the screws for the bottom of the engine one of mine is free when youre trying to unscrew it is not opening what could I do the tread has been eaten up if you know what I mean? dont want to drill it out becuase it can damage the chassis or something is their another way I am thinking of using a file then using a plier dont want to hammer or tap a screwdriver into the screw and i cant use a saw to make it so a flat screwdriver can open the screw
@2pacrocks13 Alright I'm not totally sure what to tell you, I can tell you though to take it to your local shop if you have one, other than that there are just too many things that could affect that. I recommend squirrelod's videos, try searching around his channel.
@2pacrocks13 Well there are several reasons why it could not be starting.. what setup are you using on it? Like are you using the EZ start or pull start or what?
@2pacrocks13 Well, first off, why would you drive it through mud? haha. Secondly, I'm not really sure what to do, I mean, there are so many things that could be wrong if you think about it. The first thing that comes to my head is clean all of the mud off of the engine, the radio box, etc. Giver her a good cleaning. Then replace your batteries and whatnot, and then try to see if it turn on and responds to your transmitter, if it doesnt then your electronics are probably fried... Keep trying.
@planb3694 You're right! I never did make a re-installation video. I will go ahead and make that tomorrow morning and get it uploaded asap. Thanks for your interest!
@gpix13 oh and how much did it cost to convert your ez start to a pull start ?? oh and my ez start motor burnt out but i jus ordered a new one and its coming in in about 4 days,should i use that since i already bought ??. But the thing is that i want a pull start but i only have 60 dollors and i want to get rpm arms and stuff, what should i do??
@planb3694 I bought the pull start from tower hobbies for about $18. I will tell you this, go ahead and use the ez start since you already bought that. If the motor burns out again relatively quickly, or if you have another significant issue with it, buy the pull start assembly. It can be a pain, but a lot less hassle with charging battery for wand, etc.
the screws for the bottom of the engine one of mine is free when youre trying to unscrew it is not opening what could I do the tread has been eaten up if you know what I mean? dont want to drill it out becuase it can damage the chassis or something is their another way I am thinking of using a file then using a plier dont want to hammer or tap a screwdriver into the screw and i cant use a saw to make it so a flat screwdriver can open the screw
shivt91 4 weeks ago
how did you take out the arm
Freakfuzions 1 month ago
Nice
SUPERJJMJ 1 month ago
nice video
jose11221j 3 months ago
Great job! It's a pretty easy job, but it gives newbies the confidence to do it themselves instead of taking it to the hobby shop. Owner pride FTW!
munaenterprises 4 months ago
if your car dont start check glow plug and check if fuel is getting in your engine
TheSaltysack 5 months ago
@2pacrocks13 the mud got into your carburettor
bobcheese427 6 months ago in playlist More videos from gpix13
@2pacrocks13 Alright I'm not totally sure what to tell you, I can tell you though to take it to your local shop if you have one, other than that there are just too many things that could affect that. I recommend squirrelod's videos, try searching around his channel.
gpix13 10 months ago
@2pacrocks13 Well there are several reasons why it could not be starting.. what setup are you using on it? Like are you using the EZ start or pull start or what?
gpix13 11 months ago
@2pacrocks13 Well, first off, why would you drive it through mud? haha. Secondly, I'm not really sure what to do, I mean, there are so many things that could be wrong if you think about it. The first thing that comes to my head is clean all of the mud off of the engine, the radio box, etc. Giver her a good cleaning. Then replace your batteries and whatnot, and then try to see if it turn on and responds to your transmitter, if it doesnt then your electronics are probably fried... Keep trying.
gpix13 1 year ago
Hey man you never made another video... plez make one putting it back in
planb3694 1 year ago
@planb3694 You're right! I never did make a re-installation video. I will go ahead and make that tomorrow morning and get it uploaded asap. Thanks for your interest!
gpix13 1 year ago
@gpix13 oh and how much did it cost to convert your ez start to a pull start ?? oh and my ez start motor burnt out but i jus ordered a new one and its coming in in about 4 days,should i use that since i already bought ??. But the thing is that i want a pull start but i only have 60 dollors and i want to get rpm arms and stuff, what should i do??
planb3694 1 year ago
@planb3694 I bought the pull start from tower hobbies for about $18. I will tell you this, go ahead and use the ez start since you already bought that. If the motor burns out again relatively quickly, or if you have another significant issue with it, buy the pull start assembly. It can be a pain, but a lot less hassle with charging battery for wand, etc.
gpix13 1 year ago
@gpix13 and dont you need to buy a glow plug ignitior ??? and what do you mean by the pull start can be a pain ??
planb3694 1 year ago
@planb3694 Yes you would need a glow plug ignitor as well. If you dont have your engine tuned correctly it can take a little bit to get it started.
gpix13 1 year ago