umarex sa177 field strip

[DARKRIMASTER9000]

@TheNagchampa17 oh no, its actually the piece that twists the co2 powerlet into place.

[animeswordsgirl]

Does this feild strip like the umerex combat tactical force glock?

[JUKEBOXX1990]

@animeswordsgirl dont know..never had that gun

[TheNagchampa17]

@JUKEBOXX1990 i think i can hear a bb pellet inside the gun im going to try using this video to see if i can get it out, do you think it will work?

[JUKEBOXX1990]

@TheNagchampa17 its most likely not a bb pellet..ite mostly likely just a lever you are hearing moving p and down..

[cod5gta4halo3cod4]

i meen wait

[cod5gta4halo3cod4]

how long do u think i should what to take it apart and grease the barral

[JUKEBOXX1990]

@cod5gta4halo3cod4 i did it after 1000 rounds..you dont need to clean airguns often

[cod5gta4halo3cod4]

@JUKEBOXX1990 what kind of grease would u recomend on the wedsite it didnt have an umarex cleanig kit just daisey and gamo

[JUKEBOXX1990]

@cod5gta4halo3cod4 just get either daisy or gamo kit and you will be good

[cod5gta4halo3cod4]

@JUKEBOXX1990 thank u

[Durandal999]

So I can change the spring to a better one to make the slide movie heavier?

[JUKEBOXX1990]

@Durandal999 yea you could

[Durandal999]

@JUKEBOXX1990 Thanks bro, this heped me a lot

[AirShooter2012]

Looking for any info on modifying the trigger pull on the SA177.

[JUKEBOXX1990]

@AirShooter2012 i really dont think you cant.and if you trian with it..you can hit a tall pole at 50 yards with this gun if you aim high

[CrowPollock]

Nice to know it can be taken apart. Thanks for the vid!

[JUKEBOXX1990]

@CrowPollock your welcome..

[MDM781]

is there any way to shoot pellets, even if individually loaded?

[JUKEBOXX1990]

@MDM781 nope no way..and dont try it you could really hurt your self and break the gun

[emattd57]

Hey umm were can you buy attachments for the under rail, it would be helpfull if you can message my acount bak thanx

[JUKEBOXX1990]

@emattd57 check out amazon. com or pyramydair . com

[MrBBman98]

hey, wondering if i should get this or the GSG 92, anybody got any advise? 

[JUKEBOXX1990]

@MrBBman98 well this one is cheaper..and the gsg 92 has a stronger blowback..but less fps..it all depends on what you like more..this was my first c02 pistol and it still works great.i can even hit light poles up to 60 yards if i shoot at the right angle

[Nero619ful]

@ JUKEBOXX1990 ok thanks for all your help. I am subscribing to you and looking forward to your new videos.

[Nero619ful]

@ JUKEBOXX1990 well I actualy have the green peice. It is just ripped. Were does it go?

[Nero619ful]

@ JUKEBOXX1990 Yes the slide moves back and forth freely. It just does nothing when i pull the trigger.

[Nero619ful]

@ JUKEBOXX1990 yes the slide is all the way at the top. It is were it is supose to be. Thanks so much for your help btw. Do you have any idea what to do

[JUKEBOXX1990]

@Nero619ful can you move it back and fourth??just release the little lever on the left side..push it down

[JUKEBOXX1990]

@Nero619ful o i see ..so yea you need that lil green thing..thats what make it blowback..try to contact the people you bought it from.and maybe they will give you another one

[JUKEBOXX1990]

@Nero619ful how did it rip..did you touch it?? it goes in the back of the slide..you probably hove to get it repaired by someone but it will cost a lot..i dont know how to fix that..just buy a new one..its about 60 bucks on amazon . com

[Nero619ful]

@ JUKEBOXX1990 well you know when it locks into place when its out of ammo? It shoots like that but the slide is up at the top it just wont move back and forth. So basically it is shooting without the blow back action. In side that green circle part fell out. I dont think its needed but idk. Thanks

[JUKEBOXX1990]

@Nero619ful sounds like you need a new slide..how did that happen..if you can make a video i would be able to understand better..can you release the slide lock??

[JUKEBOXX1990]

@JUKEBOXX1990 your welcome man..i got some sa 177 vids on my playlist..check em if you want

[Nero619ful]

Hello why wont my slide slide foward? Thanks

[JUKEBOXX1990]

@Nero619ful well i need more details??its a lil hard at first try to oil it up a lil bit..remember it goes forward at an angle..

[olfixjmm]

those things you called L wrenches are Allen keys or Hex wrenches. good video.

[JUKEBOXX1990]

@olfixjmm hey thanks i remember what they are called now

[GlaBurnzUrHouseAK47]

what oil did you use?

[JUKEBOXX1990]

@GlaBurnzUrHouseAK47 the oil in the back round is rem oil you can buy at walmart..

[warmaster5128]

were you get that

[JUKEBOXX1990]

@warmaster5128 on a m a z o n .com or py r mydair .com

[Dstezzey510]

why doesnt the thing poke out on mine? it seems glued on

[JUKEBOXX1990]

@Dstezzey510 push it harder or you might be doing it on the wrong side

[BobioRules]

Oh my god I have mine in the same case!

