Echo 1 M28 Review

[madcow3095]

would a 500mm tight bore fit with the adapter?

[PrFcj0137]

what did you use to bore out the adapter?

[35ozone]

Haha love this guy I lol'ed when u started swearing at the weird compartment

[sargentghost24]

does ur bolt have a little slack like it wiggles a little on mine

[fuzzyrhino5]

well if u hit the mags there gonna get worse.

[FlameKaiser2]

He kinda looks like Aaron Rodgers O.o

[MrHappyChang]

did you have any issues with misfeeds?

[Kole208]

hey also were did u get your barrel can u put a link to that i cant find it please!

[Kole208]

if u want that to hit harder try looking at the matrix 500% for it and what upgrades do u plan on putting in it im probilly getting a matrix 300% for myn but what else are you putting in it i need to make my cristmas list im buying this gun with my own money but asking for alot of the upgrades for cristmas thanks.

[KiwiKiller88]

>>>hey i heard in the review that u put a masume 640mm 6.01 barrel in ur gun but when i called airsoft gi they said it wudnt fit. R u sure it fit for u or did u modifiy it at all?

[joeddrgod]

@KiwiKiller88 depends on who you asked, but it will with modification as i already did it lol

[TheItalianPerson]

yankees! thats the spirit

[abrahamwaleed]

how did u get the 640mm tight bore in there i was ganna buy it but airsoftgi said it wont fit, what you do?

[TheSonny2525]

lol wht the fuck am i supposed to do with this!! laughed my ass off

[SuperBill1234567]

howd u get an AEG barrel in there

[cowboysfan1071]

Im left handed is there a way to switch the bolt to the other side?

[joeddrgod]

@cowboysfan1071 nope, dont see how that can be done

[jbence79]

ok thanks!



[jbence79]

where did you get the barrel from and does it work with the gun?

[joeddrgod]

@jbence79 i got both from airsoft gi and yes it works, just be ready to do a little custom fitting on the hop up unit itself

[gamewiz0070]

is it the same bolt pull as the bar-10?? (non upgraded bar10)

[joeddrgod]

@gamewiz0070 heeeeeeeeeeeeeck no, this thing is a beast compared to a bar 10

[gamewiz0070]

@joeddrgod LOL ok

[pker1369]

so u would definetley recommend this gun?debating wether or not to get.

[joeddrgod]

@pker1369 definitely, its a very good looking and well performing rifle stock let alone with the upgrades that are now available for it

[xLionheartHxC]

The real gun doesn't have a magazine, it's the bullet dump. To where if you still have rounds in your gun and wanna take them out you open the dump and they fall out.

[TMOSSIFIED1]

@xLionheartHxC your wrong there sir. the real gun (M24 civilian) has a 5 round semi flush mag

[ShottysGotShots]

i'm impressed that you got a longer barrel in there considering there's only like one after market barrel so far and it is still only stock length. Anyway, have you had any sort of performance issue with this gun? Most people say that they often experience misfeeds and slam fires.

[eshep4913]

i get what ur sayin bout the extended barrel..but what if u add a 6.01 barrel then add a barrel extension...will the barrel extension without the 6.01 going thru it (likeurs) even do anything for the gun?

[SiTdOwNaNdWaTcH1]

did you get the threaded barrel with it?

[3AWTalon]

@SiTdOwNaNdWaTcH1 its supposed to come with a threaded barrel

[SiTdOwNaNdWaTcH1]

what website did he get it from?

[sgtjakass]

@SiTdOwNaNdWaTcH1 evike or airsoft gi

[joeddrgod]

@sgtjakass thought i said it, but maybe not, i picked it up from ASGI love that place

[notsew321]

anyone one know what kind of spring/ spring guide would be best to help upgrade this gun?

[joshanddrake]

@TheRossBeast it wasnt but not the mag isnt feeding AND it is now slam firing. fml

[joshanddrake]

my mag wont even feed. any help?

[blumonky2468]

the open latch at 723 is just an emulation of the real gun. thats where the mag is supposed to be on the real deal

[joeddrgod]

@blumonky2468 i'm aware of that, i was simply making a joke...

[imben1256]

2 questions

1. how do i adjust the stock

2. how do i get the orange piece off the barrel

[joeddrgod]

@imben1256 i just kinda yanked it off with locking vice grips/pliers

[Ninjakitty738]

@joeddtgod haha alright, thanks. I'm kinda a freak when it comes to my stuff being perfect tho

[Ninjakitty738]

@joeddtgod alright, but is your stock wobbly too?

