they say its one of the best for top speed, I just had a recent accident i dont know how it happened but a piece of my pin that holds piston rod to the shaft broke and really messed up my cylinder. (Alukit)
otherwise this cylinder pumped strong over 1000 miles. i just bought a new one to replace it.
take a look moped army for help on which to choose.
I'm looking into a moped and I have a question that i can't find anywhere online. On this moped. theres a big open space between the frame and the fuel tank(?). I'm looking for the name of the part that goes over that so there is no hole and is looks more like a streetbike.
there are plastic covers that you can get for the tomos targa that cover up that hole. i personally didnt like them. i think i only have one side too. what i did was lower the tank about 2 inches and removed the oil injector. it dropped the look and is more sleek now. i should post a new video someday
well i dont know much about it but i would take a look at the sachs Madass.. it comes in two versions and is a pretty nice ride comparing to the tomos too. both are good. i guess it depends on how much your laying down for it
Hey alvexx07, I just ordered a dellorto phbg from treatland and am excited for it to arrive. I see on your carb the throttle cable, the fuel line and a third black cable/line heading towards the rear of the bike. What is that third black line heading towards the rear?
thats the brake cable. i dont have anything else running back there. I need to do an update on this, well bike is currently under construction from my recent Colorado trip but its getting a make over. :)
also what the third cable might have been was the oil injector running straight into the carb. but i removed it now. .
Bro that intake is badass, id actually buy one from you if you would make another one up. I've got the 16mm dellorto on my 70cc w the treats hi comp head and ive been lookin for a decent intake.
thanks man. Problem was i used some metal pipe from Home depot which i dont think was really good for welding. Lots of little tacks and beading, sometimes blasting through. So i wish i found better material but could not find anything. Afterwards i sealed all the smaller cracks with JB weld. It was my first time making a pipe. if i was to make another i would search for a better tube metal and somehow make it a little shorter.
I looked everywhere for something and couldnt find jack! had to make my own. even the rubber boot to fit it together was from some Radiator Hose i bought from Autozone that was 19mm. I wish i could make you one but i dont have much time. Picked up a gokart so work has been shifted. This moped is just about complete! :D
So recent updates are tecno Estroil pipe and shortened the space between the carb and manifold. im jetting at 96 main.
Current speed 46mph GSP tested.
im adding a 20 tooth sprocket in the back and 28 in the front. (grinding required) also need to retard the timing so im not burning as hot. with the changes i should be going 53-55mph.
it doesnt run very smooth when running idle
PitbullNL 2 weeks ago
what handle bars are those? stock turned upside down?? is it tough to do if thats the case haha
TheSweetLeech 5 months ago
@TheSweetLeech
Yeah man its a really easy mod. just flip and invert. put on all the stuff again and ride. just your turning radius is reduced. but its ok. ;)
Alvexx07 5 months ago
@TheSweetLeech sweeeeeet thanks a ton man
TheSweetLeech 5 months ago
i was considering buying a 70cc airsal kit..... did you have any problems with it blowing up i am worried
NoModzJustSkillz 5 months ago
@NoModzJustSkillz
they say its one of the best for top speed, I just had a recent accident i dont know how it happened but a piece of my pin that holds piston rod to the shaft broke and really messed up my cylinder. (Alukit)
otherwise this cylinder pumped strong over 1000 miles. i just bought a new one to replace it.
take a look moped army for help on which to choose.
Alvexx07 5 months ago
I'm looking into a moped and I have a question that i can't find anywhere online. On this moped. theres a big open space between the frame and the fuel tank(?). I'm looking for the name of the part that goes over that so there is no hole and is looks more like a streetbike.
JustKillinItProduct 5 months ago
@JustKillinItProduct
there are plastic covers that you can get for the tomos targa that cover up that hole. i personally didnt like them. i think i only have one side too. what i did was lower the tank about 2 inches and removed the oil injector. it dropped the look and is more sleek now. i should post a new video someday
Alvexx07 5 months ago
What camera is yours?
ilbisuper 6 months ago
@ilbisuper
Nikon D300s. with a 18-200mm F3.5-5.6 Lens.
Alvexx07 5 months ago
hey im thinking about getting a tomos streetmate racing49cc new should i get that if not any suggestions
bmx1811 7 months ago
@bmx1811
well i dont know much about it but i would take a look at the sachs Madass.. it comes in two versions and is a pretty nice ride comparing to the tomos too. both are good. i guess it depends on how much your laying down for it
Alvexx07 7 months ago
@Alvexx07 thanks for the info and i will look at it
bmx1811 7 months ago
Hey alvexx07, I just ordered a dellorto phbg from treatland and am excited for it to arrive. I see on your carb the throttle cable, the fuel line and a third black cable/line heading towards the rear of the bike. What is that third black line heading towards the rear?
magnams13 8 months ago
@magnams13
thats the brake cable. i dont have anything else running back there. I need to do an update on this, well bike is currently under construction from my recent Colorado trip but its getting a make over. :)
also what the third cable might have been was the oil injector running straight into the carb. but i removed it now. .
Alvexx07 8 months ago
Sick bike and Sick camera lmao
DJTronuk 10 months ago
Bro that intake is badass, id actually buy one from you if you would make another one up. I've got the 16mm dellorto on my 70cc w the treats hi comp head and ive been lookin for a decent intake.
Ranger4banger 11 months ago
@Ranger4banger
thanks man. Problem was i used some metal pipe from Home depot which i dont think was really good for welding. Lots of little tacks and beading, sometimes blasting through. So i wish i found better material but could not find anything. Afterwards i sealed all the smaller cracks with JB weld. It was my first time making a pipe. if i was to make another i would search for a better tube metal and somehow make it a little shorter.
I know what you mean by not finding it anywhere!
Alvexx07 11 months ago
@Roger4banger
I looked everywhere for something and couldnt find jack! had to make my own. even the rubber boot to fit it together was from some Radiator Hose i bought from Autozone that was 19mm. I wish i could make you one but i dont have much time. Picked up a gokart so work has been shifted. This moped is just about complete! :D
Alvexx07 11 months ago
So recent updates are tecno Estroil pipe and shortened the space between the carb and manifold. im jetting at 96 main.
Current speed 46mph GSP tested.
im adding a 20 tooth sprocket in the back and 28 in the front. (grinding required) also need to retard the timing so im not burning as hot. with the changes i should be going 53-55mph.
Alvexx07 11 months ago
The carbi fits but only the 12mm
NLstb 11 months ago
How fast does it go?
kenm70450 11 months ago
Treatland.tv is my primary store for buying parts.
the normal carb will fit but i went with a 19 over 15mm so i needed a custom pipe
Alvexx07 11 months ago
does the normal carbi not fit on the 70cc??
and where did you get the kit?
boynicklord 11 months ago
@boynicklord
the kit is from treats just a simple alukit. another project i have in mind is boring out the stock cylinder
Alvexx07 8 months ago
pretty cool :)
nitrousair 1 year ago