Hello i wanted to see if you can help me i have a 1995honda accord i left it sitting for a while my battery went bad i bought a new battery but now nothing turns on no lights it doesnt start the only things that work are my brake lights do you have a clue what can it be thanks
I have a 2001 Honda Accord EX V6 this fixed my problem... Although in the video he said not to leave the paper clip I didn't want to cut anything so I got a rubber rapped paper clip cut the rubber off at each end and placed it in the slots
ok look man i know your probably really busy or something but i really need to know its my only car and i need it to go to work at night and i cant see the speed im driving at in the highway. i have a 94 honda accord and i did what this video said but it seems that the cables are diffrent colors and it didnt work i also changed the light bulbs and i tryed the fueses and the switch evrything i justwanted to see what the cables im suppose to connect on this honda are?
This is ghetto as hell, definitely not the way Honda intended it to be. Nice tip, but unless you want to deal with serious electrical issues down the road I would do it the right way the first time.
this just happened 2 me yest cuz i install a new radio and according 2 alot of forums i connected the illimunation wire in da wrong one now im without ligths :(
Pretty cool tip. Do you know how to replace the "D4" bulb in the dash on a 2000 Accord. When I put the car in drive it does not illuminate. Reverse, Park, 1, 2, D3, all work. Just can't get the D4 working. Do they have bulbs? Thanks for any help.
What kind of wire did you use?
ihavebigmuscles1 5 days ago
Hello i wanted to see if you can help me i have a 1995honda accord i left it sitting for a while my battery went bad i bought a new battery but now nothing turns on no lights it doesnt start the only things that work are my brake lights do you have a clue what can it be thanks
0322manny 3 weeks ago
reallly helpful thanks a lot....
umri1 3 weeks ago
men that dont work on honda accord 99 ,wat could be the problem
TEQU1LLO 4 weeks ago
i tryed this and it almost melted my plug it got the paperclip so hot it melted to my finger
antsmonte 1 month ago
have you seen any honda odyessys with this problem? The gauge cluster sometimes works it flickers on and off.
monstermjcivic 1 month ago
I have a 2001 Honda Accord EX V6 this fixed my problem... Although in the video he said not to leave the paper clip I didn't want to cut anything so I got a rubber rapped paper clip cut the rubber off at each end and placed it in the slots
blj5 1 month ago
ok look man i know your probably really busy or something but i really need to know its my only car and i need it to go to work at night and i cant see the speed im driving at in the highway. i have a 94 honda accord and i did what this video said but it seems that the cables are diffrent colors and it didnt work i also changed the light bulbs and i tryed the fueses and the switch evrything i justwanted to see what the cables im suppose to connect on this honda are?
abram1405 2 months ago
hello I have 96 Acura 3.5 with the same problem it seeing the same end there is power at the same cable do you can help me please.
felipevinalay 3 months ago
WIll this work on a civic instead?
killamanjaro306 3 months ago
i have a 99 accord i change all the balls thinking the burn out , but wat u said is no working i put the red . and white /red dont do nothing
TEQU1LLO 3 months ago
hey nice video i did try that and it didnt work ?? i dunno wat to do can u help me ??
TEQU1LLO 3 months ago
Man im going to do it right now.....thank you so much
djp252009 3 months ago
Dude thanks. It really was bothering me not knowing what was wrong. Thanks again
Osodaddy1 4 months ago
well fixed mine!!! YOU ROCK!!!!!!
kornomaniak 5 months ago
This is ghetto as hell, definitely not the way Honda intended it to be. Nice tip, but unless you want to deal with serious electrical issues down the road I would do it the right way the first time.
russianred00 5 months ago
what about a 98 accord ? is the same generation
xMarkuzx 5 months ago
I have a 98 civic. what color wires do i put together to by pass this problem.?
VirgilMr1 5 months ago
btw for how much time will this work for will it mess up any other component in my car ?
760tone 6 months ago
@760tone you bypass the dim function. All other functions will work and other components will not be affected.
Duffett413 4 months ago
this just happened 2 me yest cuz i install a new radio and according 2 alot of forums i connected the illimunation wire in da wrong one now im without ligths :(
760tone 6 months ago
how long will this work for?
joshuajfinan 7 months ago
I did this a couple of months back and it worked now it doesnt...now my tail light and dashlight both dont turn on..please help
duran58 9 months ago
do you think it will affect the electric components of the vehicle?
vigorstyle916chino 9 months ago
thanks man,it worked for me..
pepes4392 9 months ago
thanks good tip i changed multiplex control(driver side) only
but accord 2001 has two multiplex control(pass side) i have to change pass side
too? please help me !!
manlee5319 10 months ago
good tip man thanks for that
ZRick23 10 months ago
thank you man. Just fix this problem. You save me this money man
blackotheblack 10 months ago
do u kno how to fix the lights where u change gears next to the driver where the Park and drive are at?
duran58 11 months ago
Thanks!!! i fix my accord today thanks to this video...thanksss..... i saved more than 100 dollars...
duran58 11 months ago
Pretty cool tip. Do you know how to replace the "D4" bulb in the dash on a 2000 Accord. When I put the car in drive it does not illuminate. Reverse, Park, 1, 2, D3, all work. Just can't get the D4 working. Do they have bulbs? Thanks for any help.
madcaps1 11 months ago
nice thanks
sabonb2 11 months ago