The greater than chip is not needed. If the value is higher than 0 then whatever you are trying to activate will be activated. Also you can use turrets. And if you do some more chips that I really don't want to explain right now you can make them get propkilled. Thanks for the video!
why after i download svn wire full and do every thing like the wire fourm says and i got to try then i can't use any tool from wire everything errors!! plz help me
I used this tutorial a while back and loved it so much that 3 months later when I learned E2 I turned all the chips into just 1 E2. So all you had to do was wire the 4 rangers, explosive, and indicator to the E2 and everything worked perfect. Even made it better by making '/on' and '/off' commands instead of a button. :) Just wanted to thank you for the idea. :)
nice tut im a newbie on gmod10 and wire and u helpen me very much but it was REALY hard to understand you so if u make another tut playe put your volume on!
A few years ago, two parents went out for dinner. A few hours later, the babysitter was calling to ask if she could cover up the clown statue in the kids' room, the father said,"Take the kids and get out of the house. We'll call the police, we don't have a clown statue." The "clown statue" is really a killer that escaped from jail. If you don't post this letter on to 10 videos tonight, the clown will be in your bed at 3:00 am with a chainsaw in his hand;sorry i didnt want that happening to me
i downloaded wire mod but i don't have buttons, which is like the main thing for wire mod, can u give me the link for the wire mod u downloaded or help me
can please some one help me!! i have a new awsome comuter! i can spawn unlimnted props without lag. but when i come to lasers and spawn a laser it lag like hell! does anyone know whats the problem (i have tryed to set my graphics settings to low on all but still lag) please help me =)!!
If only there was a massive index of the internet where you could type in what you were looking for and it would give you pages of results. I think I'm going to invent something like that and call it a "search engine"
Works great :D... but I have a problem with wire button tool, I see no toogle on/off or any button skin :(... I see just Defalut :| and the button is a clock without toogle on/off... can someone help me with this pls.?
dude, there is still a way to get in. you can just stick a plate in one of the path of one of the rangers and freeze it. that way, the bomb won't reset, thus not blowing up again. watch orb's 18 tutorial to fix this.
for some reason when i look at wire objects it doesnt shoe me stuff like what plus what equals what. how do i get the tan "speech bubble" looking thing that tells me what the output is going to be?
there is another way but u need laser stool and keypad stool u wire a button on inside and keypad on outside to an add (make sure the keypad is set to valid is -1) then wire the lasers to the add
Finally I can do something useful with Wire, thank you very much for the tut. You weren't 100% clear on everything but by listening carefully and watching you're screen I was able to figure it all out. Thanks again!
watching this for now.. u messed up. u were not suposed to wire the ranger X to the add chip. U wire the Add chip to the rangers. like ADD a to the first ranger. ADD B to second. ect......
mine dosnt work :( and it dosnt permanently arm? i wired all x's of the rangers to the add A,the A greater than to the add A and the multiply B to the greater than,and the button to the the multiply and the indicater to the button what did i do wrong???????????????
I built the security system,and it works great! But I was wondering if you could make another tutorial on how to make a way to arm/disarm it from the outside using something like a password activated keypad. Just to kind of build off from this tutorial.
gmod 10, u get it from steam for 10 dollars, if u own a source game, for example counter strike source, half life 2, team fortress source, day of defeat source
good vid. learned a few tricks. i just guessed the range, but I never though of using the ranger to find them! but the only problem was the sound. other than that, good job
what did u say???
theinsomniacvideos 4 months ago
The greater than chip is not needed. If the value is higher than 0 then whatever you are trying to activate will be activated. Also you can use turrets. And if you do some more chips that I really don't want to explain right now you can make them get propkilled. Thanks for the video!
Mariolover24 5 months ago
@TheLeetMuffin mostly in rp you cant have explosives so XD
legomastera 9 months ago
the muffin is a lie! ITS A BUTTON!
rpgsolider 9 months ago
they can be smart...
take a prop
climb on it(make a ladder from props)
skip on your lasers joyfull =D
rpgsolider 9 months ago
idk why you didn't use OR and AND gates but both work I guess. :D
Trenonian 10 months ago
Google:
garrysmod svn wiremod
Mehmet619 1 year ago
i thought you were teaching us how to make a security base, not math
thelonewolf997 1 year ago
This was the first wire tutorial i ever saw :D
now i use e2 tho but meh
xXalteranXx 1 year ago
This has been flagged as spam show
why after i download svn wire full and do every thing like the wire fourm says and i got to try then i can't use any tool from wire everything errors!! plz help me
othmanajam 1 year ago
wow just wire a wire explosive to the ranger dist simples?
