Video Veljko Milkovic' - 2 Stage Oscillator with a Bedini pendulum.

[icanfeelthefreedom]

Cool! I came up with the very same idea a few days ago!

I had a slight variation than yours though

In my mind it would work by having a coil on the large pendulum, facing away from the pivot point, it would power a typical bedini wheel, except having a weight to make the secondary pendulum effect,

I thought it might be a wheel with a pendulum hanging off of it, but regardless, it would be powered by the coil on the machine, instead of seperate from the machine.

what do you think?

good luck!

[EyesonWhat]

Hey folks... why being so worried about Newton laws?? Einstein and Plank showed how the Newtonian laws works fine but the truth is another !! We have not written the last page in our Phisics book yet... don't you think it?

[g11690102]

ok does it push down too or only pull up?

[lesotl]

Do you want to understand overunity?

Search for OLRTW7Kdje4 keyword and watch that video..

Because it is a pure mechanical pendulum oscillator, our Newtonian minds will digest it.

Just watching it, you will understand (and feel) that is really working and that the EXTRA energy (THE overunity.. ; besides potential to kinetic gravitational.. ) IS THE CENTRIFUGAL FORCE m*v*v/R . (Search for Veljko Milkovic to see more demonstrations)

[1980PintoMan]

You have nothing to put it simply. You don't even understand what you are doing.

[marthale7]

Oh, I went to your channel, and I don't find anything. Can you please show what you know? I am open to see what you have found.

Peace I agree I don't understand what I have found, but I am moving forward, I am testing what I really do know. Cheers!

[BallinMafia]

nice work. I have been pondering this idea since i first saw Veljko's video for the first time.

[dodoshlodo]

Hey Mart

Energy = FxD = Force x Distance

U can measure the joules on the hammer side by seeing how far it moves for every rotation

compare that to electrical input power

[LiamXaoh]

@dodoshlodo - wrong. The distance of movement of the hammer is not a measure of the output power.

[madbillt66]

Seasons Greetings! I love your stuff,remember, the supercharger for the Hurricane and Spitfire was developed by two blokes in their shed,whereas the same for the ME109 had the combined efforts of Mercedes Benz etc......

Cheers Bill

[marthale7]

Thanks for the encouragement. Merry Christmas! :)

[Lidmotor]

Congratulation on the sucessful Bedini/Milkovic. I agree with Jetijs that this idea has great potential. Run it on solar and it gets even better.

[marthale7]

I finally got my reed switch going, ( used a commercial one, and has been running all day taking very very small bite of juice from the battery, It has gone down from 12.32 to 12.26V the reed switch makes all the difference!..

[RHEAD100]

Hi Mart; Thanks for linking this video with mine.

Good work. Could you make a few suggestions on how to run my 2 stage oscillator the way you run yours ?

My pendulum in video 7 is 145 pounds and at a 2 meter swing. Thanks.

[marthale7]

My thought was to buy a 3 inch thick ceramic magnet, and then put it on the bottom of the large pendulum. Next I was thinking of getting a magnet that is used on security doors to hold them shut, they have over 1,000 lbs force I would use this to repel the magnet on the bottom of the pendulum. This is my idea, have not idea if it will work...

[RHEAD100]

Thanks for getting back to me so fast, Mart.

Wow security door magnet. Great idea. I will call R.D.L. Door supply In Dallas Texas, tomarrow, and price them out.

I already have some very strong Neo. magnets.

In fact; I have one that will pull 217 Pounds.

And more than a dozen that will pull 87 pounds each. And lots of smaller ones.

As for the 12 times out to in. Those figures were for an exact size machine. I have done far more. Like 18 more out than in.

Keep up the good work.

[gabydewilde]

nice one old man.

One thing to keep in mind. The more load you put on the Milkovic lever the less input it needs. If you put to much load on the lever it wont draw any energy from the pendulum swing.

Good luck!

[marthale7]

Yes sounds like you you know this better than I do :) I guess in this video I have put too much load on it. Think I understand now why the inventor used such heavy metal in his setup.

[electrician725]

Hey Mart, "justanelectrician" from Imhotep's and TEEP here... Nice work so far! *****

Hope to do some work with you and possibly swap some parts too :D

[marthale7]

Thanks! :)

[rcjera]

Try using copper for one contact and steal for the other for your reed switch!

Nice work!!!!

[marthale7]

I tried that as well.. I think I will try different type of razor blade, I am thinking the metal type may make a difference.

[Jetijs]

Great setup! Keep up the good work you are doing. I believe there is a lot of potential in this principle!

[marthale7]

Thanks!