How To: Install Off-Road Lights - (HD)

[shelbykinggt500]

Are you guy from mass I live in NH and your plates looked like mass plates

[x19silverado90x]

lol this is honestly the worst video i have ever watched... you guys have no idea what anything is :p "they got this nice rubber thing here to stop it from movin around and bouncing:p" its called a rubber grommet :) but nice job guys!!

[Sexymanye419]

did you drill a hole in the brush guard to hold the lights in?

[ePlumbz1255]

I have a 1995 Jeep Cherokee. I bought a set of Navigator NV-120 auxiliary lights. I know they aren't the greatest but they will do for my needs. Anyway. I did not get a relay with them. Do i need one to install them? If so, where can i get one?

[nordfjellBrandt]

... a nice rubber THING right here and the light has a nice SHINYNESS to it... and here's the OTHER one.

[nordfjellBrandt]

The tutorial was mediocre, the "music" was worthless and UNBELIEVABLY goddamned LOUD!

[Dtw125]

where did u get that brush guard for tha bronco and how much was it?

[tjturtle15]

horribe how to video

[thecrazymotorhead]

thanks for the help ill soon be installing those on my 92 ranger first i need the brusher gaurd thoe

[xXShadowRejectsXx]

00:38 omg dude i did that in my silverado the other day but i accidentally drove OVER them and almost shit my pants

[a1a2italy]

can you post a video of how the bush guard is installed on the bronco so i can physically see how its on cuz i think that truck will have the same set up as my truck i dont know how to get around my crome bumper i dont want to cut big holes in it and i have a 92 ford f350 i have a video of it if that helps just check my channel and i have no clue what bar to get or how to install thanks

[Dustin322]

so if the wire is not grounded will i die?

[5oclocktimetopray]

WHY DID YOU FILM THE UNWRAPPING OF THE LIGHTS xD

[600streetbikr]

electrical tape? soilder and shrink wrap would be better. not bad though

[letitride555]

what kind r those?

[slowride55]

why do you have to wire into the headlight wire when they have their own switch?

[arsHW]

While I do zip-tie and twist-tie my wires, I also cut, strip, and re-connect wires to make them the proper length, with enough play to re-adjust, change bulbs or what not. Electrical tape and heat shrink tubes are awesome!

[jgwentworth1500]

I bought a light and it didn't come with any extra hardware. Not too happy.

[sweefu2]

You guys are dodgy lol

[jordanfromgoosebay]

will upload a video soon about ho to install fog lights, with fuses and relays, i have 6 lights on my truck i hooked up myself

[7366DIESEL]

nice video. i hate those wire strippers. i got a ideal wire stripper now much better.

[Rorabough]

i want a roof visor!

[MrHTCEVO4g]

i noticed at 4:58 someone opens the back door so you can get out. I have a 95 ford explorer and my back doors wont open from the inside and the back doors are unlocked and the child safty lock is off can anyone help?

[AvidStudio]

@MrHTCEVO4g Maybe a future episode

[mashbid28]

my question is that how you attach the swich inside the car? do leave it hanging?

[allthegoodtimes]

where did u go through the fire wall??

[Scorch1007]

@allthegoodtimes The truck had a plow on it so there is 2 holes from where the hydrolic lines were. But you can typically find a hole somewhere to feed the wires through without having to drill holes.

[volksjager8]

I've been looking all over for a brush guard like that for my 88 Bronco, where would you get something like that?

[Scorch1007]

@volksjager8 I got the push bar at a local junkyard, I happened to spot it while I was looking for a rear bumper. But one thing to note is that it is only good for a light mount or looks sense that year bronco the front bumper flexes a lot and the push bar mounts to the bumper.

[Deke101]

This video is lacking. WHERE and HOW dow you install the relay and what does it do? Did you use any FUSES? how did you get your wire from the engine compartment to the CAB??? Did you even mount the swicth??? Come ON!

[daTERRORIZER]

Facts that would help the off highway enthusiast who installs auxiliary lights on their vehicles. @ 2:20-2:28, here in the state of CA, at least, off road light covers are required by law while driving on a pubic highway as defined in section #24411 of the California Vehicle Code but only if the lights are mounted above 42".

Informative video I must add, good job on the editing too, I like.

[GuitarKid905]

were in the rocky mountains are you guys, im in denver

[TheXJthatCould]

im putting 4 daylighters on my cherokee xj, just made a safari rack for it its gonna be badass.

[Bitzer0624]

@TheXJthatCould cherokee=xj not cherokee xj, you could say jeep cherokee or jeep xj but cherokee xj is re dundant. Go joing cherokeeforum . com learn something and just know racks and roof lights are over rated.

