The gc buttons are very hard to press. Try as hard as you physically can without destroying the gc controller. ive tried gc controller, it will work if the gc controller is fully functional.
Just incase anybody was wondering... You can also plug in a dance pad and push on all 4 arrows, I used a couple of household objects for the other two.
please help me because my is 4.3 unbrick and i got friend on black ops i just miss plying it plese.i xplane i was just tring to put my stuff to 4.2u then its cuts off then it just like that but please help me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
aww man MY wii has corrupted files and it wont start please help idk what happened my warantie is probably wont work anymore :( :( please man help me if you can I am very mad my wii is broken . it says it has corrupted files and to refer to the intruction manual with all broken letters ??? PLEASE HELP. !
Hey um dud does this work on 4.2U wii ?? my wii is from 2006 and i think ti reads backups but so what do i do after the when i ssee the FW in the bottom of my screen i put it a disc wihth an update ?? well i downloaded and AUTOBOOT DISC and burnt it to a DVD+R and i have no modchip it doesnt work but if i burnt it to DVD-R at 2 or 4x will it work? or will i need to get a wii disc with an update to it?
@10Gr1fterbang Yes i am trying to fix my wii its from 2006 with 4.2U and i accidentall installed a bad theme so yeah it bricked i can use SaveMiiFrii with the GC Pad i load the thing i can see my Firmware on the bottom screen its 4.2USA but my question is do i have to get a game with an update and load it through there or i can burna Boot Mii v1 disc and load it like that wihhout a modchip
simply fallow my video all the way through, do everything shown, but have a newer game that has the 4.3u or higher update. you may not be able to hack it again but it will be fixed. there is no boot disc thing needed for this. just after you see the fw at the top, throw in a newer game and it should fix it
@10Gr1fterbang so i dont need BootMiiv1 disc ?? its a backup disc DVD+R i inserted it into the drive and it doesnt read it for some erason i have a 4.2 usa wii my drive is a 50/50 chance ui cant read backups and i geuss not cause i tried to do the BootMiiv1 disc and the Autoboot HBC but didnt work
all i can say is take a look at your barcode on the bottom of your wii, its its LU63 or lower, you can read dvd-r discs and downgrade ect. from there use the instructions in my video and get/rent/buy/barrow a game that has the 4.3u or newer update/. thats all the info i got man
@10Gr1fterbang Wai wait wait omg omg omg dude i uae LU360850 as a serial for wii i can read backups right ???YEAH?? but why isnt it working when i burned a BooMiiv1 disc toa DVD+R SOny lol wha the hell? by the way thanks for the info really helped i will try to get a game with th update but whcih one lol i only know supermario galaxy / MEtroidOther M/ Kirby and Mario All stars
Help! I was instaling the piiloader and it froze. so like it said in the video to restart my Wii, it wouldn't restart after holding in the power button for almost one minute. So I unplugged it, now I get the black screen. Any solutions? -Thanks!!
soooo... lemme get this strait.. your youtube account name is "WiiRCODHackers" and YOU are asking ME for help? (anything seem strange here?)
all i can say to help is get the gc controller, get new game that has a later fw than what you had when you started having probs, get a clamp, fallow through my video and good luck to you
i resently tried to isntall the homebrew channel with the newest way to do it using lego starwars, i got homebrew and a put gecko os 1.9.3.1 and i tried a no recoil hack for black ops, and it worked, then i tried to load some other hack, and i could never load gecko os ever again so a tried doing other things on the video with the tut, and eventualy i ended up with a bricked wii that doesnt even start up, the green light shows up but now video response to my tv D:
in mine that doesnt happen??? in mine its just a black screen and nothing boots, i try autoboot disks, holding reset button to load bootmii, and nothing happens, oh and I have my nand back up, what can i do?????
@10Gr1fterbang yo can i have the mym file for windows i cant find that theme on wadder? i have theme mii so i can make the mym to a csm (yes i have installed a ton of themes and have bootmii as boot2)
first you mod your wii than you find SAFE (converted) themes. Note: themes can brick your wii so get experienced with wii modding.customising before attempting to change your theme. use mymenuify to change your theme
nice video my wii is bricked by installing a csm theme if i turn on my wii the screen is all green ive not tried to unbrick it yet but i want to now how the game updates the wii my wii bricked because my wii is a 3.2e and i installed a 4.2e theme so would my wii unbrick if i follow all the steps and put new mario bros in the wii?
it may not work for the different region. but if the wii is bricked anyways, you have nothing to lose. i have converted 3.2e themes to work on a 3.2u wii so that may work. if i were you, id just go for it. good luck friend.
@nissengummihone Now they tell me? -_-* I Should of paid $10 more then to have been a tight ass to get meteroid prime or what ever its called. Will The new black ops game work? Im going to find a way to sell carnival games to get my money back.
I get the number in the corner I put the game in but now it just stays a black screen I noticed ididnt have my ethernet cord plugged in the first time crap..... i might of just blew a big chance any ideas? it loads jsut black screen now no menu
@JarrodDrover123 i did the same thing with the dark theme its a biznatch um what version u on cuz when i did it i push the gc control buttons then 3.4u came up then i inserted netflix cd waited about 2 mins and boom wii back to normal like brand new only still had the hacks like homebrew working and everyting still on there
@trapedinmymind Well i did that and 3.1U came up so i stuck in like resident evil darkside chronicles nuthing happend after 15 minutes now whnever i turn my wii off and on it stays black and i cant get the numbers in the corner to come up with a gamecube controller i have turned it off and on about 20 times to a black screen now without any frozen dark theme wii menu any ideas?
