Scooter Zone How To: Tighten SCS with Julio Oceguera

[sickscootervids23435]

how much should i trim my bars if im just switching to scs now with a proto baby scs clamp

[flreport23]

do you need over-sized bars for scs or hic ?

[sickscootervids23435]

i got a blunt complete nd jus snapped the forks nd have phoenix phorx but there short to my others. would proto babys scs fix this nd would the strippers bars work?

[flyscooterz]

will the phoenix slim scs compressio work with blunt forks and epic rewinds

[tommy1234567100]

Jdtheredsoxfan. U will need new forks as the blunt ihc is its own compression and scs is a completely different compression so u Will need a starnut in you forks for it to work the blunt forks have threads in and you will not be able to titen the headset

[flyscooterz]

i stripped my ihc compression ow can i get it out

[jptheredsoxfan]

Yo scooter zone, I got a blunt complete and they came with blunt IHC forks, been looking to get either proto baby or regular Proto SCS. Would I need to do anything to my scoot (besides cut the bars) to use it?

[PurpleRaindrops99]

I have Blazer Alumium Bars,Blazer Quad Clamp,District V2 and I am gonna get Blazer Aluminium Forks will I have to put a Star Nut In my Forks/Bars ?

[TrophyFreaks]

Can you have blazer pro scs with Apex Infinity Forks

[TheArviter]

I have epic zero offset forks will I have to trim them down for a baby proto?

[TheKeenanjake]

can i have a scs if i have blunt sob fork??

[mattpeeps02]

i want a pink phoenix i just have a lame blue intergrated one

[scooterguy195]

idk if this happens or happened to anyone but when i try to take out my bars the shim comes out with the bars and when i try to straighten the bars to the fork the shim moves around and its very hard to get my bars straight because its all stiff even when i loosen all the bolts too. what should i do? and by the way i have a standard size proto scs

[skyscootering]

my compresion always comes loose scs but i tryied lock tighting it and it still comes loose how do i keep it tight

[Tupsuboi]

@skyscootering Try using blue locktite. And if youre using long ICS bolt, then you can use nyloc too.

[MrMultipack123]

why do you have to cut the slits off?

[xDMataovvxD]

K so I have phoenix phorx and I have a grenade clamp and I tighten my bolt at the top of the fork and I spin my forks and it comes loose?? Please respond asap

[yahoochobots]

can you please help me out....I am trying in vein to help my kid vamp up his nitro deck and have brought scorcher forks,zero gravity oversized bars. have put hic in but am having trouble with the first mv headset(threadless?). after puttin it all together it seems quite shaky...do i need spacers or am i doing something wrong?any suggestions would be appreciated....

[Tupsuboi]

@yahoochobots Are you sure you have tighten your HIC enough?

[ScooterZoneVideos]

@willcuthbertproducti

yes you do

[GrupoAdolfo]

i tried ordering a regular proto scs from your website and it wouldnt let me confirm the order, can i order it over the phone?

[ScooterZoneVideos]

@GrupoAdolfo

did you make an online account?

[kwain11]

if i have lucky smx forks with a mgp deck will i have to cut my forks down with the proto baby? please help

[ScooterZoneVideos]

@kwain11

yes you will

[dropkyker]

do proto scs compessions fit oversized bars?

[ScooterZoneVideos]

@dropkyker

yes it does

[MrJamesbondisback1]

what is the cheapest scs

[ScooterZoneVideos]

@MrJamesbondisback1

proto $65

[michiganboys12]

can distric bars fit with fuzion elites scooters threadless stuff or do u know?

and do i need a oversized clam or SCS proto and what size

[SamuelPreston98]

phoenix fork or vertx smx v2? or lucky smx? what forks better?

also if i have a slit in my bars, can i still use an scs, or do i need to cut it out? what will happen if i ride with a slit in my bars with the scs ?

[ScooterZoneVideos]

@SamuelPreston98

phoenix or lucky. you need no slit in your bars. or you can put a piece of old forks inside your bars so the slit cant pinch

[SamuelPreston98]

@ScooterZoneVideos ok thanks, btw who answers all these comments? (:

[Andyproscooter]

would it work with a phoenix fork ? plzz reply i need it

[ScooterZoneVideos]

@Andyproscooter

yes

[Andyproscooter]

@ScooterZoneVideos Thanks

[aprylgorecki]

can u put scs's on a ultra pro kick scooter??

