I will never buy Link again after this product. How can you recommend it? This is the worst rougher ever. I am going to be posting my own review and will do a vid response explaining how what was promised on the box was not delivered or taken away.
If Ron Jeremy & Danny McBride had a boy it would look like Mike. JK man thanks for the review I was looking for info about this router. BTW I love Ron and Danny.
Insert the cd? Really?!!?! How stupid do you think we are? 192.168.1.1 will get you into the router, from there you can set your router up accordingly. Insert the cd lmao!
For the record I do own this router and love it, great range and speed. No cd required unless you have min tech knowledge.
@lschlutt73 WRONG. 192.168.1.1 will NOT get you to this routers GUI. Maybe a Linksys router, but not a D-Link router. D-Link uses 192.168.0.1. This video was made for beginners, so before you go mouthing off about how great you are, get your facts straight.
@lschlutt73 WRONG. 192.168.1.1 will NOT get you to this routers GUI. Maybe a Linksys router, but not a D-Link router. D-Link uses 192.168.0.1. This video was made for beginners, so before you go mouthing off about how great you are, get your facts straight.
@misterbearbe not really I love that I was looking for blue LED lights to put in my room but I guess I won't even need to buy it anymore because this Router has some awesome ones.
sorry if i write double comment but this Modem helped me alot to increase my internet connection , since then my web pages and skype runs very smooth than ever. Cons : Expensive but worth the money.
Does anyone know if the USB device conected (Like External HD) can be seen from the internet using a public ip addres with shareport installed in the remote computer?
Hey my Internet is really crappy, and when I play xbox it takes like 1-3 minutes to find a match, plus I cannot connect to most of my friends. Will this router decrease the time to find matches, and help me connect better to my friends?
Disconnect the left and right antennas and walk around your house using Net stumbler to monitor the RSSI graph guranteed you will only pick up the weak signal from the internal antenna thats on the board to prevent damage to the transmitter. Connect the left antenna and follow the same procedure. You should get a strong signal. Connect the right antenna and again you should get a much stronger signal. I don't know what the fuck D-link is doing but they are garbage!
I have two 655's and I would like to use the second one as an access point to boost the signals from my 4 linksys wireless cams.......does anyone know what I should do to acheive this?
A router will never be INSTALLED! You can never INSTALL a physical router on a computer ! How can someone - moreover from D-Link - imprints on the Router Wizard CD that that CD is an installation CD and that with that CD you install the router?! You are just simply setting its software configuration but you DO NOT INSTALL the router! A router is been already installed with its OS on its own hardware on the manufacturing site! Never heard a more stupid thing ever!
I still haven't bought this router but I have a question, I own a netbook laptop and it does not have a space for putting discs in. What do I need to do in order to install? also can I use another computer (laptop as well) to instal the router? and also how do I make it work on a videogame console?
Are the specs of this router still the same if you have a slow internet connection? At the moment I use the verizon router/modem but that can only support one item at a time. I ran an internet speed test and it says its like 1.9 mbps but I can pretty easily play PS3 online so Im not too sure how thats possible. But im off subject. I just wondered will this still work at those same speeds with that slow connection.
Hey man..May i ask you a question?... My house has four floors and I want the wireless signal reaches full..Will this router work perfectly?. by the way how much cost?.. ive seen in best buy in $180. ..i really want to buy 1 router and bring it to my country - Peru... thx buddy .
Hey man..May i ask you a question?... My house has four floors and I want the wireless signal reaches full..Will this router work perfectly?. by the way how much cost?.. ive seen in best buy in $110. ..i really want to buy 1 router and bring it to my country - Peru... thx buddy .
Hey, I am just wondering...did your dlink ever disconnect on you? When I first installed it it used to disconnect every so often, usually when loading youtube vids and stuff. Ever since I changed mixed mode to N/G mode only its been working like a charm...so far and hopefully will stay lol. Also, my Internet LED like is blink crazy fast all day. Is that normal too?