@JarrodDrover123 just keep trying the gc thing make sure u push the bottons really hard idk make sure ur using a disk thats new i tried about 4 disks till i remembered i just got netflix and boom poped it in everything went back to normal so idk just keep trying im not a great hacker but this worked for me just keep try;ing
@trapedinmymind ok i will try the gamecube controller it wont appear after the very first time i did it and now it only boots with a black screen I think im screwed :(
@trapedinmymind how do you no if it works when the numbers come up and you stick a new game in or in your case net flix cd does it load straight to homebrew channel or what? if you could help me out would be appreciated I need to buy a screw driver to open up my gamecube controller tomorrow.
okie so i bricked someone elses wii my dad just bought it yesterday from somone else its 3.4u idk how the moded it but i put the dark theme on it and reset itand now its just stuck on the dark theme screen before u even get to the menu i did the control it worked got 3.4u on bottom but in animal crossing and nothing happened and i put in another game and wait 15 mins still nothing is it the game or the wii idk what to do its a lu5
@trapedinmymind same problem man and im 3.1 im going to try the gamecube controller trick to tell em if you get it fixed and let me no how you did it.
okie so i bricked someone elses wii my dad just bought it yesterday from somone else its 3.4u idk how the moded it but i put the dark theme on it and reset itand now its just stuck on the dark theme screen before u even get to the menu i did the control it worked got 3.4u on bottom but in animal crossing and nothing happened and i put in another game and wait 15 mins still nothing is it the game or the wii idk what to do its a lu5
I get the fw on the lower right corner but what do you do after that. I put the disc in then it reads for a mintute or so then stops. What do I next??? Plz need advice
what fw are you, and what game are you using? hopefully you have a game that has a newer fw/update than your wiis fw. it will than take 5 minutes or so. but unfortunatly all wiis are different, there is no gaurantee that this will work the same for different wiis.
Hey I have a wii 4.1u that's bricked I install the darkwii theme on it and everytime I boot it up and click A it freezes plzz help me is there a way to get priloader on it but I can't accses my wii.... PLZZZ Help Me
I am 99.9% sure beyond the shadow of a dout that you can't put priiloader on there if you havn't already. the only thing to do in this situation is to get a gamecube controller, and do that trick i show in this video. otherwise keep looking for vids on that situation..by all means, there is hope.
that sounds like an ios249 (it could be). just make sure you have a newer game and you are pressing down all of the directionals on your gc controller while the wii boots. but all wiis are different unfortunatly.
than you got lucky, good! just remember (and this goes for everyone else too) you all have to put priiloader back on there asap if you downgrade. downgrading whipes out priiloader!!
as shown in my video, you will need to get to that screen an then put in a newer game that goes. BUT, whats different in your case is that you have 4.2u usa, you will need to wait untill a game comes out that has the 4.3u update. (4.3u update may or may not happen, i dont know 4sure). or place a newer game with an update into your wii after seeing that screen.
@10Gr1fterbang thanks. im going to borrow New super mario bros wii tomorrow from a friend. and by the way, do u know where u bough the converter for the ps1 controller?
no the controller is fine lol, i have fixed many wiis with it and i still play street fighter with it!. and its a ps1 controller with a converter to connect to a xbox or gamecube.
Gr1fterbang ill send u a video i made of what my wii looks like ok i made a new one ok ... please send me the preloader files and all the files u used to unbrick your wii please cause i know u have worked it before ill be video taping what i did and then ill put it on youtube for u to see ok so please send me the files u used ASAP. Is there a sequence of how to press the buttons on the GC pad
Gr1fterbang ill send u a video i made of what my wii looks like ok i made a new one ok ... please send me the preloader files and all the files u used to unbrick your wii please cause i know u have worked it before ill be video taping what i did and then ill put it on youtube for u to see ok so please send me the files u used ASAP. Is there a sequence of how to press the buttons on the GC pad
did the same as you did to brick it ;( I got a new Wii yesterday and it have already happend to me. So im wondering if i can access the fw version down the corner without preloader installed? I got fw 4.0E
@10Gr1fterbang Okey, but does my GC controller need to be disambled to push the pad? Or can it be as it is now? And what disc do i need to make it fix? What disc did you use to unbrick your Wii and to make it fixed?
@10Gr1fterbang ok since your the big smarty around here ... i need help to unbrick my wii as u already know but its way different than u think i updated my firmware through a file i didnt even know of thinking it was to update to wii version 4.1 but it was some stupid bricking file ... so whats the sequense of how im suppost to press the buttons whats the link i have to have to download the universal unbricking files and how am i suppost to do UNBRICK a Fully Bricked wii
@10Gr1fterbang i updated my firmware to 4.1 not knowing what type of region it was from it said returning to wii menu then i get a black screen can u help me and i need a download link for Universal Unbricking disk. unless u know how to help me another way but i would really like to know the sequence of how u pressed those buttons down instead of a PS1 controller ... i dought a PS3 controller would do any good i have a GC controller anyway (JUST A BLACK SCREEN NO WORDS ON IT NO NOTHING)
this video may help you, but is not a 100% success for all wii errors.. i have seen a case where a wii was toggled in a black screen error and i could not retrieve it with this method. luckily i was able to undo what i did as i uninstaled a file that caused my prob. i had a converter thing for the ps1 controller, and no a ps3 controller wont work. you need to use a gc controller, hold all 4 buttons as you turn on the wii and hold them untill you see your fw on the lower right
@10Gr1fterbang can u send me those files u have on your SD card that u have so that i can do it just the way u did please ... i have already taken apart my GC controler and almost lost all the buttons but didnt anyway ... can u send me those files for preloader cause i dont have preloader installed on my Wii. i dont think... ill make a video of what my wii looks like and stuff so check it out the first time i tried uploading it was success but somehow failed anyway ill get it on youtube
clamp those 4 buttons as hard as possible to be sure. and then update with new mario bros, or silent hill shattered memories. or any other newer game you can get a hold of.
