General Maintenance

[THEBEASTPB]

how often would i have to lube my mini?

[happytime123456]

Do you have to lube the O-Rings back on the black bolt thing? or can u just lube the front o-rings on the black bolt? if thats enough? And one more thing, the white and gold thing inside the black bolt... how do you maintain that one? if u have to maintain it.. i dont know =P and du you have to do something with the solenoid thing? ive heard somebody say that...!?!?

[paintballobsesed]

Canadiansoldeirsrock you need to a screw your tank in better or b put a be o ring on your tank the reason that hole is there is so pressurized air spews out the instead of waiting till ur on your last thread and the pressure in between your tank and gun throws your tank off your gun chipping you threading it's like a safety realease

[folkloricjungle]

lol i like how not even invert uses the lube that comes with the mini :D

[TxCardinalFan]

@Canadiansoldiersrock there is a hole in mini too just like you are describing it. I think it is supposed to be there

[ipodnanoguy12]

what gen is this.

[woodsballproductions]

there all the same as in the bolt

[Gangsta4life235]

where are the eyes on the mini and how do you clean them?

[wiilikepie]

Its not like other guns, you should never nead to clean your eyes, they're built into the gun.

[durtrider55]

hey can i use a hpa tank on the mini? please reply.

[hardvvood]

yes

[knis2me2]

omg lol yes DO NOT USE C02 lol

[Buferd]

I use TechT Gun Sav and it is amazing to lube my gun. Just a little bit will do.

[weedisanecessity]

my mini bolt is leaking what should i do

[I337MajorPaintballer]

did u try to replace your O-rings??

[weedisanecessity]

yeah all fixed now thanks for the suggestion though

[NateAtWar]

can you use hater grease on this gun ??

[lanningyoass]

yes

[invertpaintball93]

what is the best paint to use fir the mini

[sebas805]

evil

[lonewolfriot]

rps premium if you can afford it it goes for about 75 a case.

[RoyRaptor1]

no, they go for like 50-60 a case.

[lonewolfriot]

nahh bro at my shop its 73.55 i know its expensive but its a small shop not a chain and they prices are a little steep.

[paintballerzlbr]

where can you buy dow 33

[Coryejohnpaintball]

smart parts sleek is the same as dow 33

[ROCKSTARburner16]

where can you buy dow 33

[xacto4563]

haha

[Coryejohnpaintball]

smart parts sleek

[miniowner99]

if the spring that goes on the bolt guide set up wrong wat can that do to the marker itself??

[crazypaintball25]

where can you buy dow 33

[daveolso]

Did this to my gun just now.. Seemed simple.. Now it's leaking a little air out the tip. I can hear it from the feed neck.. Fired it a few times and still does it.. Took it apart to check.. But still did again.. Ideas?

[3birds1stone]

Make sure you put the spring on right.

[daveolso]

The spring did snap in like you said it would.. I'll pop it out again and check it. It's a small little hiss.. I change out the rings on it also. Didn't seem like it made a difference. The Pro shop here will fix it for free if I can't figure it out. Thanks

[Nolanpb1090]

get a chrono and chrono it to your field specific velocity and the leak should go away!

[senkosseventyseven]

you need a new poppet valve sorry dude

[daveolso]

Wow.. Brand New gun and it already needs a new Poppet valve! It's only been used 6 times. And all I did was relube the bolt rings on the inside and outside.

[coltskid167]

does the invert mini come with dow 33 and where can u get more of it also how often should the springs b changed??? and are the springs the same thing as spring detents???

[jmok222]

I believe Dow33 is the same thing as Sl33k lube by Smart Parts, Look at a online paintball store to find and get it. Im not sure when to get springs changed but ive used my mini for almost 6 months and theres not problem.

no, the springs are not the same as the spring detents. theres a Spring that pushes the bolt back. The spring Detents are regular detents(with springs ejecting them) that keep paintballs from rolling down your barrel before shooting the gun.

[daboi45]

whats the lube that comes with the gun?

