@EmpireLS56KW how is it noisy. i've used one before. and they are not noisy. and once you watch a movie, you can't hear it, and it rattles the shit out of any thing. you need to shut up.
Is it wrong that subwoofer technology gives me a woody. I can actually appreciate the forces being generated by this air moving machine. SCARY if ya think about it too much lol
This is great. The wikipedia article is pretty thorough on the basic concept of this. So, I take it that this whole set up is not portable? So, that room/chamber thing will have to be built and collapsed each time?
@IgorSavtchenko the TRW is meant for a fixed installation with carefully designed baffles. chamber, back pressure area, etc... however, the inventor recently told me that he is working on a portable TRW unit, for large venues such as concerts.
No, it acts sort of like a helicopter blade where it engages levers to change the pitch of the blades. The "fan" spins at a constant speed and with no signal, the blades are straight, and as the bass comes on and a signal goes into the voice coil, it changes the pitch of the blade creating pressure inside the other room/box.
@dannon2010 yes it is a subwoofer. High pressure low freq sound waves are produced by the blade (which spins at a constant speed, around 700Hz if I recall) which changes pitch linearly according to the voltage waveform from the amp output. As simple as that. So the pitch can be positive, zero, and negative. There is a max amplitude pitch of course which should not be approached otherwise distortion increases.
That sounds like an impulse, which is what you get when you have all the frequencies at equal amounts. I think it is possible to broadcast waterfall photographs using this subwoofer at a slow rate using a spectrum analyzer and a microphone that goes really low.
i don't get this shit.. i know it will make a bassy sound but that just sounds like thumping on a hollow wall. can it generate all the notes you would need for a home cinemar system? all you can hear is the motor is it loud at all?
Speaking of square waves, I think a speaker system cannot properly make a square wave thus of the limitations of the systems internal capabilities and the speakers suspension. the damping is just not fast enough. Square waves are harmfull to speakers.
Nice one! BTW, you know those background vocals in your songs, right? Well, my mom loves the song "Bass, I Love You", but the background vocals scare the crud out of my sister, LOL. You should really post some FL Studio tutorials, at least on the methods you use becuase you are a lot better than any other FL Studio users who have posted tutorials here!
The way I make my music is top secret. Cant do tutorials. :) Tell your sister that and angel is who made the song. ;) Salute to you mom. I am glad she liked it. :)
Angel who made the song... I already told her that someone who specializes in making bassy songs made it on his computer. Props for making up techniques so good you're not willing to let anyone know how you do it. Also, thanks for saluting my mom! : )
Bassotronics, your music is what made me actually like bass man, started out with a junky computer sub, now i got like 2 15"s among other things. Really enjoy the sub-bass frequencies in Bass, I love you.
Good thing the size of the sub has nothing to do with performance, I would have figured a white boy would have at least have the smarts to do some research on a topic before they start talking about it.
@31Orcas what the hell. same here. bass is literally every thing. i'm white. i'm like basicly a raver. love techno. have a 2 200 watt subs 2 120 watt subs and 2 tweeters with a bunch more. whos the dumbass who told you "black guys only like bass"? i want to yell at him. lololol
I'm half Mexican and half white, and my Mexican uncle used to have two 15" MTX subs before I was born (I was told), so it's kinda in my genes. But yeah, all races like bass.
The reason you can't hear the base is becouse the actual basesound is cuz it's recorded from the back of the sub... if it would have been recorded at the fron you would ahve heard it... sry for my bad english :P
What a load of rubbish! Damn thing is so noisy! No way would I have that, not if you paid me £10billion! FAIL!
EmpireLS56KW 3 months ago
@EmpireLS56KW how is it noisy. i've used one before. and they are not noisy. and once you watch a movie, you can't hear it, and it rattles the shit out of any thing. you need to shut up.
bait28 1 month ago
Look how getto that is its in his wall
Jetcan1122 4 months ago
@Jetcan1122 Ummm, it's supposed to be. It's built into his wall so it will stay in one spot while producing bass tones.
TheJoshinator1 4 months ago
So basicly this thing works like a 3d r/c helicopter right? Pitch of the blades changes to create the bass?
goingfishing313 5 months ago
But will it blend?
vr4ish 5 months ago
Is it wrong that subwoofer technology gives me a woody. I can actually appreciate the forces being generated by this air moving machine. SCARY if ya think about it too much lol
toyghgh 5 months ago
will it blend?
yes
Only this will be the thing doing the blending.
paintballgundown8 7 months ago
stop kicking it
xXspartan125Xx 9 months ago
it sound like a helicopter from san andreas that refuses to start..lol
perrythekiller 9 months ago
That sounded like you were beating on a trash can, it's cool but a novelty!
theantiredneck 10 months ago
@theantiredneck You have to hear it in person!