@10Gr1fterbang Hello tried it today with my brothers GC controller and it dont work :(
It is not customised/modified on anyway and the error is showing anyways and i am pressing the pad manually. But what pad is it to press? :)
I am new to dat, could u please do a same tutorial but with a GC controller? And what firmware/recovery disks do i need? Universal Unbrick Disc v2 or what ??
hello..just a quick question about my wii, yesterday it was running fine on firmware 4.2e pal console softmodded ,homebrew,,,,neogammer,,,,,,,,usbloader ,i tried to install a nes wad and after re-booting im only getting a black screen and the wii remote is not synced anymore ??????????dont know what kind ov brick iv got or if maybe this method will work for me,,,,,thanx to anyone who responds in advance
@10Gr1fterbang that sounds better 4 me ,,,"BUT" how do i get any title deleter to respond with me only getting a black screen and the wii remote not syncing to the console , iv just got myself a gc controller today and dont get a responce from port 4 ,what do you think,,,,,,,,,,?????hmmmmmmmm
Alright I have a question, I tried to put homebrew channel on my wii and I pulled out the card and now my power button is completely black even if I plug the wii back in. and I can't even turn on my wii. what do I do?
ok when i turn it on with no cd in it makes the noise like im trying to put one in it and nothing comes up at all. the tv makes a white flash for a sec but thats all.
no it depends on the game you tried, and wii and the firmware you had when you bricked.
try new mario bros, punch out, silent hill ect.
you may have to wait for a game that has a newer update that you need. but there IS hope because you saw the rescue menu!! what was your wiis firmware?
in that case. i recommend rent silent hill shattered memories. as i have seen that work on a 4.1 with my own eyes. and becuase you have gotten the rescue menu to show up.
remember, get that menu to show up, than pop in silent hill shattered memories.
Hey I have another question. If I update my wii the first time and then try to download the homebrew channel will my wii brick? And if it doesn't brick will it still download the channel?
gamecube controllers work the same as displayed in this video. (i have also tried a gamecube controller).
clamp 4 directionals with clamp that will make (so you dont have to take apart your wii), than put in 4th player slot turn on wii. hold down buttons hard enough
i have seem more than 3 different bricks, the one in this video, black screen, menu freeze. ALL of what i ran into was curable. on 3.2u and 4.1u. (wii in this video is a 3.2u)
but depending on your firmware. is it 4.2u or higher? that may be why.
whats your firmware?
but no matter what, keep the wii and keep trying to clamp the buttons down, and do it HARD. or you may have to take the gc controller apart and press and hold all 4 bottons as you turn the wii on
I Don't have Priiloader installed, I don't get the "system files are corrupted" message and when I try using the D-pad fix, get nothing. am I screwed?
.3 people failed at fixing their wiis. 1 person accounts for every one else^ ^
LMFAO
10Gr1fterbang 2 months ago
GENERAL NOTE TO ALL:
There is a troll on the loose!!><
I am sorry if this guy has giving anyone a hassle, his name is 13addict13.
Just ignore him if he strikes.
10Gr1fterbang 2 months ago
@10Gr1fterbang
i have since told 13addict13 off, he knows his place... (such a newb with wiis).
he wont troll anyone on here ever again.
10Gr1fterbang 2 months ago
i try to push my buttons on my gc remote and it doesnt work
15Ibans 2 months ago
@15Ibans
The gc buttons are very hard to press. Try as hard as you physically can without destroying the gc controller. ive tried gc controller, it will work if the gc controller is fully functional.
10Gr1fterbang 2 months ago
Just incase anybody was wondering... You can also plug in a dance pad and push on all 4 arrows, I used a couple of household objects for the other two.
mroy0505 3 months ago 2
u sir just made my morning.the only thing is i now have 2 wii's
Gubble118 3 months ago 4
please help me because my is 4.3 unbrick and i got friend on black ops i just miss plying it plese.i xplane i was just tring to put my stuff to 4.2u then its cuts off then it just like that but please help me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DEANDRE32100 3 months ago
umm I did this but it didnt update anything
BloodyiBall0 4 months ago
@BloodyiBall0 What firmware are you on ., and did you put a disk that needs a update on it
FlyingMinccinos 4 months ago
@FlyingMinccinos ahh nvm man my wii is working again thanks anyway
BloodyiBall0 4 months ago
i HOPE THIS WORKS DUDE IF IT DOES ILL BE VERY VERY VERY VERY VERY VERY VERY VERY VERY HAPPY ! I HAVE THE SAME AS YOU
BloodyiBall0 4 months ago
@BloodyiBall0
what fw are you? i may be able to help if you still need it
10Gr1fterbang 4 months ago
aww man MY wii has corrupted files and it wont start please help idk what happened my warantie is probably wont work anymore :( :( please man help me if you can I am very mad my wii is broken . it says it has corrupted files and to refer to the intruction manual with all broken letters ??? PLEASE HELP. !
BloodyiBall0 4 months ago
i have no priiloader and bootmii does it work nevertheless ?
gokumasterssbb 4 months ago
@gokumasterssbb
what firmware is your wii?
