SCOOT 4ROTOR

[MrFixitcomputer]

What body kit is that?

[fourtwentypr0of]

@MrFixitcomputer Fortune Veilside bod kit just like the one in tokyo drift movie

[DEVILZWANGAN74]

ROTARY POWER!!!!! 20B FOREVER!!!!! <3

[TheFamousFury]

OMG!!!!!!!

[7Rotorman]

V8...aaahhhh!!! F1 CAR.......V8

[Mikeado66]

Reminds me of when I saw a 787B at the Goodwood FOS this year. SUCH EPIC NOISE.

[jodark]

Mother of god.

[RaynaldNSM]

It's sounding like a F1 V8 !!

[jaymaster774]

sounds insane!!!!!!

[bo093]

Eat piston for breakfast, eat apex seal daily, take 500ml oil weekly.

Keep warm by redlining it weekly.

That should keep away awful mechanics.

No matter what, Keep loving Rotors.

[kffive]

Yea cams,all five cams, all five.

[supr2nrx]

LMAO @ "CAMS"

[dlinecg]

holey jesus christ



[turbo911kai]

相変わらず　良い音させてますね～。　もう少ししたらモツ行きたいかもです。

[DaedalusZero]

Also, where can i by dis engein? I want my Civic hatch to run 9s.

[DaedalusZero]

Ya bro. Dis is rite after they installed teh lumpy cams for more top end power on the tooj.

[silliuce]

FUCKING LOUD ! but so great  damn im in love !

[Harthorn]

does it have forged pistons? :P

[miek127]

6 people are upset at how much new underware cost.

[kooky216]

i came

[shazeebmw]

now how do you get cams in a RX7 i though it has only 2 or 4 triangle blades

[Patsa2001]

i think i got Tinnitus and a boner both at the same time

[JDM4EJ1]

That Shit Sounds Like 8486286383749800023986 Times Better Than a F1 Car

[DjFreshmatic]

I WANT IT!!!

[maariwarrior]

This is soooo sick!!

[pdpdrummerboi]

If any man says that this car doesn't sound sexy needs to be castrated and thrown off of Mount. Fuji head first.

[Brendon2121]

I want a loop of this thing idling to play 24/7.

[JimmyFox91]

Sound Like F1 xD

[FukU2222]

Does anybody know how much power this thing is making?

[filojosh]

its so fucking unbelievably sexy

i saw one of the scoot rx7's in Shinjuku when i was over in japan for a holiday , nearly jizzed in my pants on the street!!

im moving to japan early next year for a teaching job... hopefully one day i will have a NA rotor in my possession.

[heyedmond]

@filojosh hope you are alright man, be safe japan

[sinosuke12345]

i agree it does so like a 787B but itsa r20b rotor not the r26b but still you cant really tell the differences butdammif iheard thatcomeing downmy street or any punk ass ricer around were i live oh boy they better hold on

[spvensko]

@sinosuke12345 It's a four rotor, so it is a 2.6 liter...

[BlackOpSource]

@spvensko It's a four-rotor engine built out of 12A components, rather than 13B. Displacement comes to 2,292cc by Mazda's calculation methods, but since it's made out of 12A parts, it's called a 24A. The four-rotor R26B found in the 787B race car shares modular dimensions with the 13B, so its displacement comes to a comparatively massive 2,616cc, again using Mazda's numbers.

[Twitchc0rp]

wow thats one loud rotor bet you piss the neighbours off with that godly sound haha

[PACKyourSHITfolks420]

It sounds like the 787B

[se7enHuss]

i want one

[ladangelo202]

wow

[ssonosk]

sounds like a damn F1 car

[vybzcartel1]

Rotary power omg!

[sm324558]

big block sound at idle and f1 car sound at high rpm have to love that sound

[outlawsonic]

WHAT ARE THE NUMBERS!!!!!

[MultiElenor]

beautiful sound (Rx-7)

[foxydj2012]

It doesent take a dump down low, the cams are just that agressive...

[sabberjoch]

@foxydj2012 LOL! Cams on a rotary! you got to be kidding!

[awdwannabe]

@foxydj2012 cams? thats a joke right? fuckin idiot...

[PACKyourSHITfolks420]

@awdwannabe 2012 = moron

[JD0x0]

@foxydj2012 rotarys dont have cams fool.

[DJOZZA]

@foxydj2012 haha cams, dumb fuck

[DukSezQuak]

@zeekdavis11 He must be your grandfather then...?

[zeekdavis11]

@DukSezQuak woah ok ima delete that cuz that makes no sence got damn drunkin antics

[rotarytorque]

@foxydj2012 yea man....those are some aggressive cams bro.......on that ROTARY ENGINE

[newengland72]

@rotarytorque * Rotary engines don't have cams; they have ports.