OrganNLou 8 months ago
why didn't u open the door?
remyronko 10 months ago
will it go in a car?
LostTheGameXD 1 year ago
This is great. The wikipedia article is pretty thorough on the basic concept of this. So, I take it that this whole set up is not portable? So, that room/chamber thing will have to be built and collapsed each time?
IgorSavtchenko 1 year ago
@IgorSavtchenko the TRW is meant for a fixed installation with carefully designed baffles. chamber, back pressure area, etc... however, the inventor recently told me that he is working on a portable TRW unit, for large venues such as concerts.
tzotzo 1 year ago
@tzotzo That's actually my job, heh heh. Big ol' "boom-tubes" coming soon.
Srfingfreak 9 months ago
No, it acts sort of like a helicopter blade where it engages levers to change the pitch of the blades. The "fan" spins at a constant speed and with no signal, the blades are straight, and as the bass comes on and a signal goes into the voice coil, it changes the pitch of the blade creating pressure inside the other room/box.
hellatyteman13 1 year ago 13
@hellatyteman13 yes, finally somebody gets it!
tzotzo 1 year ago 11
@hellatyteman13 Oh finally I get it now lol thanks
atomdragon4 1 year ago
@hellatyteman13 perfect summary thank you
how do ships go in reverse?
haahah
spaghettiwesternLUVA 4 months ago
I've been searching for leslies and rotary speakers, but I have no idea whats going on here....spinning subwoofer?
dannon2010 1 year ago 3
@dannon2010 yes it is a subwoofer. High pressure low freq sound waves are produced by the blade (which spins at a constant speed, around 700Hz if I recall) which changes pitch linearly according to the voltage waveform from the amp output. As simple as that. So the pitch can be positive, zero, and negative. There is a max amplitude pitch of course which should not be approached otherwise distortion increases.
tzotzo 1 year ago
so the movement of the voice coil engages a brake?
artifactingreality 1 year ago
@artifactingreality No, the movement of the voice coil changes the pitch of the blades. The fan rotates at a constant speed.
DussoJanladde 1 year ago
@DussoJanladde oh I see it now. Pretty clever.
artifactingreality 1 year ago
nice laser how many mw is it ??
joeblo231 1 year ago
have you played music on there??
bshawn41 1 year ago
That's not a true 1 Hz note. Make it a sine wave and it won't sound like shit like that.
AnythingLoud 1 year ago
put ur figner in it
hotxxxx 1 year ago 19
That sounds like an impulse, which is what you get when you have all the frequencies at equal amounts. I think it is possible to broadcast waterfall photographs using this subwoofer at a slow rate using a spectrum analyzer and a microphone that goes really low.
Amishman35 2 years ago
i don't get this shit.. i know it will make a bassy sound but that just sounds like thumping on a hollow wall. can it generate all the notes you would need for a home cinemar system? all you can hear is the motor is it loud at all?
L00peey 2 years ago
@L00peey
no mostly 0 to 20 HZ the rest of the notes you use mid range subs and speakers
musclekid13 2 years ago
@musclekid13 do they use those in cinemas?
L00peey 2 years ago
@L00peey
yea a few do that i know in my area.
musclekid13 2 years ago
@L00peey pc speakers won't pick up those low frequency notes.
fronteraroja001 2 years ago
@L00peey
you wont hear the motor, its hitting 1 hz right now.
IntoxicatedFailures 2 years ago
shut up you dumb fuck you dont even know your head from your ass
jesseadkins187 2 years ago
what?
IntoxicatedFailures 2 years ago
hahahah dont even remember what you got short term memory loss eddie?
what a dumbass what? aaaahh
only you would be commenting on this video hahaha
jesseadkins187 2 years ago
you sound like a wigger.
IntoxicatedFailures 2 years ago
thats alright you sound like a NIGGER hahah
jesseadkins187 2 years ago
id rather be a nigger than a wigger. Nothing is worse than a phony wigger such as yourself you fucking redneck. Piss off
IntoxicatedFailures 2 years ago
yeah well get back in the fields then you piece of shit
jesseadkins187 2 years ago
@IntoxicatedFailures He is a wigger, I've argued with him before lol.
macdaddyd1 1 year ago
oh its you you stupid faggot, get the fuck out of here.
