Chew Can Lid Trick

[scottbarnes7268]

Chck my video out I do it way better and so much faster

[SupersethyBoy]

Thumbs up for Copenhagen WinterGreen <3

[Ltpeppers05]

thumbs up if you think the best dip flavor is Copenhagen Black

[Bowtiepride3]

I tried it with a skoal can for bout an hour couldn't do it for the last 15 mins it was makin the noises but I quit

[bigdipper0]

i made a beer pong table out of them its bad ass

[archerbruise23]

holy shit that does wear out your hand. copenhagen black is going on my hat!

[10dylpickle]

I folded mine and put it on my hat.

[WARTHOGFFFFF]

I did this to a grizz winer green lig then drilled hole in it and in my mossy oka hat and used small screws to hold it on to the hat it so beast ooo by the way i have it trade marked lol.......JK dont take my idea ill kill peepl

[wonderfly37]

i screwed up a redman lid too...

[JStrickland4496]

You can do it with a grizz can you just gotta do it just right or you'll crease it or bend it to far

[wizlewiz748]

Plzzzz post a grizzly vid I really need help with it I have tried several times and always screw it up I need tips:P

[juan92r]

im stuck on a grizzly lid and have been doing it for hours but is fun

[diperrimax]

i tried doing this with a grizz lid and it sliced my finger open hah

[xxHaBiTzZxx]

close your eyes and listen to what he says...then the noise xD

[austinver]

I wish I woulda started doing this b4 they put the new warning labels on then

[onlineredneck]

it didnt work for my copenhagen lid

[Irishdipper57]

I use it as a money clip..

[Tacgoose]

0:31 sounds like he's slapping the pud

[DURAMAXDIESEL185]

I did a grizzly wintergreen lid and it worked but its thucker so it takes mmore time than skoal or copenhagen lids.

[futuremarine2013ify]

what i do is get a fish hook for my hat and slide it under the hook up under the bill of my hat

[jamesrandallashley]

you put it on a hat

[DURAMAXDIESEL185]

@jamesrandallashley

i folded it in half and put it on the bill of my hat

[joshmcn781]

belt buckle or truck emblem haha

[idafornian]

@rednekboi72 cant do it too hard, or you'll bend it, slow and steady, not hard at all, you might get a callous

[caddell2432]

my record is 23 seconds

[MrRedneck4545]

screw you usin the word hickish thats are word

[royaloil]

Sounds like you were beating off in fast motion lol

[gunny426plymouth]

lol my friend glued it to his hat the hat he wears to school! haha

[coHon96]

I couldn't do it with the grizzly cans, I was really disapointed because that's all I dip

[slipknotscottie]

i can get a natural lid in a minute 9 seconds!!!

[jhkj654]

I don't know why y'all go for the flavored dip to me it's nasty I like natural

[TxVIRUSx]

ROFL to the fast forward sound. Sorry my immaturity came out a little

[AssDeepInDip]

i find its much easier to do it with cope cans in the fiberboard can(lc and snuff) because the lid is looser but its reaaly effing hard to do with grizz cans imo

[Skillet0429]

u said grizzley lids were to thinck but will it still work??

[ryan129222]

@Skillet0429 no they just bend but you can try a can opener and cut it out

[imask8nfreak]

KAYAK GRAPE!!

[checktheyellowpages2]

@imask8nfreak

[BigdipperJT]

good for skoal tins

[MrCompaqs88]

WELL IM WHAT YOU REFER TO AS HICKISH SO IMA MAKE A FUCKING COPE SUIT AND WARE IT TO MY PROBATION OFFICERS HOUSE AND SHOW HIM MY NEW TRICK WITH LONG DARTS(O_o) THANK YOU, NOW I HAVE A LOT A GLUING TO GET TOO. THANK YOU VERY MUCH~ GRIZZLY MAN OVER AND OUT. .

[bap32560]

WTF is hickish suppose to mean???? 

[Duneboi64]

i bet all the girls that watched this wish they had you and your fast hands lol

[athomason27]

turn it over and it works faster. .