[ScooterZoneVideos]

@aprylgorecki

yes but you need a threadless fork and headset

[MRKRUNKELSCOOTERING9]

@ScooterZoneVideos when you guys installed a baby scs on my scooter you cut my forks and i was wondering if i could do hic with cut forks? please reply

[mrbugboy31]

If I cut the slit off my nitro extreme bars can I fit a swish SCS

[ScooterZoneVideos]

@mrbugboy31

only if the scs can fit oversized bars

[dannyboythatdude]

could you tighten it from bottom to top?

[ScooterZoneVideos]

@dannyboythatdude

yes

[jackaboo123]

can lucky smx fit ISC

[ScooterZoneVideos]

@jackaboo123

ICS? yes it can

[louiejb12]

im getting a blazer scs and im just wondering do you have to tighten it top to bottom with that ??

[ScooterZoneVideos]

@louiejb12

i wouldnt buy anything blazer, all of their parts are straight knockoff's of real parts.

[Un1TScooters]

@ScooterZoneVideos + @louiejb12 Not true... My blazer SCS is dialled, looks great, light, cheap and runs perfectly with no wobble or rattle...

[ScooterZoneVideos]

@Un1TScooters

they are decent because they are a direct knockoff of the proto scs. I absolutely do not reccomend them not just because they knocked off a legit companies part, but proto invented the scs, and blazer just disrespected them

[ScooterZoneVideos]

@Un1TScooters

they are decent because they are a direct knockoff of the proto scs. I absolutely do not reccomend them not just because they knocked off a legit companies part, but proto invented the scs, and blazer just disrespected them

[louiejb12]

@ScooterZoneVideos well ive allready bought it but could you plz just tell me if its the same way to tighten with every scs ?? and have you heard of ritchey headsets ?? :)

[ScooterZoneVideos]

@louiejb12

it will be the same because the blazer is a proto copy cat

[ScooterZoneVideos]

@louiejb12

yes its the same as every other scs. nah never heard of those headsets

[swifthand1]

so i just bought baby scs and i have razor ultra pro lo bars with the slit i dont want to cut it down i need to buy a shim? and will the baby scs come with a shim?

[ScooterZoneVideos]

@swifthand1

no you need to find an old piece of fork and hammer it up into your bars. that way the slit wont pinch

[TheKing10062]

How tight should I tighten the bolts

[ScooterZoneVideos]

@TheKing10062

pretty snug and tight

[TheKing10062]

How tight should I tighten the bolts

[movieguyify]

if i have an mgp deck, threadless headset, scorcher forks, proto clamp, and rad crow bars do i need spacers cuz a big gap is left

[lazernater]

can you use fsa orbit??

[ScooterZoneVideos]

@lazernater

any threadless headset

[cublifeproductions]

Hey I have baby scs and I have a 1/2 inch spacer on the fork and whenever I tighten my headset then tighten the clamp the clamp always comes loose ad the bars start to wobble then I tighten it really tight again and in 5 minutes it it loose again. Also the bottom 2 bolts on the clamp are thinner that the top ones so i was wondering if I need a shim for the fork

[ScooterZoneVideos]

@cublifeproductions

no you def dont need a shim, check to see if the cap in your bars isnt resting on top of your forks

[scooteringrules]

what forks need to be cut for baby proto scs bcause i want to run it on EPIC Zero Offset Forks

[ScooterZoneVideos]

@scooteringrules

every fork except the phoenix and tilt

[joshscoots119]

im getting invert bars should i get a slit or not with one because ive got a threadless fork?

[ScooterZoneVideos]

@joshscoots119

you always need a slit unless you have scs

[maddyrocks1998]

how many times should your fork spin when you tighten your top cap bolt

[ScooterZoneVideos]

@maddyrocks1998

its up to you. its preference

[bennyg1501]

can u do a video on how to install a pheonix scs smooth

[ScooterZoneVideos]

@bennyg1501

its the same thing

[alexmontefusco1234]

sexxy scooter



[xP34CHYx]

do all threadless forks have a hole for the scs bolt to screw into on the top? or do you need a starnut for some threadless forks?

[ScooterZoneVideos]

@xP34CHYx

some need the starnut, some dont

[circkbmx101]

does the full size proto scs raise your bars if so how much please respond thank you in advance

[ScooterZoneVideos]

@circkbmx101

yes 2 inches

[oregonducks123456]

with a shim does that mean that you can have a slit in them or is that if your riding oversized bars?

[ScooterZoneVideos]

@oregonducks123456

you can never have a slit with SCS

[scooterproductions15]

hey, i use a full size black proto scs and i have hic epic rewind bars and pheonix phorks and my bars move up and down a little bit? plz reply!!

[ScooterZoneVideos]

@scooterproductions15

is your headset tight? is there a slit in your bars?

