Added: 3 years ago
From: neo3nfsmw
Views: 75,406
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (463)

Sign In or Sign Up now to post a comment!
  • Truck looks killer!... Lots of money there, and a lot of haters here. I love it... My only suggestion would be a Picco .28, I'm sure that 3.3 is sluggish with all that aluminum. Other than that.... The song sucked ass!...lol.. But truck looks gr8!

  • practical? no....looks wicked?,fuck yes!

  • sick truck but the dual pipe is no good for any motors they do not provide enough back pressure and shortens the motors life drastically. also the engine will over heat very quickly other then that this truck is awsome great job man sick truck.

  • this is his show revo. he has another one that he has just for driving so he does not have to replace the costley aluminum parts.

  • friend where you bought these aluminum stuff? it was a site of online shopping gives me please ... thank you

  • You have a sick car man! Definitely the best revo that I have ever seen. Keep posting videos dude, and please watch my videos. Thanks

  • yet stock motor

  • At chumba11111 u r right. U guys r retarded if u get a nitro rustler and bash it. Plus u r jealous because his car would crush yours.

  • i wouldnt have got aluminum it bends to easily, i would get that hard plastic

  • awesome send links on parts suppliers

  • Nice job buddy! Fuck all the jealous haters on here. People make me sick, they see something nice that isnt theirs and they start bashing it. Everyone knows that is one wicked looking truck. The guy built it for show not bashing. Have any of you fucking morons ever heard of a show car??? You guys are all just used to riding around in your rusty Ford Tempos lol. Keep up the good work buddy!

  • Nice looking truck. All u need to do now is, take of the alloy A arms. And replace them with RPM plastic A arms. RPM 80225 Front Left, RPM 80215, Front Right. Make sure u get the RPM 80565 True Track Rear A-Arm Conversion. And swap the rear bumper for a, Adjustable Wing Mount Kit 5411. That should allow you to fit the, Traxxas Sway Bar Kit TRA5498. Total cost is $100 The truck will still be very heavy, but at least u will now be able to drive it as much as u like!
  • wow! this cost a lot of money!

  • me and my dad have same but the staring

  • BLING BLING AND LIL' GASOLINE, HELL YEAH

  • how much did that cost?

  • @ben1000bhp car only rtr around 750 800 euro's this upgraded parts uhm think 400 more

  • @ben1000bhp car only rtr around 750 800 euro's this upgraded parts uhm think 400 more

    and this is of an rtr electric! 3.3 i dont know but u could say MUTCH

  • wow I can appreciate what you have done.good job.That things worth more than my mustang.lol

  • good luck puting a body on there

  • UGH not that ghey RD Logics dual pipe, I hate those..

  • cool :-)

  • hi, a all alloy rc car its not fun at all, im selling my savage xl because (bought second hand all upgraded cheap) i just cant bash it, flips over easy, bends and scratches, while my most plastic schumacher havoc, its a tank, wont brake at all even flying around!

  • that car run 45 now it runs like 3o with all those stuff

  • were can i get one of those air cleaners?

  • mug

  • how much money do you think you got in to this?

  • wow, that's ridiculous. almost makes me regret buying my new 335ix. ha ha. it is beautiful though, but I would be embarrassed to have it out where people could see it, unless you have a basement toy/rec/sport room. I can't say I have ever met anyone who has coordinated their decor to include an rc as a center piece, or have placed on their stone mantle. I do have a basement room, but I don't show it off.

  • Moby зачёт.

  • @vadimka080 dont know what the second word is but I know your talking about moby!

  • @Tigerbarb202 Maybe Moby Dick? haha, I don't know.

  • *YAWN*

    So you blew a year's pocket money on a bunch of crappy Integy parts.

    Yay for you.

  • @FasterLouder your a fuck bag

  • @FasterLouder not evryone makes as little money as you. rcing is the shit dont hate.im assuming you cant afford this?

  • all show no go.

  • Now its time for some bashing!!!!

  • too much chrome, add sum purple.

  • may look nice.. but way too impractical.. all that alum parts added weight and now that revo probably rides like shit.

  • you just wasted money for that aluminum it can have some scratches when our bash it dickhole!

  • SHELF QUEEN!!!!!

  • good work my friend!

