stan meyer diagrams

[kosta9499709]

if you wonna all stan patents inbx me!!!!

[chasson321]

@sk8tergnome87

[Itsmeeman1]

Meyer's 'electrolysis' was not the same thing that HHO people use. He used Chemalloy for his metal and resonated it at between 15kv and 43+kv to make it 'sing' the atoms apart. Chemalloy has some allegedly unique qualities, such at creating and sustaining it's own 0.55v charge when in water, and naturally splitting H and O from water when a tiny charge is applied. Who knows if any of them were true?

[jjpcondor]

Classical Faraday electrolysis requires adding electrolytes to the water, such as sulfuric acid, to support the conductivity. Mayer electrolysis was completely functional with clean distilled water.

[jjpcondor]

Mayer has developed a practical way in a very controlled process of water electrolysis to create HHO gas with very LOW milliampere currents. But where is the normal Faraday type of water electrolysis requires flow of current to be measured amperes, the Mayer electrolysis is done with low milliampere currents.

[jjpcondor]

tvinx.com/automobil_na_vodu_ne­ćete_voziti.news.1973.hr

[dddproject]

can anyone email these drawings? please. i really want to read them. thanks

[scirustech]

Where can i go to get documentation on Stanley's work. I understand either some or a lot has been confiscated by those who want to kill this technology. But the more this gets out the better, and who knows maybe in time we all be able to look back and appreciate those pioneers who worked so hard like Stanley Meyers.

[lieberman70]

Hi,

I found essential information! The Condensator must collapse, i.e. the Electrodes will shortcut by producing a spark!

This means that the distance between the electrodes, so the gap between the 2 tubes that form the condensator determines what Voltage must be in the resonant circuit!

The Resonant Circuit is a High Voltage circuit. Try operating the Resonant Circuit at around 5000 Voltage (Could be lower in water, experiment!).

The collapse will cause the resonancy!

[angusmac292]

Hi There, does anyone know the name of the Music as its such a nice composition

[batteryphil]

No, I got it from youtube, had to audio swap

[lieberman70]

Hi,

This is the setup of a serial resonator.

The PWM works like the cat in a tradtional clock driving the pendulum (which is the coil /condensator(=elektrodes) /Coil circuit). The cat is the part in the clock that pushes the pendulum at right times to either side. Here one. If the energy transfer is small it'll drive the pendulum up over time to maximum in contrast with to maximum at first push.

After it reached maximum one lets it pendel out and start over. This is the principe.

[lieberman70]

The period it pendels out (the long off period of the PWM) is the energy gain over that of normal DC electrolyse process.

Interesting is to use the diode to prevent the backwave from the resonator going to the PWM. One now does not need to stabilise the PWM that much.

Also interesting is too that this will never work with low amperage /Voltage since the high resistance of coil and condensator will cause the system to collapse.

Oscillation graphs of Tesla coils are similar.

[batteryphil]

I found these online and make no claim to their accuacy. I am not very good at circuits so i HAVE HAD NO SUCCESS MY SELF. But I give this info away freely without obligation or claims. It may not work but then again it may!!!!

[sxcHideki]

nice one.

[OldnickUA]

Wery interesting!

[wolflorddan]

please forward me a copy. This looks close to the firestorm spark plug tech.

[misterbeefy33]

please forward me one as well~! the link in the video doesn't work :(

[theoneagain]

stanley was a hydrogen wizard SHAME HES GONE

[theoneagain]

who knows how to build a voltage intensifier circuit this is the missing piece to the puzzle extremely hight volts and low amps pulsed 20000 volts

[crob227]

maybe i got it , fould you look at this video i got it my series called Resonance spark dry cell, please check it out.

[TheIronStark]

in my joule thief I'm using it for the hho.

look my last video!

[sinisasokolovic]

@theoneagain Buld a transformer. With 100 turns on primary and 1000 on secondary u get voltage ampilification of 10... play with the ratios and u easily get 20k volts out of 12v DC pulsed :)

[Leuopold]

@sinisasokolovic Anyone ever thought of using a car ignition coil? all the hard work has been done for you.

[sinisasokolovic]

@Leuopold Ignition coil is pulsed DC (voltage is hight because of collapsing mag. field in secondary winding of the coil) and you can't control the current

[crackahcrackah]

@theoneagain It's all based off of Tesla's high frequency patents such as 462,418. It's gonna take some research to understand it. Look at that patent to get an understanding of what Meyers was doing.

[Leuopold]

@theoneagain No it's not. 20000 volts would conducts straight across the plates no matter what current. Speaking from experience.

[slushomatic]

@theoneagain it pulsed at 20K cycles per second not volts.

[batteryphil]

email me and I will send you a copy!

[cribcat1]

I'd like a copy as jwsoup said and the name of the first band.I already have the Loc cd.

[suprafastinamk3]

If we all work together on this one then perhaps we can losen the strangle hold the middle east has around our necks! So would you be kind enough to send me a copy as well? Thanks

[jwsoup]

are these really stsan diagrams where did you get them I am very interested in his h20 fracture device I have an idea of what he was working on but would like to have some conformation

[batteryphil]

I know you cant see this very well. But send me your email and I will send a full copy to you!!!! Also I dont understand most of it, so any input and explanaions would be much help!!!