[juggalotwitch]

that trick does work i did it in class it took me about 10 mins to do

[johntlilly]

dip is snuff not chew chew is jaw backer

[johntlilly]

dip lid

[pickalock865]

another trick to dipin is get you a grizzy can the plastic one an use lighter heat up the top of the grizzly can go in circles which will melt the clue peal of the grizzly print an you got u a grizzly sticker got one on my truck right now

thumbs up if it works.

dipip4life

[WiknikFarmboy]

i just finished my tin imm gonna go try it now hahah

[JTheGuitarPlayer]

my hands hurt. just finnished a can of straight and i've been squeezing this lid for over an hour! no results except its warped

[ChevyRidinHighK1500]

@CopenhagenDipper96 i take a pice of sheet metal and cut it out with a plasma cutter and grind it down and tac weld a cupple pices on and paint it and put the lid on it

[penguinboy666]

i think it might work with Grizz...letcha know when my cans empty :)

[TheFreakyfixed87]

gizzly is the hardest to do this withhh!:(

[canaanthegreat]

WTF can't do it it just breaks in half

[revolution55125]

@canaanthegreat It shouldn't, considering cope is tin. 

[MERSC803]

DAMN i bet those spaz attacks you have really suck when youre trying to fuck a girl. LOL

[AvEryBadApPLe]

ninja stars, bro.

[Trucker297]

WTF i cant do it with my canadian chew can lids :(

[dillman653]

3 to 4 mins my ass i can do it in like 30 secs

[MrLilRichard]

Screw u dude about the hick part my lids cover the top of the cab in my f-150 Fx4 and I'm only 16 so yea I guess I'm a hick

[flyingpanda9]

i wish the lids didnt have that fucking WARNING covering half the lid, then this would be a usefull trick.... :(

[MMaxxWardd]

does this work for the current cope lids?

[IMREDNECKIN]

i did it with a grizzly long cut mint can lid

[zacsparksbmx33]

12 people are fruit chewin pussys

[tannerturlington]

thumbs up if u have a new copenhagen belt buckle after this.

[aus199699]

@tannerturlington shut up

[SpecialJoe34]

sounds like a rabbit

[joshcm1990]

But I can't keep it to stay on my hat

[joshcm1990]

got it lol

[lunsford350]

done it in 45 sec.

[SheyenneStanley]

dude tryed it and it was sweet

[leadsalad4you]

whats wrong with a bench grinder.

[caleb505]

I did this to 22 lids in an hour and 45 minutes lol.

[joshcm1990]

Yo idk how it's not workin iv been doin it for like 10 mins now

And it's still not working

[redneckjwillo]

@joshcm1990 what kind of dip lid are u useing

[yesichewcope]

@joshcm1990 you just dont know what your doing. just bend it harder put a lot of pressure on em but dont fold em

[photoboy2005]

yeah ive got 3 of them on top of my hat i where everday... i need to point in out in a video.... im just that hickish :)

[funyun907]

ive got 342 of these i keep em all

[grizzlyman1488]

can it work with a grizzly lid



[MONSTER2831]

if your really hickish so he says, well let me tell you something brother.......FUCK YEAH WERE HICKISH ima d that and make a belt buckle and a fuckin new peice to my hat thanks! WHITE POWER YEEE HAWWW!

[jackgallaghersp4]

After I scored the winning goal with my morning spoon, I took my lax stick and a keystone light can and used them to pop out the center of all of my dip tins at once. Took me 3.7 seconds. Shit was so cash.

[bosshog871]

i wrap them around lighters

[WhisperInTheWindMvz]

You said 3-4 Minutes? Not like 12.

I can't even do it... Yet I'm only 15.

[yesichewcope]

@WhisperInTheWindMvz i timed myself at 13 seconds and im 13

[murderdolls00]

i wish i could do this but all i chew is beechnut.

[TheGiggity999]

ya fuck u making fun of hicks "yo can glue it on something if ur really hickish haha" ya funny

[cntryboyloves12gauge]

I just did that with my Copenhagen lid today. I love "Copenhagen" i dont like "Cope" yes theres a difference.

