Dogleg Stock Installation for Tippmann A-5

[Josephthecrazyguy]

where can I get this stock?

[Homevidz1o1]

why did you remove your squishy paddles? i saw red paddles in your cyclone.

[Homevidz1o1]

do you recommend this stock?

[gfxjedi]

Did the dogleg stock come with the foregrip shroud and the short remote line tube (from tombstomb to stock)?

[paintballcrazy94]

I just recently got an A5 with this dog leg stock on it in a trade for another gun,

quick question does the remote line adaptor when connected to the stock dig in at all in your shoulder or armpit? it seems like it would

dont got my own remote line yet so havent tried it

[Hyperballin]

You dont need to do the whole co2 line wrapping against the gun right? Cant you just install the stock and thats it?

[NUKEKILLER25]

where did you get the dog leg stock and stock adapter ive been looking one for eons to go on my a5 but it is no where to be found

[MortiferFain]

Hey i was wondering if using a q-loader with your set up is recommended. I am not picky about much things, but man i cant stand my hoppers on the top of the marker. I am all about having the top of it free and clear except for a reddot or similar sight.

[AmalgamDan]

you are an awesome person for doing this video. I am new to paintball and I have decided to go for a setup similar to yours, but I was clueless on how to go about doing it. But now I know!

[evmister94]

the rubber pad things are called gaskets btw

[angrymuffin123]

do u really need teflon?

[yodakiddgg]

nope just bought 1x30 tactical red dot site and had a stock on it / collapsable/ and just found out cant look though sites with mask on.

Yes i have a Tippmann A-5

[KristianWGeorge]

How difficult is it to aim down the sights with a mask on with a regular stock, like a Commando or Collapsable stock?

[macsgo2hell]

@KristianWGeorge i dont think you can, unless ur mask got a soft chin or soft ears, then the nask maybe able to flex to look through the sights

[SirChubblesSteen]

Impossible, as the mask is too big to aim down the sights, however youll be able to look down the top of the gun but really only with the Commando.

[sk8terhumes12345]

impossible...

[sk8terhumes12345]

does it come with the spec ops forgrip?

[SirChubblesSteen]

Yeah it comes with the foregrip.

[crossfire6424]

What is the name of that space he put in between the stock and marker for the stock wont move?

[malicios]

Do you need to get a remote cord for this?

[TeamPaintPanthers]

Yes

[SirChubblesSteen]

Yes you do need a remote line.

[jakvbkr09]

where do u get the red dot and is it expensive?

[wowuberaddictt]

don't get a red dot you really don't need them for paintball

[MexicanKiwi1989]

You're the man, man!

[TeamPaintPanthers]

Where can i get one of these grips??

[malicios]

They are Hogs Den Pig Skin Grips. Just google it.

[TeamPaintPanthers]

I got em now. They are great!!

[tacoboy15]

hey dude im having a problem with installing my adjustable CAR stock on my a-5. The instructions say to put the o-ring that it came with on the back of the bolt and not on the stock itself, is this right? thanks

[KRASHARPSHOOTER]

Yes it is. That O-ring will act as a shock absorber or buffer for the stock.

[gmoneysexbeast145]

please message me info on that custom grip i saw [not the foregrip]

[on3shotkilla]

y do u need teflon tape

[SirChubblesSteen]

It's so that there is a better seal to prevent Air/CO2 from escaping/leaking.

[woddsball]

I heard that when you put a S.O. air thru stock on you have to drill a hole beside the where the tombstone goes. When I heard this, it was for the commando stock. But do you have to get some variation for this stock so you can install the stock without drilling in the reciever? By the way your videos are awsome!

[KRASHARPSHOOTER]

The Old style of SO stocks sometimes required you to drill a hole for the airthru capability to work. All the current stocks assemble without any modifications.

[woddsball]

Thanks.

[SirChubblesSteen]

"Rubber pad.. things" Lol.

Nice vid. Nice gun.

Just like mine :D

[SirChubblesSteen]

Samesies, my A5 is exactly like this, minus the red dot though.

[gitdatcash126]

this is off topic, but i have both a CO2 and Compressed Air tanks for my A-5.. im just wondering. if i use CO2 while chrono-ing my gun...and i got out on the field..lose CO2 and switch to Compressed Air (and vice-versa)...wat am i looking at as far as a change in velocity? would u recommend such an act during play?