10Gr1fterbang 4 months ago
@gokumasterssbb i think 3.2
gokumasterssbb 4 months ago
my not load up the menu
hauhuynh 5 months ago
i try this stuff and my wiii not load it up i co GC controller and i keep try like few time not even work my wii version 4.2
hauhuynh 5 months ago
why not qorking on my wii i got gamecube controller
hauhuynh 5 months ago
Hey um dud does this work on 4.2U wii ?? my wii is from 2006 and i think ti reads backups but so what do i do after the when i ssee the FW in the bottom of my screen i put it a disc wihth an update ?? well i downloaded and AUTOBOOT DISC and burnt it to a DVD+R and i have no modchip it doesnt work but if i burnt it to DVD-R at 2 or 4x will it work? or will i need to get a wii disc with an update to it?
carsonrules10 5 months ago
@carsonrules10
is it a wii you are trying to fix?
10Gr1fterbang 5 months ago
@10Gr1fterbang Yes i am trying to fix my wii its from 2006 with 4.2U and i accidentall installed a bad theme so yeah it bricked i can use SaveMiiFrii with the GC Pad i load the thing i can see my Firmware on the bottom screen its 4.2USA but my question is do i have to get a game with an update and load it through there or i can burna Boot Mii v1 disc and load it like that wihhout a modchip
carsonrules10 5 months ago
@carsonrules10
simply fallow my video all the way through, do everything shown, but have a newer game that has the 4.3u or higher update. you may not be able to hack it again but it will be fixed. there is no boot disc thing needed for this. just after you see the fw at the top, throw in a newer game and it should fix it
10Gr1fterbang 5 months ago
@10Gr1fterbang so i dont need BootMiiv1 disc ?? its a backup disc DVD+R i inserted it into the drive and it doesnt read it for some erason i have a 4.2 usa wii my drive is a 50/50 chance ui cant read backups and i geuss not cause i tried to do the BootMiiv1 disc and the Autoboot HBC but didnt work
carsonrules10 5 months ago
@carsonrules10
all i can say is take a look at your barcode on the bottom of your wii, its its LU63 or lower, you can read dvd-r discs and downgrade ect. from there use the instructions in my video and get/rent/buy/barrow a game that has the 4.3u or newer update/. thats all the info i got man
10Gr1fterbang 5 months ago
@10Gr1fterbang Wai wait wait omg omg omg dude i uae LU360850 as a serial for wii i can read backups right ???YEAH?? but why isnt it working when i burned a BooMiiv1 disc toa DVD+R SOny lol wha the hell? by the way thanks for the info really helped i will try to get a game with th update but whcih one lol i only know supermario galaxy / MEtroidOther M/ Kirby and Mario All stars
carsonrules10 5 months ago
you can still press the A button and goes to screen but still blank COMPLETLEY not bricking
reaproop17 5 months ago
dang i thought i was at the right one my problem is then when u tun my wii on and its pluged in it sill turns on but nothing happens after that
reaproop17 5 months ago
Help! I was instaling the piiloader and it froze. so like it said in the video to restart my Wii, it wouldn't restart after holding in the power button for almost one minute. So I unplugged it, now I get the black screen. Any solutions? -Thanks!!
WiiRCODHackers 5 months ago
@WiiRCODHackers
soooo... lemme get this strait.. your youtube account name is "WiiRCODHackers" and YOU are asking ME for help? (anything seem strange here?)
all i can say to help is get the gc controller, get new game that has a later fw than what you had when you started having probs, get a clamp, fallow through my video and good luck to you
10Gr1fterbang 5 months ago
@10Gr1fterbang
Idk why I named my account that...Thank you though :)
WiiRCODHackers 5 months ago
Comment removed
WiiRCODHackers 5 months ago
PLEASE READ FOR CHRIST SAKE
FYI
NO MOD CHIP NEEDED
10Gr1fterbang 7 months ago
CAN SOMEONE HELP ME FIXING MY 4.3U WII?I BRICKED IT BECAUSE (LIKE AN IDIOT)ERASED THE MENU!HELP!HELP!HHEELLPP!!
ToonRiyad 8 months ago
i resently tried to isntall the homebrew channel with the newest way to do it using lego starwars, i got homebrew and a put gecko os 1.9.3.1 and i tried a no recoil hack for black ops, and it worked, then i tried to load some other hack, and i could never load gecko os ever again so a tried doing other things on the video with the tut, and eventualy i ended up with a bricked wii that doesnt even start up, the green light shows up but now video response to my tv D:
jimmjimm6699 8 months ago
my wii is bricked but i have my wii patched so savemii wont work uninstalled bootmii as boot2 [crapy idea] and priiloader wont boot so im screwed : (
yofail1 9 months ago
what abuot wad manager i put a diffrent iso what happens will i brick my wii??
sonicchriz 9 months ago
"Install OK!"
"Psych!"
PIKACHU49386 10 months ago
i have a wii version 4.3u what game should i put in my wii to do the update
kwsc03 10 months ago
@kwsc03 I think wii party and the 25th mario anniversary game.
2pj2the2best2 10 months ago
@kwsc03 de blob 2 will works
yofail1 9 months ago
@10Gr1fterbang I tried priiloader once,but it was a pain!
It wouldn't install and that stuff...
I'm just safe with downloads now,so i can't brick it!
(I want a custom theme,but my sister won't like it )
2pj2the2best2 11 months ago
in mine that doesnt happen??? in mine its just a black screen and nothing boots, i try autoboot disks, holding reset button to load bootmii, and nothing happens, oh and I have my nand back up, what can i do?????