  • whats the make and model of the air filters

  • do the dual exhaust on the back work for every nitro rc buggy or trcuk

  • cant wait when u hit a mailbox in 2nd insted of jus takin yr tire of its ganna rip every thing apart

  • 2 filters wtf

  • song sucks cock

  • ?? wats the 2 fuel for.. pointless......

    2 air filters?? pointless lol wow fail

  • dude that is sweat

  • where did you get the air filters

  • @xcvmelikexcv auto zone

  • @FrankWithAnE25 whats the brand and size

  • @FrankWithAnE25 whats the brand and size

    and how much

  • How much is this one worth?

  • looks hot

  • why does he have two air filters

  • where did u buyed all that?

  • where did u buyed all that???????????????

  • where did u buyed all that??????????????????????

  • how about you step into the league and buy aluminium drive shafts. Then you have a completely metal, undrivable revo. You can tell from the inside of the exhaust that it has never been run, atleast with that exhaust.

  • i bet it weighs less than a pound.

  • @Commandoskater3 dude aluminum is heavy...

  • @KumaHwevoproduction Not really, a stock plastic revo a arm is about an ounce, and alloy a arm for a revo, Made by traxxas, is about 1.2 ounces..

  • You have almost all of the same parts as I have on my revo, the only thing different is that my servo/radio box covers are blue anodized and I don't have the gas tank guard or paper filters. btw how is the RD logics dual stinger exhaust? I was thinking of getting one but everyone told me that they rob your truck of power.

  • wats the second air filter for?

  • that has to be heavy I know all the aluminum and steel I have on mine, I have changed engines twice! But looks damn good!

  • i like the fuel line *holders* on the side thats really nice!

  • way too much aluminum for driving. But god damn it looks sexy.

  • stuff in it us just gonna bend

  • Shelf Queen? sik none the less.

  • money droped?

  • looks good but too much aluminium can sometimes actually be really bad

  • hey how u clean those type of air filters

  • fuckin beast lad

  • nice like it just new engine

  • Gotta dress to impress...

  • how much money do you have in that

  • SHINY!

  • Looks like a robot i dont like

  • dude thats some nice shit how much it cost you?

  • why?

  • I hope you don't run it

    Cause flip in road it's broke

  • I would have removed the anodising from the main chassis and polished that too

  • good way to spend 2k+.. money well spent?

  • You're not planning on driving this... right? ;-)

  • look awesome but i would be scared to put a scratch in it

  • i have the same pipe haha

  • Looking to sell?

  • damn this a major upgrade..........

  • WHERE do u get those air filters from?

  • how much did that cost to do.

    this is the sickest looking rc i have ever seen.

  • how much did that cost to do.

    

  • Should have gotten the Integy titanium push rods and turnbuckles

  • are those two airfilters? and were do you buy them

  • sick, hope u got one just for driving though

  • you should wear it around your neck, like a funky fresh medallion...

  • really nice truck

  • it's very beautiful

  • it's very beutiful

  • Wow, bet it looks bad ass sittin on that shelf!

  • Nice truck.......now go get it dirty!!

  • too much shinny shit for me, id rather have runin hella good but not worried to crash.

    how heavy is that now?

  • too much shinny shit for me, id rather have runin hella good but not worried to crash.

  • that is one bad ass machine if it had new cv's it would be even better

  • we love bling in rc!!

  • why put a filter on the pressure tube-pointless anyways i got mine today and run it in brilliantly out of the box i got 60mph i dont know why there only sudpose to do 45? great car dont use it just look at it

  • The front Integy body mount is the wrong one. lol. The one you have on is for the older revo. The rocker arms cant move fully

  • it looks like a plane with no wings

  • please tell me that you didn't buy the truck and then do all of that to it.

  • why does it have two air filters

  • y does it have two air filters

  • @kno3nitro5cole more air intake=more power atleast in real cars it does. idk about the smaller engines

  • how much it it to do that?!

  • nice show rig

  • first crash you need about 250$.

  • I can assure you that is more than $1000.00 sitting there

  • would have to agree with Scherb like y man

  • Much heavier than when you first got it. You don't need all of that in aluminum.

  • what is tha silver at the 0:10 you have 2 of them...were do you use that???

  • beautiful piece of machinery, but I would like to see it put to use.. why have a beautiful child, if you keep it locked up indoors, never to see the light of day?

  • Show us a video of it running...

  • I bet you don't drive it..Do you?