[rotarytorque]

@newengland72 LOL i know i was trying to poke fun at foxydj2012....i have an RX-7 myself actually....check it out!

[NoFanSLand]

@foxydj2012 hey did you know the pistons were triangle shaped instead of being circle? yeah and the cams are triangle shaped also, so they open 3 times once every cycle. That's why it sounds so agressive on a WANKEL ENGINE!

/S

[alexfd3s]

rx7 wit a M 45 back sweet. 

[TheYukisaito]

787Bのサウンドだね(・∀・)!!

[beamish17792]

fuck all of ye

[DustinLee533]

very aggressive 

[takezojapan]

HOLY SHITTT!!!!!!

[thaboss32]

fuck i had to pause cause i need to change underwear

[winterstellar]

I SO WANT THAT CAR!!! And the righthand-side steering wheel and everything is just perfect in Thailand where I spend more than half the year. I think I'll buy one in Japan and import it to Thailand! The sound alone is enough almost, but they're great cars otherwise too! : )

[Stealthboy990]

wtf is that thing? sounds great though

[DalnamikDesigns]

WOW! THAT SOUNDS LIKE AN F1 CAR!!!! LUKS LIKE A MERC THOUGH.....

[ProtegeTuype]

the tail lights looks like from Mazda Protege .

[madmestesoskillz]

@ProtegeTuype The tail lights are from the Nissan Y34 also known as the Nissan Cedric.

[rotaryperfection]

I'm one of the biggest rotor heads around. The rotary displacement wars needs to stop. Mazda rates the displacement of each cylinders volume per 1 combustion event per housing. That means a 1.3L rotary will MOVE 1.3L of air for every e-shaft rotation. A 1.3L rotary will also MOVE 2.6 liters of air for every two rotations of the e-shaft. That's why in competition it's comparable to a 2.6L piston. The numbers don't lie. A 13b based 4 rotor moves 5.2L of air for every 2 rotations of the e-shaft.

[tlesiak91]

THANK GOD FOR ROTOR!!! thumbs up

[ImM4sterFucker]

stooooooooooooopppp !!!!!!

[NFSPROSTREET95]

from the back he looked as a nascar ;P the sound are very hard "nice job"

[userx100]

sounds like an f1 car

[MrCarmaster1]

take you bull shiyt and shove it up ur azz

[TheLordofShell]

You can see small fragments of the apex seals flying out of the exhaust

[mountainboundwbd]

is it just me or does the back look like an ///AMG back?

[PRAGUErepresent]

@mountainboundwbd RIGHT .... CL klasse

[mountainboundwbd]

@PRAGUErepresent from the bumper up looks like the cl class, shure does

[MrCarmaster1]

thats an infinti

not an rx7

dumb

[MegamanEXEv2]

@MrCarmaster1 No retard, its an RX-7 FD3S with a full body kit.

[Ktmzqw]

@MrCarmaster1 "car master"... loll You suck donkey ass

[DjFreshmatic]

@MrCarmaster1 that's a scoot rx 7, google it

[buhrrito]

damn i didnt even know that this video existed!!

[sof1map]

love that noise!

[Silencestolen]

Rotary engine done right

[pacman599]

Sounds like a F1 car that!

[SVTCO]

holy shit, never heard a car that sounds this good, looks sexy as hell too. would give a testicle for this car.

[winterstellar]

I want to go to Japan and import one of these to Thailand. They drive on the wrong side of the road here too, so it's a perfect Thailand-car for me. I think I'd fire it up at times just to enjoy the fantastic sound.: )

[carlosrawr]

am i the only one thats turned on by this?

[s13silly]

@carlosrawr no

[VRtheTrooper]

so effin SIIIIIIIIIIIIIICK! my 1.3 has nothing on this! i want a 4 rotor damnit

[dnuofntsol]

I still masturbate to this sound daily!!

[DjFreshmatic]

sounds like a fuckin F1 damn

[07speed3guy]

Torque is acceleration. And the only way one of these runs in the 6's is with forced induction. I don't care if the race is downhill there is no way 600hp is capable. Well over 1000hp is needed. Turbos make a ton of torque thats why little engines use them.

[jameswswanson]

@07speed3guy

hp = Torque x rpm / 5252

[TEDDERAMA]

@07speed3guy Yes and no... Torque is what pushes/forces the car through a gear in a given amount of time. If an engine assembly is easier to rev, it will pull through a gear faster. Try this experiment: Take two of the exact same car, equip one with 40 more hp by any means necessary. Now take the second car and lighten the rotational assy with pulleys, a flywheel, and lighter wheels. The two cars will be just as fast as one another, and possibly the lightened one edging out the other...

[07speed3guy]

I am the small engine big power guy. Haven't owned anything but. I would give my left nut to own a car that sounds like this. I just dislike when people have their ideas and are stuck in them. I love power in all its forms.