RageDimension 1 year ago
@RageDimension
i hate to say this. but if you had priiloader and installed a file just incorrectly, you may be screwed.
just keep trying thats all the info i have on that.
good luck!!
10Gr1fterbang 1 year ago
@10Gr1fterbang yo can i have the mym file for windows i cant find that theme on wadder? i have theme mii so i can make the mym to a csm (yes i have installed a ton of themes and have bootmii as boot2)
yofail1 8 months ago
how did u do that to your wii menu? I want to do that to my wii when i unbrick my wii(I want mario though)
TheMariowebcam 1 year ago
@TheMariowebcam
first you mod your wii than you find SAFE (converted) themes. Note: themes can brick your wii so get experienced with wii modding.customising before attempting to change your theme. use mymenuify to change your theme
10Gr1fterbang 1 year ago
@TheMariowebcam LOL I WANTED EXACTLY THE SAME THING!
ToonRiyad 8 months ago
nice video my wii is bricked by installing a csm theme if i turn on my wii the screen is all green ive not tried to unbrick it yet but i want to now how the game updates the wii my wii bricked because my wii is a 3.2e and i installed a 4.2e theme so would my wii unbrick if i follow all the steps and put new mario bros in the wii?
pakoe29 1 year ago
@pakoe29
your wii was 3.2e, mine was 3.2u.
it may not work for the different region. but if the wii is bricked anyways, you have nothing to lose. i have converted 3.2e themes to work on a 3.2u wii so that may work. if i were you, id just go for it. good luck friend.
10Gr1fterbang 1 year ago
@slyboogy27
i dont think smash bros has a new enough update within the disc. use silent hill, or new mario bros
10Gr1fterbang 1 year ago
Where Can I Get A Ps2 Controler Converter? b-cuz I cant Find a GC Controler 4 Sale
shockster456 1 year ago
NO MOD CHIP NEEDED SO STOP ASKING ABOUT THAT.
10Gr1fterbang 1 year ago
do you need a mod chip?
xRoCw 1 year ago
@xRoCw
if you had a fucking brain, you wouldnt ask that.
do i show a modchip in the video?? NO!!
10Gr1fterbang 1 year ago
by all mods, do you also mean softmod? because i paid for my wii to be softmodded and it's neogamma.
boomer999111 1 year ago
@boomer999111
yes, all here softmods
10Gr1fterbang 1 year ago
When my wii was functional I enabled an update blocker, may that cause this method to not work?
Freddan50 1 year ago
@Freddan50
i imagine that it could cause probs some how, but if all else fail, try a newer game to update the wii with
10Gr1fterbang 1 year ago
@10Gr1fterbang I've solved it now with priiloader. I think it dont work for all firmwares, I have 4.1E
Freddan50 1 year ago
Comment removed
Sonicadvaned09 1 year ago
It doesn't work.
lol i paid $4.99 + s&h and $45 for carnival games.
Which i couldn't find a used copy so no i cant return it XD
my wii is 4.2u full brick, bricked it by trying to get dark wii 3
TheSgtHell 1 year ago
@TheSgtHell because carnival games doesnt have the 4.3 update
nissengummihone 1 year ago
@nissengummihone Now they tell me? -_-* I Should of paid $10 more then to have been a tight ass to get meteroid prime or what ever its called. Will The new black ops game work? Im going to find a way to sell carnival games to get my money back.
TheSgtHell 1 year ago
@detroid89
thats not my fault that it didn't work. this only works with wiis made for the usa.
10Gr1fterbang 1 year ago
can this work for those who have no preloader or anything?
detroid89 1 year ago
@detroid89
yes. and that is the exact reason that i made this video
10Gr1fterbang 1 year ago
ok but i have now a semi brick and i dont know waht i must now do
nfojoshi 1 year ago
but waht is when you no preloader have i have no preloader
nfojoshi 1 year ago
@nfojoshi i didnt have preloader either the screen will go black after awile if that disk dosntwork start all over with a diff disk
trapedinmymind 1 year ago
I get the number in the corner I put the game in but now it just stays a black screen I noticed ididnt have my ethernet cord plugged in the first time crap..... i might of just blew a big chance any ideas? it loads jsut black screen now no menu
JarrodDrover123 1 year ago
@JarrodDrover123 i did the same thing with the dark theme its a biznatch um what version u on cuz when i did it i push the gc control buttons then 3.4u came up then i inserted netflix cd waited about 2 mins and boom wii back to normal like brand new only still had the hacks like homebrew working and everyting still on there
trapedinmymind 1 year ago
@trapedinmymind Well i did that and 3.1U came up so i stuck in like resident evil darkside chronicles nuthing happend after 15 minutes now whnever i turn my wii off and on it stays black and i cant get the numbers in the corner to come up with a gamecube controller i have turned it off and on about 20 times to a black screen now without any frozen dark theme wii menu any ideas?
JarrodDrover123 1 year ago
@JarrodDrover123 just keep trying the gc thing make sure u push the bottons really hard idk make sure ur using a disk thats new i tried about 4 disks till i remembered i just got netflix and boom poped it in everything went back to normal so idk just keep trying im not a great hacker but this worked for me just keep try;ing
trapedinmymind 1 year ago
@trapedinmymind ok i will try the gamecube controller it wont appear after the very first time i did it and now it only boots with a black screen I think im screwed :(
JarrodDrover123 1 year ago
dude do i need a mod chip to do all this? i downloaded the dark wii theme messed my wii up im gonna try the gamecube thing but i dont got a mod chip.