If you ever need help downgrading from a 1.3x Firmware back to 1.21 then i have no problem helping, just send me a message thru here and i'll respond.
It says in the Dlink site that its NOT downgradeable, but NOTHING is impossible. Just acouple of simple steps to follow thats too long to post here. Let me know,
Is the software CD compatible with Vista 64-Bit and/or Windows7 64-Bit? The reason I ask is my old WNDR3300
RangeMax Dual Band Wireless-N Router was not. The disc never did work with a 64-bit OS. So I had to call up tech support to walk me through the set up. Needless to say, I've not been happy with it. I got the wireless so I could use it with my iPhone and Laptop. Will the D-Link DIR-655 work with the iPhone's Wi-Fi?
You won't see speeds higher than 130Mbps with current generation hardware. The 300Mbps number is a theoretical data rate. The 130Mbps you are seeing is what is called throughput. You actually have a higher throughput than the 125Mbps I was able to achieve here in the lab.
Thank you for the input! FYI I am using Sony VGN-NW 150J with Intel WiFi Link 5100 AGN and the DIR-655. At this time, SmartWi says speed@ 65Mbps. Wireless Network Connection Status shows speed@ 130.0Mvps. Sometime speed fluctuates from mid 50's-130. You have a new customer 4 life! Thank You for your response!
What you are seeing is the router switch between 20 and 40MHz mode. This is for compatibility. 802.11g uses a 20MHz channel width. If all of your wireless equipment is 802.11n, try setting the router to 802.11n only mode and your connection should be steady at the higher speed.
Also, if all of your equipment is 802.11n and somebody close by has an 802.11g device, they can slow down your network. In this case you'd want to lock it down to 802.11n aso.
How do I lock the router down to 802.11n? It is set on mixed mode I can see but can not figure how to lock it down. Currently there are 6 G-routers in range... Thanks
I looked through all of the DIY episodes and it looks like I haven't made an episode showing how to lock down your router to 802.11n mode. It is really simple.
1. Login
2. Click the Setup tab at the top
3. Click the Wireless Settings button on the left
4. Scroll down to the bottom of the page
5. Click the Manual Wireless Network Setup button
6. From the 802.11 Mode drop down select 802.11n only.
This has been flagged as spam show
I will never buy Link again after this product. How can you recommend it? This is the worst rougher ever. I am going to be posting my own review and will do a vid response explaining how what was promised on the box was not delivered or taken away.
iluvherb2 2 months ago
kenny fukin powers :)
blingmow101 3 months ago
If Ron Jeremy & Danny McBride had a boy it would look like Mike. JK man thanks for the review I was looking for info about this router. BTW I love Ron and Danny.
myriadcorp 5 months ago
you missed the most important part, what mbps if it is your most popular, it must be same as TrendNet most popular, at 400mbps?
arnoldcustom 5 months ago
Hey i saw you in youporn!?!?!
johnchristian0131 5 months ago
Insert the cd? Really?!!?! How stupid do you think we are? 192.168.1.1 will get you into the router, from there you can set your router up accordingly. Insert the cd lmao!
For the record I do own this router and love it, great range and speed. No cd required unless you have min tech knowledge.
lschlutt73 9 months ago
@lschlutt73 WRONG. 192.168.1.1 will NOT get you to this routers GUI. Maybe a Linksys router, but not a D-Link router. D-Link uses 192.168.0.1. This video was made for beginners, so before you go mouthing off about how great you are, get your facts straight.
SpudgeBoy 9 months ago
@lschlutt73 WRONG. 192.168.1.1 will NOT get you to this routers GUI. Maybe a Linksys router, but not a D-Link router. D-Link uses 192.168.0.1. This video was made for beginners, so before you go mouthing off about how great you are, get your facts straight.
