Very nice job! I have a 82 chevy i wanna do a lil body work on. By any chance could you show how you would do bodywork on the wheel wells? Also, i bought the same welder and was about to take it back, now i will keep it and use it
The music is mellow...wtf, is wrong with u dudes. Wait, that's the problem...some guts brains can't function outside of heavy metal or rock. Maybe, he should replace it with bigband or flamenco? Surely, that would be a problem, 2. Watch the darn video
Hello Scotty, when you installed the new rocker over the cut out one, did you install it overlapping the ends or did you trim it down evenly then weld the new one? because it appears overlapped..thanks let me know..
my rocker panel is damaged pretty bad. is there a unfixable point to a rocker panel? a car hit my vehicle on the drivers side and it even pushed the seat up a little.
slow spot welds, take your time, and most important make sure you have some metal behind the weld or you will just blow though it. And then you have a bigger hole. The best thing is to make some patch plates behind your weld, this should help you not burn though. Also low heat and high wire feed. When you are using harbor freight welders. I hope that helps Scotty,
it works just fine!
ScottysDetailing 3 weeks ago
Very nice job! I have a 82 chevy i wanna do a lil body work on. By any chance could you show how you would do bodywork on the wheel wells? Also, i bought the same welder and was about to take it back, now i will keep it and use it
lilbuster20 3 weeks ago
@ScottysDetailing Dumb question. Would standard body filler work for the seam seals, or is it not recommended?
CF4LIf3 1 month ago
@CF4LIf3 no.not flexable n will crack..and is not water proof..body filler is for the welded..ground down areas that are to be painted
caponeauto 5 days ago
@caponeauto K, thanks.
CF4LIf3 5 days ago
The music is mellow...wtf, is wrong with u dudes. Wait, that's the problem...some guts brains can't function outside of heavy metal or rock. Maybe, he should replace it with bigband or flamenco? Surely, that would be a problem, 2. Watch the darn video
ballershanelle 1 month ago
This goes into the annals of youtube videos with horribly mismatched music. Awesome guide though, thanks!
goodolarchie 1 month ago
Hello Scotty, when you installed the new rocker over the cut out one, did you install it overlapping the ends or did you trim it down evenly then weld the new one? because it appears overlapped..thanks let me know..
CHIBA280CRV 2 months ago
could you possibly find any worse music?!?
backwaterdogs 2 months ago
so how would you do that if its already been done once and you can't find the spot welds?
mikono14 4 months ago
what did u charge to fix this check out my video on my 1998 camaro ss pulling out and u will see the dent that i need fixed
ASCmustang88 4 months ago
Nice vid guys interasting Added it to my favrotes.
But where is you Safety Guard for the grinder, Gloves?
Welding in shorts and T-shirt, no safety glasses using a blow gun?
Tisk Tisk
HarbourPub 4 months ago
Very informative thanx..feel much better about doing it on my own now.
goodnamesareallgone1 5 months ago
LOL....the song just got even better. HAHAHAAHAHAHA Your hilarious.
UpstateDVDs 7 months ago
Great video! This should help me a lot! I did although manage to find some champagne...and dimmed the lights while watching...
UpstateDVDs 7 months ago
What would you like to see?
ScottysDetailing 7 months ago
GREAT JOB...WANT MORE OF YOUR BODYWORK VIDS !!!
Mr513phill 7 months ago
The music makes it sound like you're making sweet love to your car.
s0nnyburnett 8 months ago 4
Great video! You do good work!
Jay146992 11 months ago
it just depends on how much repair is needed, just drill out how many spot welds are needed to replace the damaged area. That's about it.
ScottysDetailing 1 year ago
my rocker panel is damaged pretty bad. is there a unfixable point to a rocker panel? a car hit my vehicle on the drivers side and it even pushed the seat up a little.
thedirtysouthofbc 1 year ago
slow spot welds, take your time, and most important make sure you have some metal behind the weld or you will just blow though it. And then you have a bigger hole. The best thing is to make some patch plates behind your weld, this should help you not burn though. Also low heat and high wire feed. When you are using harbor freight welders. I hope that helps Scotty,
ScottysDetailing 1 year ago
Very nice, what is the trick of welding without damaging the body? I have mig, flux welder also and use the flux more. 110V. Thanks.
k1kenzi 1 year ago
No it's the 110 mig welder from Harbor Freight without gas, but Beware it welds real hot & can warp panels.
ScottysDetailing 1 year ago
Great video. Thanks. Is that a 230v MIG welder from Harbor Freight? I've got one and still trying to learn. Welding is an art!
wilderness27 1 year ago
Informative but that music is killing me. Painful. I can't finish it because I want to blow out my eardrums.
Wapoochee 1 year ago 10
@Wapoochee Need som netal \m/ \m/
jakamake 1 year ago