JarrodDrover123 1 year ago
i fixed mine 3.4u with the game cube controll worked perfect used a netflix cd to update it to 4.1u everything work still had homebrew andeverything
trapedinmymind 1 year ago
@trapedinmymind how do you no if it works when the numbers come up and you stick a new game in or in your case net flix cd does it load straight to homebrew channel or what? if you could help me out would be appreciated I need to buy a screw driver to open up my gamecube controller tomorrow.
JarrodDrover123 1 year ago
okie so i bricked someone elses wii my dad just bought it yesterday from somone else its 3.4u idk how the moded it but i put the dark theme on it and reset itand now its just stuck on the dark theme screen before u even get to the menu i did the control it worked got 3.4u on bottom but in animal crossing and nothing happened and i put in another game and wait 15 mins still nothing is it the game or the wii idk what to do its a lu5
trapedinmymind 1 year ago
@trapedinmymind same problem man and im 3.1 im going to try the gamecube controller trick to tell em if you get it fixed and let me no how you did it.
JarrodDrover123 1 year ago
okie so i bricked someone elses wii my dad just bought it yesterday from somone else its 3.4u idk how the moded it but i put the dark theme on it and reset itand now its just stuck on the dark theme screen before u even get to the menu i did the control it worked got 3.4u on bottom but in animal crossing and nothing happened and i put in another game and wait 15 mins still nothing is it the game or the wii idk what to do its a lu5
trapedinmymind 1 year ago
I get the fw on the lower right corner but what do you do after that. I put the disc in then it reads for a mintute or so then stops. What do I next??? Plz need advice
trouble9816 1 year ago
@trouble9816
what fw are you, and what game are you using? hopefully you have a game that has a newer fw/update than your wiis fw. it will than take 5 minutes or so. but unfortunatly all wiis are different, there is no gaurantee that this will work the same for different wiis.
10Gr1fterbang 1 year ago
@10Gr1fterbang Well its 4.1 and I have try putting in Mario Galaxy and tried the new sin and punishment 2.
trouble9816 1 year ago
@10Gr1fterbang Its like the disc boots but then stops.
trouble9816 1 year ago
@trouble9816
that disk does not have the proper update for that situation. just keep trying newer games until one works.
10Gr1fterbang 1 year ago
Hey I have a wii 4.1u that's bricked I install the darkwii theme on it and everytime I boot it up and click A it freezes plzz help me is there a way to get priloader on it but I can't accses my wii.... PLZZZ Help Me
allsystemhackingzone 1 year ago
@allsystemhackingzone
I am 99.9% sure beyond the shadow of a dout that you can't put priiloader on there if you havn't already. the only thing to do in this situation is to get a gamecube controller, and do that trick i show in this video. otherwise keep looking for vids on that situation..by all means, there is hope.
10Gr1fterbang 1 year ago
@allsystemhackingzone dude have you fix your wii yet? i got the same problem you did tell me how you fixed it if u did.
JarrodDrover123 1 year ago
Will this work no matter what?
I think I have a full brick wii, like unfix-able.
TomKStones 1 year ago
Will this work no matter what?
I think I have a full brick wii, like unfix-able.
TomKStones 1 year ago
Will this work no matter what?
I think I have a full brick wii, like unfix-able.
TomKStones 1 year ago
thx
Kirbyrules1000 1 year ago
same Question 4.2U?
StudioSh4rk08 1 year ago
will this work on 4.2U????????????
Kirbyrules1000 1 year ago
@Kirbyrules1000
by all means, it should. just make sure you press those buttons down hard enough (thats what everyone has the most probs with)
10Gr1fterbang 1 year ago
How should the screen look when i insert a newerish game??? im just getting a black screen and my wii is blinking the blue light....
JVK011 1 year ago
@JVK011
that sounds like an ios249 (it could be). just make sure you have a newer game and you are pressing down all of the directionals on your gc controller while the wii boots. but all wiis are different unfortunatly.
10Gr1fterbang 1 year ago
My system files were corrupt at one points, i just turned off my wii and loaded up preloader and installed HBC again
Keontae0756 1 year ago
@Keontae0756
than you got lucky, good! just remember (and this goes for everyone else too) you all have to put priiloader back on there asap if you downgrade. downgrading whipes out priiloader!!
i just thought that might be useful.
10Gr1fterbang 1 year ago
My Wii is NOT modded and has no hacks whatsoever. What can I do to get past the "4.2 (USA)" screen so that I can go back to playing games as normal?
cantstanja 1 year ago
@cantstanja
as shown in my video, you will need to get to that screen an then put in a newer game that goes. BUT, whats different in your case is that you have 4.2u usa, you will need to wait untill a game comes out that has the 4.3u update. (4.3u update may or may not happen, i dont know 4sure). or place a newer game with an update into your wii after seeing that screen.
10Gr1fterbang 1 year ago
UPDATE
one after another stupid fuckung questions. im getting tired of it. if you have a moronic question, i will not respond. GOT IT??
10Gr1fterbang 1 year ago
does your wii have to be modded? becuz my is soft modded. i dont have wiikey and stuff.
mohammedrun 1 year ago
@mohammedrun
it doesnt matter if its modded or not. nore do you need a wiikey. this strategy works on most wiis, but not all.
10Gr1fterbang 1 year ago
@10Gr1fterbang thanks. im going to borrow New super mario bros wii tomorrow from a friend. and by the way, do u know where u bough the converter for the ps1 controller?
mohammedrun 1 year ago
@mohammedrun
i was lucky 7 years ago i baught the converter from a local store like walmart/target for 20 bucks new.
but the only place of know of to buy them nowa days is ebay. they'll run you about 6-20 bucks. pluss shipping.