[crysisman14]

esier to miantian than the ion you got to take the ion all apart.

[crazypaintball25]

how often do you have to change the spring

[TSMColby]

what kind of lube is in the yellow thing? dow 33? or what?

[minitortas]

On the Invert MINI Manual they recommended dow 33

[TSMColby]

ya, i know, but does the gun come with dow 33? or another kind

[acr829]

Does the invert mini already come with dow 33 in the little yellow tub in the toolbox?

[xPbLxInvert]

yeah

[LongShlong36]

Can i use hater v2 sauce instead of dow 33.

[ghostwarrior89]

yes

[vhockey2121]

my mini is firing fine for the first shot then it is shotting like it has low air and the bolt isn't coming all the way forward

does anybody know what to do

[xPbLxInvert]

i had that same problem its probably ur tank its not screwed all the way in it is hard to screw ur tank on the first time then after the first it is really easy but screw in ur tank ALL THE WAY!!

[vhockey2121]

i tryed that but it still is doing the same thing

[LongShlong36]

lube it

[vhockey2121]

i did

[JcM944]

lol it took me 2 days to figure out what lube to use on the gun. Im like which lube and then i searched it on youtube. nothing. Then I searh invert mini maitnence. Then their it was. Took awhile tho

[SpeedBaller45]

srry for double post.

[GnomeTrooper]

HOLY SHIT WE GOT NEARLY NUTHIN TO DO NIIICE....u can even do that after every single playin day its so quick...i mean,the sir did it in 2 minutes after all

[paintball164]

HEY!

its like the vs1 :O

but the vs1 is shit compared to this..yes i know

[magicAAA]

Those vid´s were a tremendous help for me!

Thanks alot =)

[arnimann94]

thanks for making this video!! it helped me a lot!

[jjdinning]

should you clean you popet regularly

[JcM944]

Reccommend it. You dont want to go on the field and your gun screws up on you do you.

[kDecK55]

i just got my mini not long ago.. dont know much about it but i took it apart to clean it and i unscrewed the lil thing in the back with the invert logo on it and i cleaned and lubed it and but everything back on correctly and put air on it and it is shooting the balls maybe 3 feet.. any suggestions??

[Theshortasian1020]

check your dwell and make sure its not too low

[goldwest57]

Turn up your velocity if you screwed it in all teh way then the velocity is set very very low

[SpeedBaller45]

that little thing with the invert logo printed all over it is the velocity adjuster. You screwed it in all the way so you are going to shoot at very low velocities. Get a chronograph and slowly rotate the adjuster out untill you get your desired velocity.

thats why your shots are only going 3 feet.

[SpeedBaller45]

that little thing with the invert logo printed all over it is the velocity adjuster. You screwed it in all the way so you are going to shoot at very low velocities. Get a chronograph and slowly rotate the adjuster out untill you get your desired velocity.

thats why your shots are only going 3 feet.

[macceruk1]

i have a small leek on my invert mini and i cant find were it is. all i no is that its comin from the inside of the feed neck... has any one had this problem b4?

[JordanTheBassmasta]

Try resetting your poppet, by turning your velocity adjustment in all the way and then back out. If that doesn't work I suggest you go on PBnation and ask those guys, they know a lot more than I do.

[ftfpaintballer]

take off the tank. turn in the velocty all the way but not super hard. screw on tank. if it stopped leaking then adjust the velocity. do this every time. if it still leaks, buy a new desingz o ring kit and replace it. maybe your noid is broke to so look around

[xaboo]

IF i was to break paint with this gun, could i remove the 2 peices inside, the bolt assebly stuff, and just run a squeegee through the entire gun, from the back to the front? or would i have to worry about filling some air hole with paint?