Sincerely, An XJaholic

[TheXJthatCould]

@Bitzer0624 troll...

[yoyofanatic]

I wish that they had tractor supply in Arizona

[992bm]

hey im ordering two of these kits. therfor four lights to put on the backrack of my f150. i want all four to come on with once switch. can i just tap the other two into one of the kits harness

[raymundolundo]

helped a lot. i'm totally subscribing :)

[Mijaycapri79]

Will This work for Navigator NV-360W lights?

[youdragon]

ok i have 1 final Q im putting 3 100watt light on my rollbar and i only have a 10amp switch will that be enough???

[nothadnotbad]

this could almost be a pro show if you tried

[johz65]

im in the process of doing my own weekend wireing job on my bronco. not so simple but those looked good. im putting 2 daylighters and 2 150w floods on a roof rack. looks bad ass. nice job on yours though. keep 4X4'in

[youdragon]

where did u get those lights???? my local autozone is haveing a hell of a time trying to get them

[WeekendMechanic]

@youdragon You can go to any Pep Boys, Advance Auto Parts or maybe try another Autozone to get them. You can also find many places to by them off the internet.

[KingOfTheClutch]

@WeekendMechanic JCW.com

[SuperAUTOcar]

@youdragon go to pep boys for them thats where I got mine.

[99DDrake]

@youdragon You can buy them from Advanced Auto Parts, or Ebay.

[youdragon]

If i put 2 KC 130Watt daylighters on my 97 serria will i need a bigger alt to run them???

[KINGJB3100]

@youdragon I run two 100 watt KCs on my Jeep without a problem.

[youdragon]

how much was it for those lights and where did u get them?

[youdragon]

ok im trying to buy a pair of these lights for my roll bar, what do u guys think of them? need some input incase they suck lol

[HeinousBFG11]

2:45 josh said,"feed it through the whore.....lol haha

[iheartmyrappy]

@HeinousBFG11 "And them come up through the bottom end" lmfao

[kiteLe06]

How dangerous is it to wire fog lights direct to the battery without a relay, what are the chances of a fire?

[KINGJB3100]

@kiteLe06

it depends on if you will be using the lights all the tome or ocasionlly. Since these were wired through the head lights they are already through a relay.

[DrEwBaBy625]

i think what they did is used the 12v from the headlights then put that through the switch which turned the relay on that way you cant leave the off road lights on on accident and the line going directly to the battery was for the relay. and i wouldn't just twist wires together either thats just a problem waiting to happen, maybe thats the plan next week there going to show us how to trouble shoot and repair bad wiring

[youdragon]

im about to buy a set of Optilux 1900 for a rollbar what is your opinion about them for a true off road use??

[KINGJB3100]

@youdragon

I like the hella 500 series better because they are slimmer, but either will work.

[youdragon]

i just bought hella 500 serries lights would them be a good off road light for my roll bar???????

[KINGJB3100]

@youdragon

they will work great.

[61vyper]

Wow, Those wire should have been soldered and heat shrink applied, And run thru a separate relay. imho

[WeekendMechanic]

@61vyper

The owner wanted it that way, soldering would be a better way to hook up the lights.

[TommyChevyBugle]

@61vyper no they dont have to , if u use wire taps

[ninemili22]

You seriously just spliced those right into the headlights? LOL

[KINGJB3100]

@ninemili22 Yeah, Not what I would have done, but the owner wanted it that way.

[Scorch1007]

@ninemili22 We used a relay

[RacerE7773]

Nice (and Expensive) lights.

[dave451pr]

pretty good instructional guys. Question, when you buy the lights to they come with their own manual?

[WeekendMechanic]

Yes, I would think that almost every type of brand lights you by that are new in the box would come with their own manual on how to install them.

[arsHW]

@WeekendMechanic:

I actually bought some KC Slimlites recently that came with a blank peice of paper. I guess they wanted me to explain how I did mine. Lol!

[KINGJB3100]

@bobsaggotdog

i'll eat your children

[musclecarfreek04]

@bobsaggotdog ur a fag....

[MurphyisDaCaptain]

Cool video i want some extra offroad lights for my truck but i dont know if i want a spotlight fog light or driving light? what should i get.. oh and i subscribed:D

[WeekendMechanic]

If the lights were going on a brush guard, then off-road lights or driving lights. You could go with fog lights if you don't have them already. It depens on what you will probably use the most.

[Scorch1007]

editing was superb! 5* :D

[WeekendMechanic]

Thanks!