  • Somebody has some cashhh, ey?

    

  • WELL THERE GOES A THOUSAND BUCKS.

  • Shelf queen.

  • no wonder that guy says its useles its got no wheels and it is so heavy its like meals on wheels

  • no wonder that guy says its useles its got no wheels and it is so heavy its like meals on wheels

  • no wonder scherb says its useles its got no wheels

  • id be poor rather than not knowing what to waste my money on

  • Id rather be poor rather than not knowing what towaste my money on

  • Id rather be poor rather than not knowing what to waste my money on

  • id rather be poor rather than not knowing what to waste my money on

  • id rather be poor rather than not knowing what to waste my money on

  • absolutly beautiful !!!!!! check out mine . its a t maxx. tons of coin.

  • is that a tuned pipe? were did you get the pipe? and thats stupid. spray some windex on it and never put wheels on it.

  • i mean its looks ausome but aluminum is falshy but for me im constantly bending it i learned the hard way that rpm is the way to go and if u break anything rpm they will give u a new 1 for free

  • drop it, it wont break WAIT its aluminum...

  • cost?

  • I'd give you props but you're rocking a blue chassis. Couldn't splurge on a carbon fiber vantage chassis or heck, $5.00 can of easy off to strip the blue?

  • Is that a fuel filter on the exhaust line?

  • if i was spending all that money on a revo at least i would take the ezstart out

  • man i have a $1400 jato3.3 all carbonfiber its impossable to drive thou its to light it flips shifting to 2 and it is 2 fast for my driving area

  • how much did you pay ??

  • nice

  • Dude, this is awesome. For everyone that calls it a useless shelf queen, they're just jealous. Of course it's not meant for racing, you know that and everyone that knows anything about RC knows that. Just like real cars, some RC modelers prefer to race and some like to accessorize and hop-up their rides.

  • piece of shit, seriously not even kidding

  • Plannin' on doin' this m, myself, where'd you buy the upgrades?

  • real nice truck looks tits what body do u run?

    but its most likely slow all that added weight

    and things are going to bend vs flex and break

    but nice truck looks good would like to see some top speed runs and some jumping and flips

  • wow thats gayer and more pointless and 2 fags making out in a tree made of 5000 aluminum dildos welded together...

  • wow nice truck! how much did all that cost?

  • how much did this cost?

  • how much did that cost?

  • gr8 (Y)

  • fail fail fail fail fail. looks great but don't run it. 

  • does it work?

  • bravo continue 

  • you forgot the big block kit

  • steel #FTW

  • fuuuuck meeee... you shit the fucking up the lovely revo ;/

  • does it even move anymore lmfao o.o. looks nice tho good job man

  • People talk shit because they cant afford to do something like this!

  • What aluminum part good for? Jump to the shelf!!!

  • One big crash and he'd have to rebuild the whole god damn car...

  • y 2 air filters and were did you get those

  • Not to be a hater-but your gonna need a lil more than that 3.3 to power that beast.... for me at least...I'd be runnin a modded 28 pro motor...Nice lookin car though!

  • i like the exhaust that is sweet what did all that cost

  • haha good car

  • more money than brains

  • not good

  • not good

  • not good

  • not good

  • not good

  • its not good to much aluminum its like a robot

  • its not good to much aluminum its like a robot

  • its not good to much aluminum its like a robot

  • guys who knows RC know that K/N filter suck HARD on RC truck , because it doesn't catch dust....

  • guys who knows RC know that K/N filter suck HARD on RC truck , because it doesn't catch dust....

  • Magnificant job. Congratulations...

  • now because of you people are gonna host rc car shows!! lolol sick looking truck man!

  • This truck will never see dirt again. Why do you need two filters?

  • Integy is cheep anyway. 50% at best. Still missing the tranny case, bulkheads, electronics boxes, drive shafts and rims. You filter the exhaust??? rofl FAIL

  • Integy is cheep anyway. 50% at best.  Still missing the tranny case, bulkheads, electronics boxes, drive shafts and rims. You filter the exhaust??? rofl FAIL

  • You should see mine, I'm doing the same thing. I have a few uploads if you would like to see how I'm going so far.

  • dang dude, that must have ben alotttt of money

  • waste of money !!!!!!!!!!!!!!!!!!

  • waste of money !!!!!!!!!!!!!!!!!!