[legofire099]

my scs is small because my scooter is smaller but i have longer bars

[mikeLacara13]

Does a full size proto work with Mgp nitro forks or do I need spacers and if so were can I get these spacers

[ScooterZoneVideos]

@mikeLacara13

if your using it on an mgp im pretty sure you need spacers

[ScooterZoneVideos]

@mikeLacara13

you will most likely need spacers depending on your setup

[BurkittScoots]

what scs is that?.

[ScooterZoneVideos]

@BurkittScoots

proto baby scs

[CreativeHam720p]

i like big black cock in my ass <3

[DanLaceyCookies]

If I bought French ID MonoBlock forks could you cut them and install a starnut for SCS for me? There is no option when I am looking on titetoyz, and how much extra would it cost?

[ScooterZoneVideos]

@DanLaceyCookies

We can do it for walk in customers only since we have the scoot there and can figure out the exact amount to cut off, since different headtubes and headsets are different lengths. Just use a headset spacer if you can

[xDeathrow74]

y do u have peg, fag

[ScooterZoneVideos]

@xDeathrow74

y do u exist, fag

[TheeRichardSoria2011]

If my fork snapped, and a couple scs bolts are stripped, and i bring a fork,and the rest of my scooter, and I buy bars at Scooterzone in laguna hills, can I get my scooter put back together?? I know I'm going to have to pay like $15 bucks for u guys putting it together but can I do so?????? Please reply. Thanks :)

[ScooterZoneVideos]

@TheeRichardSoria2011

yeah we can do it

[MrACLx]

could i just use the clamp part as a clamp?

[ScooterZoneVideos]

@MrACLx

nah its used for compression only

[JALTscooters]

i have blazer scs and blazer threadless forks and an eco anodised threadless head set but when i tighten every thing up my forks still come out of line to my bars please help

[ScooterZoneVideos]

@JALTscooters

Thats strange man, all the bolts are tight?

[JALTscooters]

@ScooterZoneVideos yer it just moves out of line so easy u can un screw the scs with your foot and ideas ?

[ScooterZoneVideos]

@JALTscooters

you have all of the bolts tightened up good? thats really strange man

[JALTscooters]

@ScooterZoneVideos thanks any way dude :)

[sdlm360]

@JALTscooters scratch the forks with a wire brush so it can grip when you put the clamp on, and you need to tighten the bolts as much as you can

[scootin93]

how wide do u think bars should be for begginers

[scootin93]

@scootin93 beginners

[ScooterZoneVideos]

@scootin93

thats up to you, bar size is all preference.

[ScooterZoneVideos]

@mrjamscoots

Ive never seen grit forks, but im sure they will work fine.

[ScooterZoneVideos]

@mrjamscoots

sounds pretty good to me. as long as you like it

[ScooterZoneVideos]

@mrjamscoots

you dont need to take it out. just cut them down to the height you want for your SCS and leave it in there.

[djskittleR9]

can a compression bolt work with the scs



[ScooterZoneVideos]

@djskittleR9

what do you mean?

[djskittleR9]

@ScooterZoneVideos

wait nevermind i feel retarted

does scooter zone sell eagle sport wheels

[ScooterZoneVideos]

@djskittleR9

sometimes but not usually

[iDanzaHD]

how do you tighten a compression headset please reply!

[ScooterZoneVideos]

@iDanzaHD

follow the steps on our various how to videos

[ScooterZoneVideos]

@dieterbusch1

yes unless you have phoenix or tilt forks

[ScooterZoneVideos]

@13tooddie13

yes it would

[ScooterZoneVideos]

@dieterbusch1

yes unless you have tilt or phoenix phorx

[mattscootsplaces]

could you sand the threads off of forks and instal a star nut and use them as threadless forks???? please reply

[ScooterZoneVideos]

@mattscootsplaces

definately not man. that would make your forks too thin.just use the 2 jam nuts that come on the forks.

[CoLaScooter]

If my forks are threadless but have ics slot will they still work?

[ScooterZoneVideos]

@CoLaScooter

You mean a slit in your bar? you either need to cut it off or put an old fork tube in it

[latounga1]

hey, do you have to use an intergrated deck for scs?