IntoxicatedFailures 2 years ago
wtf?
klairkrosby 2 years ago
Speaking of square waves, I think a speaker system cannot properly make a square wave thus of the limitations of the systems internal capabilities and the speakers suspension. the damping is just not fast enough. Square waves are harmfull to speakers.
Bassotronics 2 years ago 3
It sounded like a square wave.
Amishman35 3 years ago 2
I always wanted to make something like that to put it in my car.
Bassotronics 3 years ago
I bet you'd love to hear Bass, I Love You on one of those. We all would. The Bass Will Destroy You would actually destory us on one of those! LOL
31Orcas 2 years ago
Instead of "Bass, I Love You", it would be called "Rotory, I destroyed You". LOL
Bassotronics 2 years ago 49
Nice one! BTW, you know those background vocals in your songs, right? Well, my mom loves the song "Bass, I Love You", but the background vocals scare the crud out of my sister, LOL. You should really post some FL Studio tutorials, at least on the methods you use becuase you are a lot better than any other FL Studio users who have posted tutorials here!
31Orcas 2 years ago
The way I make my music is top secret. Cant do tutorials. :) Tell your sister that and angel is who made the song. ;) Salute to you mom. I am glad she liked it. :)
Bassotronics 2 years ago
Angel who made the song... I already told her that someone who specializes in making bassy songs made it on his computer. Props for making up techniques so good you're not willing to let anyone know how you do it. Also, thanks for saluting my mom! : )
Your songs PWN BTW : ).
31Orcas 2 years ago
Bassotronics, your music is what made me actually like bass man, started out with a junky computer sub, now i got like 2 15"s among other things. Really enjoy the sub-bass frequencies in Bass, I love you.
666xGuitarplayerx666 2 years ago
Thanks for your kind words. I think I love myself!
I need 2 MTX 7500. They are hard to find!
Bassotronics 2 years ago
Dude, those would be epic! Aldo RE audio Destroyer 15"s man!
666xGuitarplayerx666 2 years ago
This has been flagged as spam show
Its just a matter of time before black guys will be putting these in there cars.
badssmofoyahoo 3 years ago 35
Who says only black guys like loud bass? I'm 14 and white and I'm begging my mom to get me a pair of Rockford Fosgate Punch 12's! : )
But true, one day this may replace Fi BTLs. Just wait, and in 5 years, Steve Meade might have 4 18" rotary subwoofers!
I wonder if a rotary tweeter is possible...
31Orcas 2 years ago
im white and have 3 12" subz in my truck. i was just talkin shit.
badssmofoyahoo 2 years ago
Okay.
31Orcas 2 years ago
Good thing the size of the sub has nothing to do with performance, I would have figured a white boy would have at least have the smarts to do some research on a topic before they start talking about it.
MrMikeyboy1002 2 years ago
@31Orcas what the hell. same here. bass is literally every thing. i'm white. i'm like basicly a raver. love techno. have a 2 200 watt subs 2 120 watt subs and 2 tweeters with a bunch more. whos the dumbass who told you "black guys only like bass"? i want to yell at him. lololol
bait28 2 years ago 2
I'm half Mexican and half white, and my Mexican uncle used to have two 15" MTX subs before I was born (I was told), so it's kinda in my genes. But yeah, all races like bass.
31Orcas 2 years ago 2
@badssmofoyahoo
lol
I don't think that would happen!
7,000+ dollars
chevyman217 1 year ago
@badssmofoyahoo
A year later and your comment is still fucking funny as hell, haha!
phattacorider 1 year ago
wounder what it would sound like working into a song?
turbotorana 3 years ago
This has been flagged as spam show
how can that be bass, it just sounds like a fag smacking on a door or something
pwND001 3 years ago
lol/...u cant hear it because ur speakers can't handle it,
ProJoe559 3 years ago
This has been flagged as spam show
Fuck you. i dont care
pwND001 3 years ago
This comment has received too many negative votes show
hahaha....Calm down...........b4 I shove a rotary woofer up UR ASS~~~
ProJoe559 3 years ago
The reason you can't hear the base is becouse the actual basesound is cuz it's recorded from the back of the sub... if it would have been recorded at the fron you would ahve heard it... sry for my bad english :P
Smekarn0 3 years ago 3
Fingers well away I would assume...
McDonaldsIsScum 3 years ago
Oooohhhh... cool!
31Orcas 3 years ago