@okeylang47 the amp has a thru feature which allow both channels to be driven with one signal, you use a short patch cable to connect the thru output to the combo xlr/phone input of the other channel.
Issues as to why some things do not work together, yamaha amp may be +3 positive and grounds pin 2 on quasi balanced input, I have had problems with older gear that was not a truly balanced input/output, manufacturers play games trying to make equipment look like it is balanced to save money, Mackie, Soundtech, Yamaha, Peavey are all guilty of it, if you do not have good quality isolation transformers in your audio gear you're not really in the sound biz yet. I just got IPR3000s, no 6Ks yet.
Journey tune is I will be alright without you, cool old song, speaker cables are 12 gauge quad wire,yep just using a camera, did not know it would make movies when I bought it, Iam real old school, early IPRs had issues, a vendor in China used the wrong capacitor, if you are going to make these things work hard at 2 ohms on both channels, get something else, there is a reason some things cost less than others, personally I would perfer all my electronics be made in the USA, but we are cheap.
@russellnc how old of models are we talking about? i'm looking to buy one within the week, would help to know what year they fixed it. thanks a billion
@NagrusD4Prez , the problem the IPR 1600 had was that it would shut down improperly, that issue has been fixed, all amps shipping currently should work, the second issue with the 1600 is that it is too sensitive, why it was built that way I do not know, you need to reduce the gains on the inputs to 10 or 11 o'clock to work with the outputs of most pro mixers, I have seen other companies pull the same trick, on makes you think the amp is louder, but you just hit the limiters sooner.
Seems like you have some close up problems with the vid. If you want to focus the camera, stop the video recording, (i am assuming you are using a point and shoot camera), go to the settings that you see the flower Icon, or aka macro shooting, then get an upclose for the camera to focus, then start recording (or take the picture) for upclose recording/shots.
Hey a buddy of mine is having problems with his IPR 1600, Okay if he has both IPR 1600 & his Yamaha P4500 On the same Power Bar The IPR won't play sound unless he unplugs the Yamaha, There in separate carrying cases.
@zZZzzzSnooze2nd Hello again one question did you get your money back from the order you canceled on the peavy and did you ever fine out why did it take so long for you to get it did you call or write the company you order you amp from?The re-son why i ask is these amplifier are new from 2009 and 2010 right i hope i am my point is where is your if other are get there own?
To be fair, ive had power amps sent back to peavy, theyve been bench tested and sent back to me, told i must have had no problems with the amp in question. That said, a week later, the same problem started again, peavy needs to erm....cool down i think the word is, over heating is still an issue
Comment removed
crisprapper 1 month ago
WHEN YOU CONNECT THE SHORT 1/4 TO 1/4 ..? WHAT R YOU TRYING TO DO THERE?
okeylang47 5 months ago
@okeylang47 the amp has a thru feature which allow both channels to be driven with one signal, you use a short patch cable to connect the thru output to the combo xlr/phone input of the other channel.
russellnc 5 months ago
can that amps use in club to play subs like 4 4000 watts each?
fatal1945 7 months ago
Issues as to why some things do not work together, yamaha amp may be +3 positive and grounds pin 2 on quasi balanced input, I have had problems with older gear that was not a truly balanced input/output, manufacturers play games trying to make equipment look like it is balanced to save money, Mackie, Soundtech, Yamaha, Peavey are all guilty of it, if you do not have good quality isolation transformers in your audio gear you're not really in the sound biz yet. I just got IPR3000s, no 6Ks yet.
russellnc 11 months ago
Journey tune is I will be alright without you, cool old song, speaker cables are 12 gauge quad wire,yep just using a camera, did not know it would make movies when I bought it, Iam real old school, early IPRs had issues, a vendor in China used the wrong capacitor, if you are going to make these things work hard at 2 ohms on both channels, get something else, there is a reason some things cost less than others, personally I would perfer all my electronics be made in the USA, but we are cheap.
russellnc 11 months ago
@russellnc how old of models are we talking about? i'm looking to buy one within the week, would help to know what year they fixed it. thanks a billion
NagrusD4Prez 6 months ago
@NagrusD4Prez , the problem the IPR 1600 had was that it would shut down improperly, that issue has been fixed, all amps shipping currently should work, the second issue with the 1600 is that it is too sensitive, why it was built that way I do not know, you need to reduce the gains on the inputs to 10 or 11 o'clock to work with the outputs of most pro mixers, I have seen other companies pull the same trick, on makes you think the amp is louder, but you just hit the limiters sooner.
russellnc 6 months ago
I plane to use these with two behringer b212xl (or equivalent)and 2xmonitors for acoustic band(bluegrass) small venues.
3mics,guitars bass mandolin.
Also what is up with the heat ?Any experience?
Any recommendations on this subject and related?
u4david 1 year ago
What gauge speaker cable is that on the left output of the amplifier? Is that just 10 gauge?
ShieldsDJServices 1 year ago
Seems like you have some close up problems with the vid. If you want to focus the camera, stop the video recording, (i am assuming you are using a point and shoot camera), go to the settings that you see the flower Icon, or aka macro shooting, then get an upclose for the camera to focus, then start recording (or take the picture) for upclose recording/shots.
djdumbbi 1 year ago
Hey a buddy of mine is having problems with his IPR 1600, Okay if he has both IPR 1600 & his Yamaha P4500 On the same Power Bar The IPR won't play sound unless he unplugs the Yamaha, There in separate carrying cases.
zZZzzzSnooze2nd 1 year ago
He told me the day I ordered the 6000, I'm having 2nd thoughts about my order.
zZZzzzSnooze2nd 1 year ago
@zZZzzzSnooze2nd Hay how is the 6000, ipr peavy amps?
DJSHADDY2K7 1 year ago
@DJSHADDY2K7 Paid in full but didn't get it, 3 months waiting list so I just canceled my order.
zZZzzzSnooze2nd 1 year ago
@zZZzzzSnooze2nd Hello again one question did you get your money back from the order you canceled on the peavy and did you ever fine out why did it take so long for you to get it did you call or write the company you order you amp from?The re-son why i ask is these amplifier are new from 2009 and 2010 right i hope i am my point is where is your if other are get there own?
DJSHADDY2K7 1 year ago
To be fair, ive had power amps sent back to peavy, theyve been bench tested and sent back to me, told i must have had no problems with the amp in question. That said, a week later, the same problem started again, peavy needs to erm....cool down i think the word is, over heating is still an issue
FANNYLEROUX 1 year ago