[ScooterZoneVideos]

@latounga1

no you dont. All you need is a threadless headset and a threadless fork

[latounga1]

@ScooterZoneVideos thanks, im ordering mine tonight:DD

[hotdogboy01]

hey guys i have a problem with my big proto scs one bolt wont come out wat schould i do? please reply

[ScooterZoneVideos]

@hotdogboy01

the bolts need to come out evenly. to tighten the rest of the bolts until they are even with the one you cant get out. If you can tighten them just a hair more. That should release the stuck one. Crack it just a little bit, then crack the rest. Just go bit by bit on each bolt until they are all loose

[123puzzlesmc]

is th blunt ace of spades deck good for someone 100 pounds



[ScooterZoneVideos]

@123puzzlesmc

Yeah they are a decent deck. I would reccomend the ultra pro as well

[mitch29082908]

does proto scs clamps fit district bars plz reply

[billstar97]

@mitch29082908 Yep just cut the slit off

[ScooterZoneVideos]

@mitch29082908

yes as long as its the full size SCS and you take the shim out.

[DJMULLET118]

i have a maddgear pro team eddition (green)

i have head shake!

how do i stop it with out tightning the bolts

do i need to move the clamp?

pls reply

[ScooterZoneVideos]

@DJMULLET118

Tighten the 2 threaded jam nuts that are under your clamp

[LDPJRQ]

My headset squeaks really bad and I havent long how can I fix this please reply

[ScooterZoneVideos]

@LDPJRQ

What kind of headset do you have?

[LDPJRQ]

@ScooterZoneVideos eco threadless headset

[ScooterZoneVideos]

@LDPJRQ

Sometimes the headset has to be broken in, then the squeaking goes away. Others you just need to take everything apart and make sure everything is set up right and the cups are flush

[ProductionsTaylor]

where did you get those bars plz tell me I can't find them!?

[ScooterZoneVideos]

@ProductionsTaylor

TiteToyz.com

[MrKBobbs]

Mine keeps wobbling :(

[ScooterZoneVideos]

@MrKBobbs

Does it ever get tight or does it just loosen up really quick?

[MrKBobbs]

@ScooterZoneVideos Its as tight as it can go but it is still a little wobbly.

[ScooterZoneVideos]

@MrKBobbs

whats your front end setup?

[vanscotter05]

How do I get rip of the proto logo on the scs

[ScooterZoneVideos]

@vanscotter05

You dont man, just put a sticker over it or something.

[TheEstpk]

can i put baby scs to rup1 razor ultra pro lo ?

[ScooterZoneVideos]

@TheEstpk

Yes but you will need threadless forks, threadless headset, and you will need to cut the slit off your bars

[rodneyt1997]

could i use regular size bars (1 1/8 inches) with the big scs and no shim?

[ScooterZoneVideos]

@rodneyt1997

No, you need the shim with standard sized bars and a full size SCS

[bigflearoy77]

There still good

[mrmotoman96]

@rodneyt1996 thanks a lot for your help

[mrmotoman96]

if you have a threadless headset and threaded forks can you use a compression set

[rodneyt1997]

@mrmotoman96 yes its basically the same as using threadless forks

[ScooterZoneVideos]

@mrmotoman96

No, the 2 jam nuts on your fork are the only compression that you can use with threaded

[xEzB1995]

hey my scs is pretty much 2 doube ? ca i caethi to aqud??

[bigflearoy77]

My friends bolts are stuck and will not come out what do we do

[ScooterZoneVideos]

@bigflearoy77

Thats gonna be fun... Are they stripped or still good?

[joshyk99]

can a threadless headset fit threaded forks.

[ScooterZoneVideos]

@joshyk99

Yes it will work just fine

[SeanDunne666]

hi, i have threaded inwards and i dont really wanna buy new threadless forks as inwards are like 200 bucks can i cut down the threaded fork and i know i have too cut the bars down for no slits but can i cut down the threaded ones please reply!

[TheSundaynite]

@SeanDunne666 theyr like 50 and no tht woudnt work

[SeanDunne666]

@TheSundaynite no there not i got mine for 190

[TheSundaynite]

@SeanDunne666 then your not from america

[ScooterZoneVideos]

@SeanDunne666

You dont have to cut them down, if they are too long because you have an MGP then either cut them down or use spacers to raise your SCS. But dont worry if you need to you can run threaded forks in a SCS

[iscootful1]

Australia

[ScooterZoneVideos]

@iscootful1

No clue for shippig off the top of my head right now, Im thinking around $45 US maybeee but dont quote me on that. Try sending us an email to the site they could help you out better there

[RandomDude1999]

if you get full size, should u cut ur bars down 2 inches lower than i want it for the scs.?

[ScooterZoneVideos]

@RandomDude1999

Correct, 2 inches

[maxwellsmaxwell]

hi, did you have to cut the fork down to fit it into the baby scs?

thanks bro

@maxwellsmaxwell

Yeah he did