[07speed3guy]

The rotary makes an amazing amount of power. But it is still just 2.6 liter. So it makes little torque. As they say No replacement for displacement

[schnitzel2k3]

@07speed3guy this engine (the 26B) regardless of being a little low on torque (I think it's something like 428 NM (whatever that is in ft lbs) is like a freight train. This motor is an exception to the displacement rule. At 500hp, each rotor develops 125 hp, versus a V8, where each piston produces 63 hp. Lighter, more powerful / cubic inch = winning combination.

[zebatov]

This isn't a 26b. It's a 24b. And I'm pretty sure it has a little more than 500 horse.

[zebatov]

Again, the engine is 2.4L. And if you search out "rotary power" you'll see 1.2L engines running low to high 6's on the 1/4 mile. So I wouldn't ever put all my money on torque unless I was betting on a tractor pull.

[WZW1982]

@zebatov I know your comment is old but where is there a 12A pulling 6's in the quarter?? Sounds like you made that up considering the world record is like 6.5 ish on a 20b turbo making like 1500 hp. Just sayin

[zebatov]

@WZW1982

I saw it on here a while ago. I didn't make that up. It's a beasty tuned engine. I know of a guy (heard of him on the internet, but my friends know him) from the Vancouver area who has an 890 hp 13b. That was a while ago so it might even be almost 1000hp now. So I don't think a 1.2L engine would have much problem doing about the same.

[07speed3guy]

Not quite. The rotary lags the torque. even if it makes 500hp it is still only 2.6 liter. Which means it doesnt make the torque of a V8. As they say, No replacement for displacement.

[JamalAberle]

well that fact is that a V8 is piston powered, v.s. the wankler still engine. it's just the physics behind both. But the would you think that a littler engine producing more power would be nicer?

[schnitzel2k3]

@07speed3guy Don't get me wrong though, I love displacement, M5's, RS6's, C-GT's, R8's, Gallardo's, Enzo's, Corvettes, Vipers, but I can't help but love the rotary for it's simplicity, versatility, and raw power. What other engine can you modify in so many ways to get so many combinations of power, and usefulness. 13b, 20b, 26b, all made from the same parts....essentially.

[Turbineregulaoter]

4rotor gonna totally shit on v8's, rotor=genius

[wuntyme]

4roter gonna eat v8s hahaa

[krisUSA111]

sounds like F1 car daaaaaaaaaaaaaaaaaaaamn nice

[arbeitemachtfrei]

Yeah but a not a production

[Gramazone]

4 Rotor!!1

[07speed3guy]

The rotary fires three times per rotation. So with 4 rotors it is the equivalent of a 12 cylinder at 16000rpms. And as it turns out, that is amazing

[ghoulunaticzdylan]

16000 rpms?? most rotaries only do 10000rpm

[07speed3guy]

@ghoulunaticzdylan A piston engine fires every other rotation. So a 12 cylinder fires 6 times per rotation. The four rotor fires 12. So at 8000 rpm the rotary sound like a 12 cylinder at 16000

[07speed3guy]

@ghoulunaticzdylan A 4 cycle fires every other rotation. So a 12 cylinder fires 6 times. The 4 rotor fires 12 times and turns 8000rpm. twice as many combustion events as Steve Matchet says.

[zebatov]

Basically what he said is that they sound like they're reving higher than they are. And no, most rotaries redline at 8. With p-port they'll redline at 9-10k rpm.

[C3H8E30]

@07speed3guy - Fail. Rotors fire once every revolution. They turn at 1/3rd crank speed.

[emmetm1]

@C3H8E30 well all 4 stroke petrols, only half the cylinders fire per rev.

[somerandomaussie]

i just completly made a mess of my pants....

[jhauschild]

If I had the money, I would love to put a setup in my Spyder. Power to weight would be off of the wall.

[xan7794]

amazing sound

[SirWilliam86]

@xan7794 And all from a 2.6. Rotary FTW.

[859JDMCTR]

where can u get this motor??

[zebatov]

@859JDMCTR

2 12a's put together. So out of two FB's, essentially.

[turboturtle22]

i want...

[wankeleo]

sembra una formula 1 porca troia che potenza.

[trickd240sx]

I just nutted. OMG touch it, touch it....aaaaa.....dont touch it LoL

[MisterHolaMan]

That's more high pitched than an R6!

[pianoshredder89]

yeah i thought hitting the brakes was a big no no. but love that sound of the engine. amazing car.

[pcthebeaner]

jackass hit the brakes on a dyno..... idiot.... sick ass car though..

[D1stort]

Yeah, I'm sure the guys that dyno the Scoot Motorsports vehicles are complete idiots... Why don't you show them how to do it properly in your well established performance shop.

[sc62391]

They sound so weird, kinda like a f1 car?

