Looking at this have you tried Kynar wire and a wire wrapping tool? Using laquer coated wire must be very fiddly.Kynar wire and the wire wrapping tool (like a small screwdriver) can wrap wire around pins of LEDS,Chips etc making a reliable connection,also the wire is very thin and comes in different colours.It's possible to wire up a whole circuit using no solder.Wire wrapping used to be used in telephone exchanges etc.Wire and the tool are easy to get,Radioshack stocks them,just an idea!!
Hello, thanks for your inquiry: leds have a button that change pattern at each press (in a loop cycle). I do not sell this car, as otherwise, it would be too expensive (counting material and time spent on it).
Hi, Sorry I reply only now. For lights, I used led SMD 1206 series: blue, red, white and yellow. Then I used a programmable chip (Arduino), coated wires, and a push button. Programmed the chip to change sequence at every press of the button. Leds are so small that I could place under the lights cover of the car. To keep lighs in place, I used normal glue. I came out with Lamborghini, as is nice and others 1:18 were not so easy for this kind of modification. Hope it helps you
How to pleasE!!!!
IlhamQusyairie 1 day ago
Best 1:18 Die Cast car ever seen.
2011TOMCAT 6 days ago
Looking at this have you tried Kynar wire and a wire wrapping tool? Using laquer coated wire must be very fiddly.Kynar wire and the wire wrapping tool (like a small screwdriver) can wrap wire around pins of LEDS,Chips etc making a reliable connection,also the wire is very thin and comes in different colours.It's possible to wire up a whole circuit using no solder.Wire wrapping used to be used in telephone exchanges etc.Wire and the tool are easy to get,Radioshack stocks them,just an idea!!
silver760 1 month ago
I DON'T GIVE A FUCK!!!!!!!!!! ;O
RastaAntPoland 1 month ago
This is great but I'd better buy two of the same kind.... The other one is for this experimental act and the other one is for valuable collection. ;)
SLYx207z 2 months ago
youtube.com/watch?v=nntWREU_y60&feature=g-upl&context=G2097135AUAAAAAAABAA
apoveda 2 months ago
how much would it cost to just do tail light (red) / headlight (White)?
DaFallenOne1 2 months ago
can you write the material you used
12345678201814 4 months ago
your are genie !
MAXXOZIC 5 months ago
this should be the next bat mobile thumbs up if you agree
TheBran1262 8 months ago
Vivle Arduino Board!!
MrWaryJot 10 months ago
wow man whats the name of music?
guilhermesabao 1 year ago
Hello
For how many dollars or € would you sell this car ?
And leds work alone or the an interruptor of command ?
Thank you
carsinmyheart 1 year ago
@carsinmyheart
Hello, thanks for your inquiry: leds have a button that change pattern at each press (in a loop cycle). I do not sell this car, as otherwise, it would be too expensive (counting material and time spent on it).
Hope you like this creation.
thx and Happy New 2011!
rav4fun 1 year ago
How much was this car in general?
ShinFuYux 1 year ago
@ShinFuYux
I got the car for about 25$ (discounted price), made from BBurago company
rav4fun 1 year ago
cool man
D7homey 1 year ago
can i send you mine so you can make headlights, rear lights work
CoolStuffReviews 1 year ago
@CoolStuffReviews
He heee... will be expensive to do it: all materials and time!!! It has been a long job (just bcs wanted to do nicely).
rav4fun 1 year ago
where do you buy the light kits and if possible could you show how to put it in
HolyShift27 1 year ago
@HolyShift27
Hi, Sorry I reply only now. For lights, I used led SMD 1206 series: blue, red, white and yellow. Then I used a programmable chip (Arduino), coated wires, and a push button. Programmed the chip to change sequence at every press of the button. Leds are so small that I could place under the lights cover of the car. To keep lighs in place, I used normal glue. I came out with Lamborghini, as is nice and others 1:18 were not so easy for this kind of modification. Hope it helps you
rav4fun 1 year ago