[joeddrgod]

@Ninjakitty738 a little but its nothing thats gonna bother me unless i somehow start freaking out about my guns having to be perfect

[Ninjakitty738]

@joeddtgod the adjustable buttstock wobbles on my model

[joeddrgod]

@Ninjakitty738 hmmmmmm probably just a design flaw because the threads probably arent perfectly precise i wouldnt put too much thought into it however

[Ninjakitty738]

does your stock wobble, because mine does

[joeddrgod]

@Ninjakitty738 what part of your stock? cuz i have yet to experience any wobble

[TehNoodleBoy]

I'm new to airsoft sniping, and I have a question. What would the effect be of using .20 bbs against .30? Does .30 have less velocity, but more accuracy?

[joeddrgod]

@TehNoodleBoy the heavier the better, for sniping nothing under a .28 a .20 will do almost nothing aside from give you a really high velocity, they hold no force down range as compared to like a .30 .40, i prefer .40s for the accuracy and range, i dont mind the lack of velocity since i can reach out further and actually make an impact rather than have people not know if a breeze hit them, or a leaf fell on them...

[projectx45]

Quick question, I'm wanting to get a barrel extension so I can remove the orange tip but still have it for when I'm in my backyard (due to pissy neighbors). Would the Madbull Blackside be good?

[IMdirtbikeCRAZY]

4:35..did u fart?

[joeddrgod]

@IMdirtbikeCRAZY nope more feedback from the chair

[BlueKrown]

@joeddrgod Sure...Blame it on the Chair....

[ironman97912]

dude u sud do a shooting test with that tightbore

[MrCombatboots9]

What would fps be with 30 gram bbs?

[joeddrgod]

@MrCombatboots9 not entirely sure, havent chronoed it, but i would have to say around 450 maybe?

[tacketja032995]

@joeddrgod

hey dude, sorry if this sounds wierd, but are you part of an airsoft team called the tribe or something like that?

[joeddrgod]

@tacketja032995 that i am, its actually technically my team, but i started another wing of the tribe under a different team so ya i am but i dont play with those same guys anymore

[tacketja032995]

@joeddrgod

yea, because i thought i remembered you from the evike sale a while ago, me and a few of my friends were in line next to you, you are an airsoft tech or something right?

[WolfDog3Airsoft]

Would you recommend this just to get the gun and use or do i have to upgrade it an stuff?Also how hard is the bolt to pull back?

[joeddrgod]

@WolfDog3Airsoft well its considered fieldable out of the box, but personally i would still upgrade because theres a lot of potential still in the rifle, but at 530 you cant complain, but about the bolt, if your concerned about how difficult you might want to reconsider any bolt action rifle, the simple truth is the higher you go in velocity the harder it becomes, and this is the hardest hitting stock rifle out of the box.... so if you a little on the weak side idk if this is the rifle for you

[abm92296]

@joeddrgod I was seriously about to click the order button for the KJW M700 because it's based on a Remington, but I heard about this gun, watched only three vids about it and I already WANT it. This gun is a boss by what I've heard... I was gonna just buy the M700 and upgrade it, but why not get the m28 and upgrade it even better? lol

[abm92296]

@joeddrgod I was seriously about to click the order button for the KJW M700 because it's based on a Remington, but I heard about this gun, watched only three vids about it and I already WANT it. This gun is a boss by what I've heard... I was gonna just buy the M700 and upgrade it, but why not get the m28 and upgrade it even better? lol... I am going to get it and spraypaint it camo

[jklbucs96]

what front sling mount is that and where did you get it?

[aznnyoo]

that latch is used on the real steel rifle. its a quick way to drop all the rounds in the rifle.

[joeddrgod]

@aznnyoo lmao you need to do a bit more research about rifles bro, thats where the mag goes on real steel, r700 an m24's

[aznnyoo]

@joeddrgod ops my bad. ur right the mag goes there. thanks for the correction

[joeddrgod]

@aznnyoo no worries, i was just making a joke at the fact that echo1 actually has it there when it has no purpose on this rifle

[bloodykillar]

VSr-10 parts don't work with the echo 1 m28

[gunman35]

im guessing you hate the yankees??? haha

[xxDRAGON64xx]

Your review and Longbow's are the best video reviews on the rifle yet. I just got my rifle today, but I will not start anything with it till tomorrow... again, nice review!

[joeddrgod]

@xxDRAGON64xx thanks man, i tried to fill in the gaps since not many people have really gone into their rifles yet and certain things were just missing that i personally feel are important, please stay tuned tho, i have a lot more reviews coming up, thumbs up and subscribe to keep me up there :)

[fattybutt96]

do you know if this gun gets slam fire?

[joeddrgod]

@fattybutt96 well all spring rifles will once the sears wear out, but they seem pretty strong so far, i dont have any worries about them as of yet