[KRASHARPSHOOTER]

Nope. you should recrono every time you change your air source.

[gitdatcash126]

thanks alot.. ok so now i have another issue.. i just recently switched to Compressed Air.. b4 this i was using CO2 with a Remote Line...now that i've dont use the remote line and just the stock gas line..i find that it screws in too far into my tombstone and isnt set properly. so now when i hook up the air it leaks right out.. how can i fix this?.. do i need a new hose?

[KRASHARPSHOOTER]

Is the place were you screw your tank in under the grip? That would be the ASA, not the tombstone. If this is the case, I would call Tippmann and they should send you out a new ASA. I had this problem with my ASA. It worked fine with some tanks, but others would just leak. Switching ASA's fixed the problem.

If you are talking about the tombstone(the part in front of the trigger), then you will probably need to contact Tippmann and have them send you a replacement for that.

[gitdatcash126]

much appreciated.. it involves both actually. when i scerw the gas line into the tombstone the fitting goes in about a half turn too far..which means that i hav to loosen it if i wanna hook it into the bottom of the grip.. so i guess i def gotta call tippmann then.. i was hopin i wouldnt have to and that maybe i could adjust it myself

[taylorwigg22]

can you buy doglegs without the air-thru?

[KRASHARPSHOOTER]

Unless you find them used, no. Stocks without air-thru are not made anymore.

[paintballster]

now I understand thankyou for explaining. s.l.

[paintballster]

Is the stock made out of plastic or alumnim. And how tought would you say the material is??? thx. s.l.

[KRASHARPSHOOTER]

As far as I know, all versions that are currently sold are the plastic composite. The originals were aluminum and will pop up on eBay occationally.

I've been using my stock for almost three years and it's still going strong. This stock can take a lot of abuse. I do tend to baby my gear so that it will last a long time, but I have abused it on the field without any adverse affects.

I've only heard of one story of a broken Dogleg. It snapped in the cold when the guy slipped on the ice and fell.

[paintballster]

thanks... by the way what do you mean but over tightning the 90 degree and it snapping??? thanks s.l.

[KRASHARPSHOOTER]

When I originally put the 90 degree fitting in, I put a little to much Teflon on the threads and tried screwing it in to far. This cracked the plastic and caused the stock to leak. I payed to ship it back to Special Ops, and after they fixed it they shipped it back to me at their expense. I had it back within 2 weeks.

[paintballmarksmen]

hey, quick question. Do you know where i can get one of the "shims" or spacers for the stock by itself? I have the car stock and it's a little wobbly and have just been using pieces of tape and shoving it there but i think a shim or spaces would work better.

[KRASHARPSHOOTER]

They came with my stock, but you can check Specialopspaintball. com for them.

[vandalsandsuch]

ive seen that sight on call of duty 4 lol

[savageZA76]

Could you tell me what kind of sight you have on that marker, and comment on its affectiveness. Thx

[KRASHARPSHOOTER]

That is an NcSTAR D4B holo sight.

It is very easy to clean, it has been hit multiple times and never been damaged, battery lasts forever. I can hit a person at 75 feet 95% of the time.

Only down side is that it has to mount on a picitinny rail. I use the Special Ops Flattop Rail on mine.

I have a video showing off my setup that will be uploaded in the next day or two.

[PBkid42]

what rail are u using?

[KRASHARPSHOOTER]

Special Ops Flattop Rail

[PBkid42]

Hey, great vid, you just helped me pick a stock for my A-5, i havent talked to you in a while, how ya doin? =)

[McLOVINMike]

no the vertical trigger grip.

[Amundson29]

Awesome! Thanks.

[Amundson29]

Good job. Right now I have the A-5A2, but really wish I had the dogleg. I would like to see a video of your set up. That would be cool.

[KRASHARPSHOOTER]

Yeah, I'll be getting a video of my setup up at some point. Hopefully sooner than later.

Look for it next week. ;)

[McLOVINMike]

is that a new a5 handle? if it is can you tell me what it is?

[SUPERCREG1990]

i think its the A5 handle grip skin

[KRASHARPSHOOTER]

I'm sorry, you meant the Trigger grip. That is a rubber slip on grip made by Air Hog. It is really nice. I think you can get them at hogsden. net

[pb4evr]

im thinkin about getting that