[killersquid4]

Yeah, it's like one of the better features, since it's so simple. But it never breaks paint =p

[zpaintballler]

what do you do if there is a slow air leak coming through the bolt and its not the regulator pressure

[invertrecon]

take the biggest allen key turn the velocity all the way in. then bring it out as far as u leik ur fps. that should reset it, i had the same thing happen

hope i helped u

[ftfpaintballer]

yeah take the tank off then trun in then put tank on then adjust

[ch33ze0g]

should I get this or the eclipse etek 2

[zpaintballler]

probly the etek

[4pples]

Get an Etek, tried tested and true, and a far more accurate shot...better barrel out of box.... the mini does not compair to an Ego, a mini is good if you cant afford an Ego

[IllinoisFan37]

i've heard the etek 2 isnt really worth the extra money from the etek 1 so i'd compare the two and consider getting 1 and buying ups

[KEGmiester]

What is best with a mini, a high or low pressure tank?

[lawl123abcxcsc]

low pressure

[invertrecon]

low

[Sam0777]

Dow 33 is shocker lube DOw33 is SLEEK

[JordanTheBassmasta]

Dow 33 sucks, get some Lurker or HaterSauce V2

[IllinoisFan37]

i have an ion, and therefore smart parts shocker grease-is this lube ok to use/recommended for the mini?

[killersquid4]

Nope, bad idea

[good3ye]

u should refilm this with better lighting.

[KMAYER1221]

Agreed.

[projectRAZR]

very easy to maintain just follow this vid

[JespersenSk8]

is the pmr easier to mantain???

SOMEONE REPLY!

[JordanTheBassmasta]

Mini is way easier bro.

[XxDomExShoTxX]

when he says dow 33 its not a advertisement meaning..its a specific kind of lube (smartparts is classified as dow 33)

[NikolaAU]

It's a lube which comes with the Invert Mini.

[coolstream1]

anyone find it funny how paintball players have such brand loyalty to everything? including lube...

[nessa6565]

it is pretty funny.

[goldwest57]

u guys dont understand that the guy on the vid is one of the cheif designers of the mini

HE WORKS FOR INVERT!!!!!!!

[aussieriot69]

and

[goldwest57]

so he better have brand loyalty

pay attention dude.

[killersquid4]

Ever bought a mini? Other lubes mess them up. DOW 33 is auctally reccomended in teh manual...

[coolstream1]

yes, dow 33 is recommended... i own a mini, and i also know how over priced it is!

go to your hardware store, buy a similar lube for 1/8th the price for 3x as much :)

personally, i use KY... it warms my gun!

[azminisk8r]

use lurkerlube from lurkerlubedotcom it increases the regularity down to +- 1fps

[azminisk8r]

srry lurkerpaintballdotcom

[michaelegden]

i have smart parts sleek grease and its dow 33. can i still use that on parts in a tippmann or just oil.

[1013441]

i want that gun mat

[pilotman800]

Wow this video is really helpful. I learned how to clean my mini from this!

[Trollofnarnia]

does the mini come lubed brand new or should you have to do it yurself before you play?

[pb4evr]

not sure lol

[warhawkhalo101]

Yes - the little yellow case has Dow 33 on it.

[xnbp3x]

thanks for this vid. it helped me so much =)

[jaysalva]

is that little kit it comes with have dow 33?

[Lajterman23]

do u have to use dow 33

[JordanTheBassmasta]

Nope, Lurker and Hatersauce V2 are much better.

[Mxshadower]

hey Pepsi4all, they say the gun is not a copy of any other gun on the market... why don't you think on that

[Traser13]

Dow 33 i would have though.

[neophyte1688]

simple but what kind of grease do you use?

[IcedZ]

"Re-lube with Dow33" - Listen to the video.

[pepsi4all]

They copy how automag works... check how the air goes in and it is controlled. See how the valve has a spring, exactly how automag is.

[netsniper00]

wth are u guys talking about? its a paintball marker.

Does the gun come with lube and all the parts u need for maintenance?

[mrben0000]

this shoots the bullets you use in a 22

:nododgy:

[snoboarder8232]

A FASOR? No...

[firearms2k]

wow, this work's like a phazer or whatever you call'em right?