10Gr1fterbang 1 year ago
@10Gr1fterbang do you know how to mod the gamecube controller so that i can press d pad all at once?
mohammedrun 1 year ago
@mohammedrun
press the 4 bottons. how hard can that be? god you people, you're either plain dumb as rocks, or you're trying to piss me off. fuck off bitch
10Gr1fterbang 1 year ago
@10Gr1fterbang 0.o sorry.
mohammedrun 1 year ago
Your gonna break the damn controller! Plus thats a PS1 controller..
Dragzilla66 1 year ago
@Dragzilla66
no the controller is fine lol, i have fixed many wiis with it and i still play street fighter with it!. and its a ps1 controller with a converter to connect to a xbox or gamecube.
lol but omg thats the brightest comment ever lol
lol
10Gr1fterbang 1 year ago
Sorry I was high writing that! XD
So does a gamestop gamecube controller work?
Dragzilla66 1 year ago
Gr1fterbang ill send u a video i made of what my wii looks like ok i made a new one ok ... please send me the preloader files and all the files u used to unbrick your wii please cause i know u have worked it before ill be video taping what i did and then ill put it on youtube for u to see ok so please send me the files u used ASAP. Is there a sequence of how to press the buttons on the GC pad
RobotMario1 1 year ago
Gr1fterbang ill send u a video i made of what my wii looks like ok i made a new one ok ... please send me the preloader files and all the files u used to unbrick your wii please cause i know u have worked it before ill be video taping what i did and then ill put it on youtube for u to see ok so please send me the files u used ASAP. Is there a sequence of how to press the buttons on the GC pad
RobotMario1 1 year ago
Watch my newest video that if uploaded if its not uploaded that means its currently uploading to youtube and u'll see the whole story
RobotMario1 1 year ago
will a wireless GC controller work???
pigpal2 1 year ago
i just wanna know something if i have the 4.2 a need to downgrade cause i have the brick but i cant unbrick it =( please help me
ZcOoOtt 1 year ago
did the same as you did to brick it ;( I got a new Wii yesterday and it have already happend to me. So im wondering if i can access the fw version down the corner without preloader installed? I got fw 4.0E
Spartilo 1 year ago
@Spartilo
correct, you can your fw without priiloader installed. even without priiloader installed.
simply do the steps i show and use a gc controller pressing all 4 buttons on boot.
10Gr1fterbang 1 year ago
@10Gr1fterbang oley but when i have got the fw? What should i do nxt??
Spartilo 1 year ago
@10Gr1fterbang okey but when i have got the fw? What should i do nxt?? And does my gc controller need to be "customized"?
Spartilo 1 year ago
@10Gr1fterbang Okey, but does my GC controller need to be disambled to push the pad? Or can it be as it is now? And what disc do i need to make it fix? What disc did you use to unbrick your Wii and to make it fixed?
Spartilo 1 year ago
@10Gr1fterbang ok since your the big smarty around here ... i need help to unbrick my wii as u already know but its way different than u think i updated my firmware through a file i didnt even know of thinking it was to update to wii version 4.1 but it was some stupid bricking file ... so whats the sequense of how im suppost to press the buttons whats the link i have to have to download the universal unbricking files and how am i suppost to do UNBRICK a Fully Bricked wii
RobotMario1 1 year ago
@10Gr1fterbang i updated my firmware to 4.1 not knowing what type of region it was from it said returning to wii menu then i get a black screen can u help me and i need a download link for Universal Unbricking disk. unless u know how to help me another way but i would really like to know the sequence of how u pressed those buttons down instead of a PS1 controller ... i dought a PS3 controller would do any good i have a GC controller anyway (JUST A BLACK SCREEN NO WORDS ON IT NO NOTHING)
RobotMario1 1 year ago
@RobotMario1
this video may help you, but is not a 100% success for all wii errors.. i have seen a case where a wii was toggled in a black screen error and i could not retrieve it with this method. luckily i was able to undo what i did as i uninstaled a file that caused my prob. i had a converter thing for the ps1 controller, and no a ps3 controller wont work. you need to use a gc controller, hold all 4 buttons as you turn on the wii and hold them untill you see your fw on the lower right
10Gr1fterbang 1 year ago
@10Gr1fterbang can u send me those files u have on your SD card that u have so that i can do it just the way u did please ... i have already taken apart my GC controler and almost lost all the buttons but didnt anyway ... can u send me those files for preloader cause i dont have preloader installed on my Wii. i dont think... ill make a video of what my wii looks like and stuff so check it out the first time i tried uploading it was success but somehow failed anyway ill get it on youtube
RobotMario1 1 year ago
@Spartilo
clamp those 4 buttons as hard as possible to be sure. and then update with new mario bros, or silent hill shattered memories. or any other newer game you can get a hold of.
10Gr1fterbang 1 year ago
@10Gr1fterbang Can i use Super Mario Galaxy or Super Paper Mario as a disc? Or does the game have to be newer than the firmware?
Spartilo 1 year ago
@10Gr1fterbang Hello tried it today with my brothers GC controller and it dont work :(
It is not customised/modified on anyway and the error is showing anyways and i am pressing the pad manually. But what pad is it to press? :)
I am new to dat, could u please do a same tutorial but with a GC controller? And what firmware/recovery disks do i need? Universal Unbrick Disc v2 or what ??
