Nice video! U might want to swing the coil a little slower overlapping about 25% of the last swing , that way you cover more ground and miss less stuff :) .. Oh and make sure the coil stays about 1 to 2 inches of the ground ..
What Ricardo and Twist said, plus, you have to wrap the cable, just like an electric magnet the detector will gather strength with every loop around the shaft.
As mentioned, you are swinging that machine very ineffectively, and that coil is small, so it's important you a)Have that coil no more than an inch above the ground and b) That you overlap every swing by 1/2 the length of that coil. You would be better off with a machine that has at least a 8" coil. That looks like a Bounty Hunter Jr? You've got alot of area there to cover and it's going to take time. For coins, and area like that can be worked for months, even years. Good luck.
a) You are swinging WAY too fast and wide. You are probably only effectively covering about 10% of the area you are walking.
b) I think your coil is upside down.
Try slowing down and also, keep the coil as close to the ground as possible. If your sensitivity is set too low, you may pass right over the keys without a signal, seeing that your coil is set too high.
ELLE VA PAS TROUVER GRAND CHOSE LA PAUVRE AVEC UN TEL EQUIPEMENT ET VU LE MAUVAIS BALAYAGE
krisprols55 1 year ago
Nice video! U might want to swing the coil a little slower overlapping about 25% of the last swing , that way you cover more ground and miss less stuff :) .. Oh and make sure the coil stays about 1 to 2 inches of the ground ..
texasmetaldetector 1 year ago
the sensitivity is set to high all so fix that coil and cable .... the coil is backwards....swing slower and take your time.... good luck
iqsmarter 2 years ago
Hope you found em!
ryannlag 2 years ago
What Ricardo and Twist said, plus, you have to wrap the cable, just like an electric magnet the detector will gather strength with every loop around the shaft.
Cujucuyo 4 years ago
As mentioned, you are swinging that machine very ineffectively, and that coil is small, so it's important you a)Have that coil no more than an inch above the ground and b) That you overlap every swing by 1/2 the length of that coil. You would be better off with a machine that has at least a 8" coil. That looks like a Bounty Hunter Jr? You've got alot of area there to cover and it's going to take time. For coins, and area like that can be worked for months, even years. Good luck.
RicardoNY1 4 years ago
A few things:
a) You are swinging WAY too fast and wide. You are probably only effectively covering about 10% of the area you are walking.
b) I think your coil is upside down.
Try slowing down and also, keep the coil as close to the ground as possible. If your sensitivity is set too low, you may pass right over the keys without a signal, seeing that your coil is set too high.
Good luck.
Twistidd 4 years ago
This happened yesterday, January 30, 2008
SuperVillainStephani 4 years ago
O my when did this happen????
and why have i not heard about this??
Bailz23 4 years ago