[JUKEBOXX1990]

@BobioRules lol yea i got my case from am a z o n..

[BaseSlider71]

you should take the black finish off the slide and make it silver

[JUKEBOXX1990]

@BaseSlider71 thought about it but decided not to..have you done it

[BaseSlider71]

@JUKEBOXX1990 NO but i have a bb gun that is magazine fed and took the black finish off the magazine, it is beast. I think you should do it it

[JUKEBOXX1990]

@BaseSlider71 you should make a video of it

[BaseSlider71]

@JUKEBOXX1990 I dont have the proper equipment you should make a video :D

[JUKEBOXX1990]

@JUKEBOXX1990 what u dont have a camera or something.. maybe i will make a video but for now i don't wanna have a stainless finish.mabye ill do the ejection port if anything

[JUKEBOXX1990]

yay 1000 viewssssssss

[jmparag]

Have you noticed a rattling noise on your gun. If you shake it there is an annoying sound that it makes and its not from the screw down tab. Pleas let me know if you can offer any advice.

[JUKEBOXX1990]

@jmparag yes i notice it..theres like this little tab where you take the pin out to field strip it..and thats what makes the noise..i dont have my sa177 right now but when i get it back ill look more into it..but im sure that tab is for the pin to field strip it..

[jmparag]

@JUKEBOXX1990 Thanks.

[JUKEBOXX1990]

@jmparag hey i got my sa 1771 back and yea its the tab where the slide dis assembly pin goes.cant really do anything about it

[jmparag]

@JUKEBOXX1990 Thanks for taking the time to look at it.

[JUKEBOXX1990]

just wanna say thank you guys for the 300 views

[JUKEBOXX1990]

@JUKEBOXX1990 wow thanks for the 500 views and thanks to TypicalB18 for telling me to make a vid on the field strip

[GLOCK23]

I wrapped the black plastic piece that the green plug is attached to with metal tape until it was about the same width as the green plug. This allows the green plug to not be loose and to not let air escape so that more of the air is used for the blowback.

[JUKEBOXX1990]

@GLOCK23 sounds interesting..you should make a vid on it..how much storonger is the block back now compared to the hpp

[GLOCK23]

@JUKEBOXX1990 The blowback still isn't stronger than the HPP but it is a lot stronger than it was before. I never uploaded a video on youtube. I'll give it a try later in the week when i have more time

[GLOCK23]

Any ideas on how to make the blowback stronger? Compared to the HPP, my SA177 blowback is slower and weaker

[JUKEBOXX1990]

@GLOCK23 yea you could pull the spring to make it longer giving it more blowback. i did this and it felt stronger but it can damage the spring which it did to mine so i stop doing it..the sa177 just doesnt have a strong blowback for some reason..

[GLOCK23]

@JUKEBOXX1990 yah i just took both guns apart and noticed that the slide from the SA177 is much heavier than the slide from the HPP. I think thats the reason why the blow back is slower and weaker.

[JUKEBOXX1990]

@GLOCK23 thats kool..did my vid help you take the sa177 apart

[GLOCK23]

@JUKEBOXX1990 yes it did. Great vid BTW. I swapped springs to a stiffer one and now the blowback is nice and crisp but the slide doesnt slide back all the way so it doesnt lock back after the last BB is fired. Going to have to do some tweaks to get it just right

[JUKEBOXX1990]

@GLOCK23 alright man..good luck with the spring mod..if it goes well you should post a vid on it

[GLOCK23]

@JUKEBOXX1990 i figured it out, its not the spring that needed to be changed but the plug at the rear of the slide. after shooting so many rounds, the green plug wore out a bit, i modified that piece and now the blowback is alot better now

[JUKEBOXX1990]

@GLOCK23 o yea i know what your talking about..what did you do to it..since i myself have shot over 5000 bbs

[JUKEBOXX1990]

THANKS FOR THE 200 VEIWS GUYS..NEED HELP STILL COMMENT ME

[NawfyBeatz]

@JUKEBOXX1990 Found it. Thanks!

[NawfyBeatz]

Is that a laser? If so, can I have the make and model number plz.

[JUKEBOXX1990]

@NawfyBeatz yea it is..i got it off a m a z o n . c o m..i dont remember the name but you can search this..Red Laser Sight with Weaver Mount/Black

[daniehinmontreal]

hey im doing everything perfectly but when im puling my slide back then i want to lift...it dosent lift up please help

[JUKEBOXX1990]

@daniehinmontreal well since this is your first time taking it off.its going to be a lil stiff.i suggest to try and pull back and lift at same time a lil harder..it wont break but do be careful

[TypicalB18]

Nice Job! Keep it up!

[JUKEBOXX1990]

@TypicalB18 for sure thanks..you should take yours apart now..lol

[TypicalB18]

@JUKEBOXX1990 Haha yeah I will soon!

[henry0798]

@JUKEBOXX1990 is this on all sa177 models? from any place? because no one else noticed the bolt haha

[JUKEBOXX1990]

@henry0798 well if that bolt is there im sure this will work..what company makes your gun??is it umarex??