and moving the pieces around cuz i do alot of halo pepakura, i just didnt know gears scaling...so what if i wanted to scale shoulder pieces or shin pieces?

[shadow0imposter]

@TheRollingLolLol could you help me out with the halo scaling then? i have 3 helmets all the wrong size and im kinda discouraged to build a full suit now :( any help would be awesome!!!

[TheRollingLolLol]

@shadow0imposter well there are many methods, ill pm you the few i use

[freshbreath3]

@TheRollingLolLol well i have print out the shin pieces, you might want to ask that question in 405th.com and post it in the noob forum

[TheRollingLolLol]

@freshbreath3 yeah ive been a proud member of the 405th for about a year and a quarter? maybe year and a half and there arent many gears builds out there

[freshbreath3]

@TheRollingLolLol yeah i know but i want to be one who did

[DIGITALXxXDRAGON]

its bond by the way

[freshbreath3]

@DIGITALXxXDRAGON ?????

[DIGITALXxXDRAGON]

@freshbreath3 bond sorry



[freshbreath3]

@DIGITALXxXDRAGON you mean bondo

[DIGITALXxXDRAGON]

@freshbreath3 sorry i mean this spell check sucks. your correct its bondo

[frankthetank5087]

@freshbreath3 rondo is bondo mixed with resin. i thought the same thing when i first saw this video but then i googled it lol

[greenthrash99]

hey man, did you get those files from the A1TD thread on the 405th? cuz im looking for some but the low def's arent unfolded

[freshbreath3]

@greenthrash99 well it's in the gears of war 3 section, it says it right there clay carmine unfolded

[greenthrash99]

@freshbreath3 yeah but i cant find the low defs

[SuperSkilledGamer]

hey man is the clay carmine helmet the only helmet on pep? cuz i would rather make anthony..

[freshbreath3]

@SuperSkilledGamer no there's anthony's helmet as well

[Thezzzexybeast]

hey very kool helmet good job. hey could u make that helmet out of foam??

[freshbreath3]

@Thezzzexybeast i don't know how to use foam mats yet, i need a tutorial for that so i can make clay carmine leg pads

[Thezzzexybeast]

@freshbreath3 oo ok thanks tho. if u need a tutorial watch ''Build Some Sci Fi Armor for CHEAP : DIY'' that video kinda shows how to work with foam

[freshbreath3]

@Thezzzexybeast thanks i'll search it up

[inuboy22]

awesome helmet, wear it when getting gears 3

[freshbreath3]

@inuboy22 I WILL!