[MrJasonsecret]

if u look away and just listen to this video it sounds so damn wierd

[ChevyRidinHighK1500]

i make belt buckles out of my grissly lids i just gurilla glue it on there haha

[yesichewcope]

@ChevyRidinHighK1500 you can pop them out?!?!

[rgnsms]

If only i could masturbate that fast

[mmkellynv19]

Does anyone know where to find the old copenhagen lids (the ones without the damn warning labels on them)?

[southernboy55555]

@mmkellynv19 there aint no more, u just gotta hope sum gas station has em without it.. i hate all the new lids! i found a old snuff can and was like wow... i miss it lol

[jordancummings7892]

@mmkellynv19 go to google and look up old school copenhagen can lids and look around

[TheTrollHuntard]

i got a fucking blister...

[kashton1995]

Damn it took forever for you to do it

[fuertherbube]

That's what it takes to impress american ladies?

[Wake1151]

@fuertherbube YES, they will be all over you.

[mudhog81]

I can't do it I just end up with a warped cope lid what am I doin wrong

[loafbread99]

@mudhog81 bending too much its suppose to take time

[yesichewcope]

@mudhog81 everything

[HigginsAtHeart]

I did it in 39 seconds, wait I meant 3.9. All it took was whacking it with my penis.

[DURAMAXDIESEL185]

@HigginsAtHeart

your a retard

[HigginsAtHeart]

@DURAMAXDIESEL185 Joking around right?



[DURAMAXDIESEL185]

@HigginsAtHeart

no im not

[gwerner09]

I have a about 70 of those, and it takes about 8 and a half seconds for me to take one out

[jondiggityB]

i made a wind-chime out of cope long lids BEFORE the gay black label on the lid

[hdhsrebel]

If you will flip the can over and work that ring around it will pop out in well under a minute...........

[swantar66]

dude ima make a belt buckle out of that

[StubinsD]

i did it in 30seconds



[Manofbegging]

@StubinsD What, jacked your pa off?

[StubinsD]

i did it in 30seconds

[SouthernBoy30648]

u can make ornaments for your hat like put the can top under ur hook on ur hat lol thats what i do with mine

[SouthernBoy30648]

i done it with a grizzly lid before so it's not too thick. it just takes longer.

[jeepcrawler95]

@SouthernBoy30648 which grizzly cans have a metal top i do wintergreen and they aint had it

[BigDippin704]

....

[jmoranbeast]

Sorry to disapoint you dude but your not gunna impress a lady with a can of dip, lol,

[Cope4Life1822]

I've only gotten this to work once, I had to use a cope red, NOT green.

[tycocars]

i juss did it an onlu took me a couple mins not 4 haha but ty for the trick

[ryan129222]

actually easier to use a can opener haha but i did this again last night

[1minusU]

can you do that with any lid?

[swantar66]

IM GONNA DO THAT AND STICK IT ON THE HOOD OF MY TRUCK

[kevinhoffert]

man, i can do this in under a minute. dead serious

[nickorama22]

I'm guna try that right now

[mrfeelgud]

fukn rite..i made bout 11 n every1 says im a hick..fuk em

[rcyhaanr]

@mrfeelgud my friend has every center from every can he has ever had lol im pretty sure thats the definition of hick

[playaninja1]

I thought I was gonna be the first to say belt buckle haha but I guess great minds think alike!

[kevinmichaelmccarthy]

Chargersman77, thats tight dude, thanks for the idea

[884427726zb]

Well aint u juss a daisey.

[Chargersman77]

idk if anyone cares, but im 17 and i made a table with these, put the legs on, made the wood on the table and gently placed my empty flat lids on it, glued them and laid and sealed a peice of glass over the entire top., this keeps it flat and also you can admire the tins, :D

[bJm2008]

@Chargersman77 last time my buddy was home before he went to afghanistan, we were talking about doing that, try to figure out a way to use beer cans as legs, use cope lc lids as a background, and make a design out of cope wintergreen lids

[Chargersman77]

@bJm2008 i actually spelled " COPE " out in cope straight lids and surrounded the rest in skoal lids and it looks really cool...