[winterstellar]

@sc62391 Yes, it sounds like it's running at a much higher rev than it actually is..that's because a rotary fires on every revolution and this one fires four times every revolution. The ignition/crank is offset exactly 90 degrees between each rotor, so you get an extremely even and high-pitched sound. Like I said, it's like music!: )

[jasonabsence]

A rotary engine fires twice per rotor each revolution.

[winterstellar]

Yes of course. And that makes them sound even more insane, even more high-revving. Thanks for correcting me: )

[zebatov]

@jasonabsence

Except for the 787b which fires 3. Which is a 4 rotor engine itself. This engine (a 4 rotor, obviously) is made up of 2 12a's. Which fire twice, as you said.

[jasonabsence]

How does the 787b's 4 rotor fire 3 times per revolution? Is the eccentric shaft spinning at the same ratio as the rotors?

[zebatov]

@jasonabsence

I'm confused. The first time you said a rotary engine fires twice per rotor per each revolution. That's correct for three turns of the e-shaft and one turn of the rotors in a 13b, regardless of them being offset 90 degrees.

Now you've said "3 times per revolution". That would imply to me you are talking about a 20b.

In the 787b 4 rotor engine, there are 3 spark plugs per housing. Therefore the engine fires 3 times each rotor revo for a total of 12 times per e-shaft revo.

[jasonabsence]

@zebatov

Whoaaa ok I see why you told me that the 787b's engine fires 3 times per revolution.. When I said a rotary engine fires twice per revolution per rotor, I meant to say a power stroke. I did not mean anything in relation to the spark plugs. You are totally right that the 787b's engine has 3 plugs per rotor, while a factory production Mazda rotary has 2 spark plugs per cylinder. To my knowledge, all Mazda rotary engines have 2 power strokes per revolution per rotor.

[gogrampus]

bad shape,great sound

[swingAE86]

MAZDA F1!!!

[07speed3guy]

Ive seen this video at least 10 times and it still makes the hair on my neck stand up

[Klodust]

@07speed3guy  me too haha

[muva2000]

godlike

[winterstellar]

The rear-end has several times more down-force than the original, even with wings/spoilers. Quite brilliant, if you ask me!:)

[teflond0n]

what a monster. pity they ruined the shape of the rx7

[heith85]

they were just trying hard to make the car not look like an fd3s i am not a huge fan of it either. but i like the idea of what they did

[670Represent]

Damn that sounds like they have a damn F1 engine under the hood.

[killbotexe]

@670Represent Revs about the same

[svtrcr]

@670Represent Pretty much.

[arbeitemachtfrei]

rotarycorvette1

If your name happened.

That would be bullshit!!

Corvettes are not worthy enough for a rotary.

[arbeitemachtfrei]

Badass car.

[boostedjunky]

Tail lights look like Y34 Cedric.

[mobeenkhan]

custom or no custom still ugly body kit!!!

[mobeenkhan]

Rear end is Damm ugily, orginal RX is far prettier!!!

[99v6cam]

They made it this way so they wouldn't have to put a huge ugly wing on it. Basically instead of a big over sized wing to keep the rear wheels planted, they used a big over sized diffuser. It's not too bad, kinda makes it look like a Mercedes though. Sounds amazing.

[youngndangerous101]

26b rotary engine quad rotor

[nightryder32]

wow sounds more like an F1 car or something

[scrustle]

That's an RX-7??? What have they done to it?? That kit looks amazing! ..if that's what it is.

[Klodust]

its sorta not an Rx7 at all. its a brand new chassis made by Scoot, and what they have done to it is added more rotors to the engine. if i knew more about rotaries id explain. And as it says in the title it has 4 Rotors

[scrustle]

Oh ok I see. I've never heard of Scoot and I saw RX-7 in the video info so i just assumed. I know roughly how a rotor engine works but if you tried to explain the intricate details I would probably be totally lost. I will have to look up these guys ;)

[xXturbo86Xx]

if you don't know don't post. it's a custom bodykit on an FD3S chassis

[rotarycorvette1]

this car 800 million Hong kong dollars how much is that in us dollars doesnt sound cheap

[thaboss32]

i wish they woulda posted the spec sheet at the end

[shoot17me]

Now I know what the car journo was referring to.

Awesome sound!

[rollemdoobies12]

damn!!! sounds like an f1 car

[youngbleeb]

Reading some of these comments, I love how every asshole who doesnt have a clue about a rotary engine, has never worked on them IS ALWAYS THE GOD DAMNED EXPERT on the subject LOLOL these fucking people

[medoseedo11]

AHHHHHHHHH (Shift) AHHHHHHHHHHHHH (Shift) AHHHHHHHHHHHHHHHHHHHHHHHHH

[wankeleo]

fuck omg!!!! what hp??rotary experience!4 ever

[isthisforreal04]

that thing is insane... probably one of the sickest cars ive ever heard in my life

its a dam f1 motor hahaha