Spartilo 1 year ago
hello..just a quick question about my wii, yesterday it was running fine on firmware 4.2e pal console softmodded ,homebrew,,,,neogammer,,,,,,,,usbloader ,i tried to install a nes wad and after re-booting im only getting a black screen and the wii remote is not synced anymore ??????????dont know what kind ov brick iv got or if maybe this method will work for me,,,,,thanx to anyone who responds in advance
jamezee69 1 year ago
@jamezee69
thats not exactly a brick. but more so just an error. i reffer to that as the "ios249 bug"
i recomend "any title deleter" to fix it. use it and delete ios249
10Gr1fterbang 1 year ago
@10Gr1fterbang thanx alot for the info , am gonna get right on the case now ,thanx again.,,,,:)
jamezee69 1 year ago
@10Gr1fterbang that sounds better 4 me ,,,"BUT" how do i get any title deleter to respond with me only getting a black screen and the wii remote not syncing to the console , iv just got myself a gc controller today and dont get a responce from port 4 ,what do you think,,,,,,,,,,?????hmmmmmmmm
jamezee69 1 year ago
@jamezee69 i got the same problem just a FIRMWARE BRICK i need someone to help me unbrick my wii do u know how.
RobotMario1 1 year ago
Alright I have a question, I tried to put homebrew channel on my wii and I pulled out the card and now my power button is completely black even if I plug the wii back in. and I can't even turn on my wii. what do I do?
TRXProductionsX 1 year ago
@TRXProductionsX
thats beyond wii modding. it sounds like general wii hardware failure. if all else fails send it in to nintendo for a refund.
10Gr1fterbang 1 year ago
this actually worked!!!!
I had a bad System Menu because of my Menuify and i was on 3.4U
I did what this guy said and put in NSMB Wii and my Wii was no longer bricked
although it did change the Version to a 4.1U
darkwolf9877 1 year ago
@darkwolf9877
that is true. it update to the next fw. and thank you, im glad this vid worked 4 ya.
10Gr1fterbang 1 year ago
i have a black screen
and i have preloader installed
bricked my wii 3 times
and unbricked it
now i got the black screen brick
i cant access preloader anymore
i dont have a gc controler will a wii remote work instead
PLS HELP!!!!!!!!!!!!!!!!!!!!!!!
noelshibu 1 year ago
remeber its just black
ipodtouch733 1 year ago
ok when i turn it on with no cd in it makes the noise like im trying to put one in it and nothing comes up at all. the tv makes a white flash for a sec but thats all.
ipodtouch733 1 year ago
deos it work for fully bricked wii's plz i need help
ipodtouch733 1 year ago
telll me exactly what your wii does when you turn it on. i may be able to help.
10Gr1fterbang 1 year ago
i was try to update so i could play my game. i forgot tht i wasnt supposed to it was 3.3u
ipodtouch733 1 year ago
can i use burned autoboot game discs for it? i don't have a modchip or a newer game ;s
gz478 1 year ago
i can reach the Rescue Menu but when i put a game its just spinning and spinning , i waited a hour once , should i wait longer??
LimhErL 1 year ago
no it depends on the game you tried, and wii and the firmware you had when you bricked.
try new mario bros, punch out, silent hill ect.
you may have to wait for a game that has a newer update that you need. but there IS hope because you saw the rescue menu!! what was your wiis firmware?
10Gr1fterbang 1 year ago
@10Gr1fterbang my firmware is 4.1!! :P
and i have tried New super mario bros wii but the disc is spinning but nothing happens..
but i can acess the rescue menu ^^
LimhErL 1 year ago
in that case. i recommend rent silent hill shattered memories. as i have seen that work on a 4.1 with my own eyes. and becuase you have gotten the rescue menu to show up.
remember, get that menu to show up, than pop in silent hill shattered memories.
that should work
10Gr1fterbang 1 year ago
@10Gr1fterbang so should i buy that game?
is it worth the money? isn't better to get a drivekey for 70$ so i can play burned games??
LimhErL 1 year ago
Hey I have another question. If I update my wii the first time and then try to download the homebrew channel will my wii brick? And if it doesn't brick will it still download the channel?
paintballboy255 1 year ago
it should not brick.
and if you are 4.2 fw or lower, it should download the channel. (granted that you can get past the "no vulnerable ios found") <-- i have a vid on that
but this depends on what fw your wii is and what modding step you're on
10Gr1fterbang 1 year ago
yea but i already performed the update so the homebrew channel will stil download? or not
paintballboy255 1 year ago
what if i dont have the controller but a gamecube controller what do i do
paintballboy255 1 year ago
gamecube controllers work the same as displayed in this video. (i have also tried a gamecube controller).
clamp 4 directionals with clamp that will make (so you dont have to take apart your wii), than put in 4th player slot turn on wii. hold down buttons hard enough
10Gr1fterbang 1 year ago
i have seem more than 3 different bricks, the one in this video, black screen, menu freeze. ALL of what i ran into was curable. on 3.2u and 4.1u. (wii in this video is a 3.2u)
but depending on your firmware. is it 4.2u or higher? that may be why.
whats your firmware?
but no matter what, keep the wii and keep trying to clamp the buttons down, and do it HARD. or you may have to take the gc controller apart and press and hold all 4 bottons as you turn the wii on
10Gr1fterbang 1 year ago
I Don't have Priiloader installed, I don't get the "system files are corrupted" message and when I try using the D-pad fix, get nothing. am I screwed?
Co0lFlame 1 year ago
you have to break the controller open to press all of the buttons under the d-pad
21MegaYoshi 1 year ago