[slimjim1]

damn man it aint a "chew" can its DIP! u must be a yankee hahaha

[Cope1877]

i cant do it..lol ima loser

[TheDDDeagle]

@Cope1877 Yep. :(

[DaltonArgue]

That shit so works. Remember sqeeze hard

[MonteLSV6]

Yeah, mouth cancer FTW

[Diehard64024]

damn dude i am going to go do it.

[intelligentjackass]

Dont' try and use a razor anybody. I fucked up the lid that way.

[twistedf3ar]

i just cut my hand i must be a real dip fuck lol

[broncridincowboy]

hey if u didnt no it works better if u bend it just a lil bit then it takes like half as long andit turn out just as good but dont bend it in half just bend it a bit

[sk8erboifrumwburg]

i gotta friend who can do it in less than 30 seconds

[moosey250]

i glued one on the front of my old dirtbike now im doing all my plastics on my new one. it will look like im sponsored by copenhagen

[broncridincowboy]

not all skoal lids work and ya cope is best for it... first few times that gives blisters if u do it fast lol my cousin does that in like a minute its amazing

[oOCHINAMAN16Oo]

HELL YEAH it took me 20 to do it with a skoal lid but i got it.. i got laid within a matter of minutes. its a real pussy magnet

[mlgburd62]

what bout the NEW grizzly lid?

[mlgburd62]

what about the new grizzly lids? ill try it =]

[cjgrovestreet4life]

did it work...im trying it but i dont know if itll work

[mlgburd62]

@cjgrovestreet4life i was doing it for like 20 minutes but i gave up and just took a razor and cut it lol. hit me up if you did it

[broncridincowboy]

@mlgburd62 i did it and if u squeeze it a bit harder it goes faster but if u do it too har it bends and u an bend it back out but then it gets screwed up

[ApexiDesign]

i tried it with a skoal lid and it didnt work

[alexstaticd3]

i just put them on my hat when im done

[McLean1408]

wow u got no life....just cut it..that would take like 2 seconds

[TheJohnb44]

that how long it takes me

[SaintOfSin21]

that would be fucking awesome!

[klowety]

I got these hot glued to my door.

[haiimstrobez]

hickish.

[laxwarwick22]

add more pressure, i just did a skoal lid in 30seconds

[xXpreflexXx]

that was the first thing i thought of lol

[boxxer6]

seriously...that sheet took you forever...i started at 35 seconds on your video and was done right at the one minute mark....YOUR SLOW maybe you should become a little more HICKISH

[TheXdzX]

One of the greatest comments I have read all day my friend lol

[GrantMan2008]

This is a great way to make a Chew Can Beer Pong table. My vid is coming soon

[bigpapac3]

nice i got about 50 skoal centers in my room atm lol

[copebuckle01]

check out my profile, i show you my homemade copenhagen belt buckle i made using this trick. thanks man!!!

[6916802]

nail that shit on the back of my truck!

[countryfarmer14]

what about a redman can ??

[copebuckle01]

redman tins are too thick. so are the grizzly ones. i spent over an hour one night playing poker trying with the redman. all i got from it was a lost game and a nice briuse on my hand from the lid. haha

[smithcycles]

no, ive tried many redman cans, it wont work for me

[PLKDN]

can you do that with barry blend it has a metal lid

[copebuckle01]

yea it works with all copenhagen n skoal lids.

[12valvecummins97]

if u give it a good bend without folding it it shouldnt take longer than 30 seconds

[ilcilp]

ur slow as shit. takes me 2 min tops

[zdog123dog]

awesome. wheres that gonna get you in life

[countrykid902]

umm, it has nothing to do with life, it just helps with stress, alot

[MarksmanFilms]

i fucking bend it every time!!!!

[kctanker87]

Does this work with the new Cope Wintergreen tins? Ive been trying for like an hour lol

[smithcycles]

yes it does, just squeeze it a little harder, but dont crease the lid

[muthabrucka]

Yepp, i just did it. Squeeze harder, that's all I did.

[xbox945]

yea the lids are the same just different colors

[Avyrus666]

Of course it does.

[spymasterwade]

belt buckle

[mtbbiker23]

hahah same bro

[Crazt101]

Can u do it with a skoal apple can

[smithcycles]

yes