SpudgeBoy 9 months ago 2
Good router but they failed on the LED lights.. TOO BRIGHT IN A BEDROOM
misterbearbe 10 months ago 2
@misterbearbe not really I love that I was looking for blue LED lights to put in my room but I guess I won't even need to buy it anymore because this Router has some awesome ones.
Cheddar323 6 months ago
What do i do if i lost my cd?
rocboylal 11 months ago
sorry if i write double comment but this Modem helped me alot to increase my internet connection , since then my web pages and skype runs very smooth than ever. Cons : Expensive but worth the money.
forzamicha46 11 months ago
@forzamicha46 Its not expensive at all..
misterbearbe 10 months ago
@misterbearbe in my place it's expensive :) but as i wrote before , worth the money :)
forzamicha46 10 months ago
good news i used this CD and it was the only way to configure my AZTECH 600E DSL MODEM with this marvelous DLINK DIR 655
:-)
forzamicha46 11 months ago
Is the modem built in?
d1jal 1 year ago
Does anyone know if the USB device conected (Like External HD) can be seen from the internet using a public ip addres with shareport installed in the remote computer?
albertomendoza85 1 year ago
Hey my Internet is really crappy, and when I play xbox it takes like 1-3 minutes to find a match, plus I cannot connect to most of my friends. Will this router decrease the time to find matches, and help me connect better to my friends?
ChidoriFreak23 1 year ago
This has been flagged as spam show
Disconnect the left and right antennas and walk around your house using Net stumbler to monitor the RSSI graph guranteed you will only pick up the weak signal from the internal antenna thats on the board to prevent damage to the transmitter. Connect the left antenna and follow the same procedure. You should get a strong signal. Connect the right antenna and again you should get a much stronger signal. I don't know what the fuck D-link is doing but they are garbage!
computertech1979 1 year ago
cd is for noobs, pros just need to hook it up and access the router
JayzBeerz 1 year ago
I have two 655's and I would like to use the second one as an access point to boost the signals from my 4 linksys wireless cams.......does anyone know what I should do to acheive this?
eastonivan 1 year ago
A router will never be INSTALLED! You can never INSTALL a physical router on a computer ! How can someone - moreover from D-Link - imprints on the Router Wizard CD that that CD is an installation CD and that with that CD you install the router?! You are just simply setting its software configuration but you DO NOT INSTALL the router! A router is been already installed with its OS on its own hardware on the manufacturing site! Never heard a more stupid thing ever!
xehasmena 1 year ago
I still haven't bought this router but I have a question, I own a netbook laptop and it does not have a space for putting discs in. What do I need to do in order to install? also can I use another computer (laptop as well) to instal the router? and also how do I make it work on a videogame console?
Thanks in advance!
rodrich266 1 year ago
is it easy to portforwarding this router? I've a philips SNB6500 which I am having problems with portforwarding it.
Toushirou10th 1 year ago
Is the cable provided a category six cable?
roxxas5 1 year ago
Are the specs of this router still the same if you have a slow internet connection? At the moment I use the verizon router/modem but that can only support one item at a time. I ran an internet speed test and it says its like 1.9 mbps but I can pretty easily play PS3 online so Im not too sure how thats possible. But im off subject. I just wondered will this still work at those same speeds with that slow connection.
mrantis 1 year ago
Do you really need the disc, because my sister lost the guide, disc, and the stand....
Aznboixyz89 1 year ago
Hello,
I'm using a Xtreme Wireless N Gigabit Router, is it possible for me to connect my line without using a modem, if so, can you tell me how to do it
quetip147 1 year ago
how I find my account name and password ? ^^
MrJezez 1 year ago
This has been flagged as spam show
Hey man..May i ask you a question?... My house has four floors and I want the wireless signal reaches full..Will this router work perfectly?. by the way how much cost?.. ive seen in best buy in $180. ..i really want to buy 1 router and bring it to my country - Peru... thx buddy .
