LED explodes at 3 kV

[FalloutFanBoy101]

Hey guys i really need your help. I have this 330V 700uF capacitor out of a vintage camara flash and i was wondering if i could charge it in under 20 seconds with (number) of disposable camara flash curcuits. or if i could use a (number) of electric fly swatters?. what would be the better choice? (if u help i will sub)'

[TheStrategyGuy101]

wat betekent kV betekenen kunt u reageren

[RODALCO2007]

@TheStrategyGuy101 kV is kilo Volts oftewel 1000 Volts

[2klank]

@TheStrategyGuy101 fuckup hollander

[mimdotcc]

Heh, it's just gone!

[TheBullShitCompany]

when the led doesnt work at 2v, i testet it on a 4kv transformer, and it doesnt expleded

[RODALCO2007]

@TheBullShitCompany Does your TX maintain 4 kV.

How many VA is it.

If the led is dead short it may put the output voltage down of your 4 kV TX, hence no explosion.

[TheBullShitCompany]

@RODALCO2007

i used a 4kv an 0,8 A neon light transformer

[RODALCO2007]

@TheBullShitCompany That should be OK to pop the LED.

anything over 0.5 Amp should work.

I used a 4kV cable fault thumper which charges up HV capacitors to 3 kV and then release the full charge in one shot. About 200 Amps for 0.5 sec.

[TheBullShitCompany]

@RODALCO2007

200 amps for 0.5 sec is very much

[xato909]

nice firework :D

[jelledj]

oeh... xD

Vet stoer :P

Waar koop je die ledjes en explodeerd het ook zo goed met 230?

[RODALCO2007]

gewone 5 milimeter Ø ledjes van de elektronica shop.