Shit is nasty. An hey fuck head...13g is possible for just the motor. Ever hear about mazworx CNC block. It cost 10,000 just for the block! Then u figure cp pistons, Carrillo Rods I think good for 1000hp, bearings, oil pump, water pump timing chain kit, cams/cam gears, springs retainers, lifters, hks rocker arms, valve seals, valve guides, valves, head studs, head gasket. That easily puts you over 13,000! So know your facts before you speak.
obviously it would be 13 grand for a built motor you clowns!!, he said another 10 - 15 for bolt ons... meaning stuff bolted on the outside of the engine, my sr20 cost me 12 grand, plus 10 grand for bolt ons
@koukicrispS13 have you seen what its sitting in??? the weight to power ratio will be like 2hp per 1kg id like to see a supra thats faster than that...
@toddlertom01 It does look small but is rated to 900hp, its made by Plazmaman in Australia if you look closely you can see the frosting on the outside of it as it uses a ice box tank to cool it.
@philip22nz 13G just for the motor? if you're talking about building it, maybe. but there is no way the motor alone is 13G. I can go to a jdm engine importer in VA and pick one up with motor, trans, wiring, and ecu for under 2g. I'm just curious why you said 13.
@toddlertom01 its an air to water intercooler...shoulda just ran e85 or any type of methanol and did away with any intercooler system altogether....for a drag car :)
Sick SR20 no doubt! Although I'm not so sure it's such a great idea to have such high boost on a four cylinder engine...
LtDickWeed 1 month ago
thats a funny lookin 240sx.
youravantgarde 2 months ago
y'all are retarted its a water intercooler smh
1jzdrift1 2 months ago
Nice dyno...
If that cart had wings you would see a sr20 fly ... ;)
icdeademopeople 2 months ago
ill take 5!
Dudeman9339 2 months ago
Shit is nasty. An hey fuck head...13g is possible for just the motor. Ever hear about mazworx CNC block. It cost 10,000 just for the block! Then u figure cp pistons, Carrillo Rods I think good for 1000hp, bearings, oil pump, water pump timing chain kit, cams/cam gears, springs retainers, lifters, hks rocker arms, valve seals, valve guides, valves, head studs, head gasket. That easily puts you over 13,000! So know your facts before you speak.
JaysPerformanceParts 3 months ago
obviously it would be 13 grand for a built motor you clowns!!, he said another 10 - 15 for bolt ons... meaning stuff bolted on the outside of the engine, my sr20 cost me 12 grand, plus 10 grand for bolt ons
badgersr20 4 months ago
You know what's even sexier than a sr20det, a rb26dett 8===D-- ---- -
JimmyEG1 5 months ago
@JimmyEG1 oh yeaaa
CaptainKnuck 5 months ago
Jeez dude thats one big ass turbo lol
vortech17 5 months ago
Supra killer if that was in an s13
koukicrispS13 5 months ago 8
@koukicrispS13 have you seen what its sitting in??? the weight to power ratio will be like 2hp per 1kg id like to see a supra thats faster than that...
SprntrlDeathNinja 2 months ago
@koukicrispS13 Maybe. could have some traction issues, but I would still rather drive the S13 ANY day!
87PROTOTYPE 1 month ago
Okay, I noticed that core si so fat. Also ice cooling system as well?
Absolut killer machine mate.
toddlertom01 6 months ago
why is an inter-cooler is such a small size? Anyway, this is a killer.
toddlertom01 6 months ago
@toddlertom01 It does look small but is rated to 900hp, its made by Plazmaman in Australia if you look closely you can see the frosting on the outside of it as it uses a ice box tank to cool it.
philip22nz 6 months ago 5
@philip22nz how much did it cost to buy this motor and modify it?
redghost105 5 months ago
@redghost105 For just the motor is around $13,000 plus all the bolt ons
philip22nz 5 months ago
@philip22nz how much were the bolt ons?
redghost105 5 months ago
@redghost105 There would be around another 10-15g in turbo, injs, ecu, fuel system, intercooler, intake etc
philip22nz 5 months ago
@philip22nz 13G just for the motor? if you're talking about building it, maybe. but there is no way the motor alone is 13G. I can go to a jdm engine importer in VA and pick one up with motor, trans, wiring, and ecu for under 2g. I'm just curious why you said 13.
anth4484 5 months ago
@anth4484 can you get 800 wheel hp from a $2000 sr20? The machine work alone would take up a decent chunk of that cost.
LP187q 3 months ago
@philip22nz Jesus you got ripped off, lol. My SR20 only cost like 700 dollars :-D
UsedCrx 5 months ago
@philip22nz what is the thing its sitting in? some kind of crazy go cart... holy shit that gonna be fast. you guys are crazy... :)
SprntrlDeathNinja 2 months ago
@toddlertom01 It's a chargecooler = water to air intercooler
wakkadakkaify 2 months ago
@toddlertom01 its an air to water intercooler...shoulda just ran e85 or any type of methanol and did away with any intercooler system altogether....for a drag car :)
Duckyistrippin 1 month ago
Is that a det head or a Ve head?
yehbut1 6 months ago
@yehbut1 GTIR head
philip22nz 6 months ago
This is a specially built engine and thats the only way you'll get to 800HP. A standard engine may stretch to 500hp or so but thats about all.
turbostock 10 months ago
Comment removed
Spqu 6 months ago
How much would it cost to tune a stock engine like this to 800 horsepower?
redghost105 10 months ago
you're going to need a lot more than tuning to get a stock sr20det to 800hp
peniles2404lyf 5 months ago
is it just me or this engine looks different from a sr20
looks bigger
its not a ka thats fersure
ede91311 1 year ago
@ede91311 nope seen this car in person and it is 100% sr20
counteja 11 months ago
Hey Robbie. Without NOS (As dyno'd) will be EE. With NOS will be DD but going to try without first. Might be a bit slow to spool without NOS.
turbostock 1 year ago
NIce one, look forward to hearing how you get on, what class has it beed classified for?
RIPSNZ 1 year ago