XxBleitzixX 1 year ago
Hey man..May i ask you a question?... My house has four floors and I want the wireless signal reaches full..Will this router work perfectly?. by the way how much cost?.. ive seen in best buy in $110. ..i really want to buy 1 router and bring it to my country - Peru... thx buddy .
XxBleitzixX 1 year ago
Hey, I am just wondering...did your dlink ever disconnect on you? When I first installed it it used to disconnect every so often, usually when loading youtube vids and stuff. Ever since I changed mixed mode to N/G mode only its been working like a charm...so far and hopefully will stay lol. Also, my Internet LED like is blink crazy fast all day. Is that normal too?
junmae808 1 year ago
I didn't know Eon Jeremy did router reviews but it was great thank you Ron.
hafftrak 1 year ago
do u think this router is good for 2 xbox 360 a laptop and streamin HD movies at the same time
rancybajapanty 2 years ago
This has been flagged as spam show
If you ever need help downgrading from a 1.3x Firmware back to 1.21 then i have no problem helping, just send me a message thru here and i'll respond.
It says in the Dlink site that its NOT downgradeable, but NOTHING is impossible. Just acouple of simple steps to follow thats too long to post here. Let me know,
SABII1002 2 years ago
whats better this or the 825?
IAreCrazyChris 2 years ago
I have a 16mbps connection from Cogeco, will this router lower my download speeds or increase them?
Halaryoos 2 years ago
Is the software CD compatible with Vista 64-Bit and/or Windows7 64-Bit? The reason I ask is my old WNDR3300
RangeMax Dual Band Wireless-N Router was not. The disc never did work with a 64-bit OS. So I had to call up tech support to walk me through the set up. Needless to say, I've not been happy with it. I got the wireless so I could use it with my iPhone and Laptop. Will the D-Link DIR-655 work with the iPhone's Wi-Fi?
4BetaMale2 2 years ago
Win7 64 bit compatible. That is what I have. Have not seen speed over 130mbps. Sure it is my problem not the 655. trying to get some hints here.
182QKFTW 2 years ago
You won't see speeds higher than 130Mbps with current generation hardware. The 300Mbps number is a theoretical data rate. The 130Mbps you are seeing is what is called throughput. You actually have a higher throughput than the 125Mbps I was able to achieve here in the lab.
DLinkTV 2 years ago
Thank you for the input! FYI I am using Sony VGN-NW 150J with Intel WiFi Link 5100 AGN and the DIR-655. At this time, SmartWi says speed@ 65Mbps. Wireless Network Connection Status shows speed@ 130.0Mvps. Sometime speed fluctuates from mid 50's-130. You have a new customer 4 life! Thank You for your response!
182QKFTW 2 years ago
@182QKFTW
What you are seeing is the router switch between 20 and 40MHz mode. This is for compatibility. 802.11g uses a 20MHz channel width. If all of your wireless equipment is 802.11n, try setting the router to 802.11n only mode and your connection should be steady at the higher speed.
Also, if all of your equipment is 802.11n and somebody close by has an 802.11g device, they can slow down your network. In this case you'd want to lock it down to 802.11n aso.
DLinkTV 2 years ago
How do I lock the router down to 802.11n? It is set on mixed mode I can see but can not figure how to lock it down. Currently there are 6 G-routers in range... Thanks
182QKFTW 2 years ago
6 Routers, plus whatever is connecting to them.
I looked through all of the DIY episodes and it looks like I haven't made an episode showing how to lock down your router to 802.11n mode. It is really simple.
1. Login
2. Click the Setup tab at the top
3. Click the Wireless Settings button on the left
4. Scroll down to the bottom of the page
5. Click the Manual Wireless Network Setup button
6. From the 802.11 Mode drop down select 802.11n only.
And be watching for the DIY video on this.
DLinkTV 2 years ago
I worked the above commands and see 130Mbps Steady. U get Employ of the month Thanks again!
182QKFTW 2 years ago