Why did it take you to discover the enigma so long you ask? Well because you were likely a class A student, molded by the faculties of deceit. Now what would it entail for you to build a larger model for "home" use...;)
Hi Patrick, U mentioned somewhere that the pulser charge holds better. What type of termination charge voltage do you use for using the cap pulser? 13.8v- 14.5v?
depends on the size of your SSG and it's output. Simple rule of thumb I use is, if it is dumping more than once per second, you need a bigger cap, once every 5 seconds, you need a smaller cap. somewhere in there you will find the dump your battery likes.
Oh yes, this will also depend on the size of the battery you are charging...if the battery is too big for the dump, you might never find the right size cap.
What happens if you short the generator coil briefly enough to prevent current from flowing beyond the reactive curve of the inductance, and recover that to the battery?
That's the ticket right there. this is a sloppy setup, someone with some brains and some know how should be able to take this put it on the store shelf and lets get on with actual living already :-)
there is so much more that can be balanced and optimized so much more that I do not even mention right in plain view...
The answer is: Nice spikes with low drag, I recently made a generator. It stops immediate if you short it because its has nice high coupling, but simply using a reed switch it does it with low drag. New video coming before new years!
Is there a link to see the circuit diagram of the "cap dump" you have working with the SSG ?
alannowod 2 weeks ago
@alannowod
yes, google "John Bedini's School Boy Motor"
Thanks :-)
min2oly 2 weeks ago
Hey Patrick,
Very impressive. Do you believe back popping the primary via a cap dump is recovering more energy than just shorting the coil?
Regards
Dan.
Damadarfury 1 month ago
Why did it take you to discover the enigma so long you ask? Well because you were likely a class A student, molded by the faculties of deceit. Now what would it entail for you to build a larger model for "home" use...;)
Begbucks 2 months ago
Hi Patrick, U mentioned somewhere that the pulser charge holds better. What type of termination charge voltage do you use for using the cap pulser? 13.8v- 14.5v?
shadowless09 2 months ago
@shadowless09
most of my batteries prefer 14ish
w/ cap pulser 13.5 seems to do it. I have not completed as many runs using pulser as I have w/ direct radiant.
min2oly 2 months ago
@min2oly Doing test run now. Using a 150uf 400v cap pulser directly from the SSG output. Any advice on the cap size?
shadowless09 2 months ago
@shadowless09
depends on the size of your SSG and it's output. Simple rule of thumb I use is, if it is dumping more than once per second, you need a bigger cap, once every 5 seconds, you need a smaller cap. somewhere in there you will find the dump your battery likes.
Oh yes, this will also depend on the size of the battery you are charging...if the battery is too big for the dump, you might never find the right size cap.
min2oly 2 months ago
@shadowless09
Hope that helps, I'm sure there is some math in there somewhere, perhaps some one so inclined can comment :-)
Patrick
min2oly 2 months ago
What happens if you short the generator coil briefly enough to prevent current from flowing beyond the reactive curve of the inductance, and recover that to the battery?
Shanjaq 2 months ago
@Shanjaq
That's the ticket right there. this is a sloppy setup, someone with some brains and some know how should be able to take this put it on the store shelf and lets get on with actual living already :-)
there is so much more that can be balanced and optimized so much more that I do not even mention right in plain view...
thanks for checking it out,
Patrick
min2oly 2 months ago
@Shanjaq
The answer is: Nice spikes with low drag, I recently made a generator. It stops immediate if you short it because its has nice high coupling, but simply using a reed switch it does it with low drag. New video coming before new years!
JP
UrCoffeeTastesToasty 2 months ago
nice clip, thanks!
would it be possible to get the cap dump circuit from u.
GeorgeyNico 2 months ago
@GeorgeyNico
no problem, very simple take a look at the "negistor" google it.
there is a recent post on bedinimonopole2 at yahoo groups.
Thanks,
Patrick :-)
min2oly 2 months ago
@min2oly Cheers, thanks for help, it's something that I'll try first chance i get.
GeorgeyNico 2 months ago
Patrick,
2 thumbs up for this one, some hurtles i've been trying to get over!
Thank you, Thank you, Thank you.
David
SeaRain1 2 months ago