30a heavy duty pwm demonstration

[RzBusterCB87]

@delvis11 have you tried any high frequencies on the generator while restricting the current?

14,000 Hz @ 800 mA @ 26 Volts, DC, then try AC, suposedly this is what Meyers had...

[RzBusterCB87]

What about a plain old potentiometer...?

one that can withstand like 60 amps.

Then just hook it up to the cars 12 volt system...?

are you using an AC freq? or just pulsed DC?

For the heat, I can just use a heat sync & fan with a circulation pump...?

[delvis11]

@RzBusterCB87 I haven't seen a plain pot that will handle to many amps.

This is DC pulsed.

[RamosCasey9509]

BEST PRICE amzn.to\zL56AK

Customer Reviews:

I was looking for a heavy duty camera kit for my F-450 plow\sander and was pleased to have chosen the Rosco STSK5665 system. All components are over built with attention to detail. I liked the heavy gauge harnessing and brackets, twist lock connectors, a cast body camera with audio, quick delivery, and a clear installation manual. Now ...

For more details please copy the Amazon link below in your browser:

amzn.to\zL56AK

[ebayisajoke]

Promote your kits on my site's main page, please hit me up $15 a month, we can link directly to your ebay store or website!

[whackitov]

nice video, i like your website too....not many offer a lifetime warranty, nor even offer a rebate for feedback, either positive or negative.....for me that is reassurance that no other supplier offers or even comes close too :D

[a2zhandi]

I haven't had a heat issue with my current design. The cells run at about 180* max.

I'm not convinced a pwm is needed.

Also, one cell seems to put out more than this design does while drawing only 4.6A

I am beginning to believe electrolyte is key!

[anilchavands]

dere sir pls give me sarcike diagram of 30 amp heavy duty PWM with frequency control

[johnelectrical]

just been to your website, like the 50 amp pwm but i have questions, went to your contact us link but it just takes you to "about us" what is your email address at your website?

[TheVipcorporation]

nice pwm very good job how many voltage you are using 12 ?  or 24

[delvis11]

@TheVipcorporation I'm using 12v

[delvis11]

@Itsmeeman1 I don't buy from them but yes it is the same board. I buy from a wholesaler. The markup is called capitalism....

[itsmeasis]

When you increased the frequency in the video, did the current decrease from 30A by any chance? Im trying to work out if its more or less efficient to run at a higher frequency. :) Im building a similar circuit to control an electric motor in an EV.

[lumberdoktor]

Your website is nowhere to be found

[delvis11]

@lumberdoktor I assure you it is up and running. Did you type something in wrong? Just click the link.

[gabrieltgh]

@delvis11 What is the advantege of having PWM instead DC voltage?

[vladsaudi]

hi where did u get the pwm ? where can i get one ? email me thank you surinovvladimir@yahoo.com

[delvis11]

@vladsaudi yes go to my website and it's in the HHO electronics section.

[vladsaudi]

hi where did u get the pwm ? where can i get one ? email me thank you surinovvladimir@yahoo.com

[xungari]

осталось прикурить

[novachevyguy]

the free plans link on your site dosen't work man

[delvis11]

@novachevyguy I just checked it is working fine.

[vid009]

Hi. What's the amp meter make and model and where did you purchased it? . . . thanks



[delvis11]

@vid009 I dodnt remember the model but I got it on ebay. Do a search for digital meter.

[liOVERLOADil]

The electrode on the right is loose so we can hear the duty cycle -- OK. But doesn't that also create an electrical spark just inches from hydrogen gas?! Maybe I'm being too cautions, but I would say that's just asking for trouble.

[luichisoft]

This device has problem of temperature.

[liOVERLOADil]

@luichisoft PWMs often come with cooling fans.

[vox1philippines]

its so nice... pls watch my improvise CAR signal flaser as my PWM, pls comment for improvment... thank you...

[chipalike]

what electrolight did you put in the water

[delvis11]

In this video i used KOH