TheMrBuBB13s 1 year ago
@TheMrBuBB13s i put turrets if there are any in the rp server :D i thinks its easier
MrViCtOr223 1 year ago
wish i had this game but im shit at this kinda stuff lawl
TheKillingducks 1 year ago
@powerplugg do you have a fucking brain 2 year old? the title says Garry's mod!
daniwan3000 1 year ago
Thanks for the tutorial, It really helped.
superme9000 1 year ago
I used this tutorial a while back and loved it so much that 3 months later when I learned E2 I turned all the chips into just 1 E2. So all you had to do was wire the 4 rangers, explosive, and indicator to the E2 and everything worked perfect. Even made it better by making '/on' and '/off' commands instead of a button. :) Just wanted to thank you for the idea. :)
readicant 1 year ago
what if you walk through it?
thatgreggguy 1 year ago
I know it's a stupid question, but what version of Gmod is this? Is it 11 or..?
AsbjornTheGreat 1 year ago
@TheLeetMuffin lol i made that thing in the front of a shop xD the owned left, and i took it.
PS: i dont know how do make a shop
ToomasTamm 1 year ago
i think mine is messed up. it blows up whenb i arm it!
kennysc12 1 year ago
please add and teach me. ign is kennyclark101
kennysc12 1 year ago
a b0mb y d0nt u f1r3 y0ur laz0r? lololololololololololololololol
infectedbyflood 1 year ago
@infectedbyflood
wat
LRMANIA 1 year ago
@LRMANIA A bomb? Why don't you fire your laser?
lololololololololol
infectedbyflood 1 year ago
@infectedbyflood
k my reply was only for some randomness lolololololol
LRMANIA 1 year ago
what map is it that this tut is set on becasue iu been looking for that map for ages but cant remeber what its called.
enrobsor 1 year ago
@enrobsor An older freespace version.
ninjablooper 1 year ago
does the wire mod a part of mg or do you have to download it
tylerjustin97 1 year ago
@tylerjustin97 Download it.
KipStrangeman 1 year ago
@TheLeetMuffin I tryed this and it blew me up when some one opened a door :0
SirGreenGrim 1 year ago
is it possible to have a light on both the inside and outside of the building?
TraxCreations 1 year ago
@TraxCreations Yep.You wire them to the same chip just different side of the door for the indicators.
KipStrangeman 1 year ago
the music was a little distracting
Shadowcluch 1 year ago
i thought at the beginning somebody was singing then i realized you were talking lol :l
Raiden738 1 year ago
This has been flagged as spam show
i have wire mod but i dont have the little lines on the props and stuff. is that somthing else or do you have to activate it or what?
TheStonerCircle 1 year ago
laggy
70MrKitty 1 year ago
untoggled button = missing face
IDOG321 1 year ago
I love the music, but for some reason the sound of both your voice and music are VERY low. Nice job anyway!
Mewkip 1 year ago
wt map is that???
ravenous681 1 year ago
This vid would be better without music
Harvey529 1 year ago 2
Remove music i cant hear you almost..
Tom260398 2 years ago
how do u disarm it from the outside?
hoboeymusic 2 years ago
put a another button outside.
keeligirl 1 year ago
@keeligirl Then other noobs can press it ..
MrZkate 1 year ago
@MrZkate Ya if they on your prop prortection
keeligirl 1 year ago
This has been flagged as spam show
@MrZkate Ya if they on your prop prortection
keeligirl 1 year ago
wat map u on
bshma 2 years ago
how would i arm and dis arm it from outside?
snakeconsert 2 years ago
(secret)
Tom260398 2 years ago
how the hell you got that many items pls pm me
skrili 2 years ago
man, i cant hear at all
And yes i haev my speakers on full volume.(they are Laptop speakers though)
Flyingstarstorm 2 years ago
dude the music is annoying :/
wowrules39 2 years ago
Ohh.. I got the world famous question.. What map is that?
Blueduckraider50 2 years ago
that multiply thing is clever. thanks for makin the tut! btw, I heard you fine.
MooseRider 2 years ago
Jesus guys just turn the volume UP!
nesuprantunk 2 years ago
JESUS CHRIST SPEAK UP POR FAVOR!
and there IS an easier way to get the same affect
figured it out on my own
1stHALO 2 years ago
sorry man but ure fast and that sucks, like ure voice
DarkAnima270 2 years ago
speak like a men I can't ear you
7h3m0 2 years ago
@7h3m0 Type like a human we cant fucking understand you.
SteamMaster1 2 years ago
Speak up plz
lol
SeXeHRD 2 years ago 17
It's hard to believe that wire mod is based solely on math, but the logic of it all sometimes confuses me. :P
OriginalLemming 2 years ago
jesus christ man speak up!
OODDLuke 2 years ago 2
turn your volume up, I heard him
UchihaMizika 2 years ago
How do you get that red dot for your tool gun?
jakey150 2 years ago
Its not a dot. When its read it means that whatever hes lookiing at is already wired to something.
Eny4lius 2 years ago
easysnap or line that
Illu07 2 years ago
its called smart snap and it shows you the center of the object as a red cross. Very useful for building
fkdlrj603 2 years ago
i cant hear u
kaiknibbs 2 years ago
when i look at wire its like a diffrent language to me
djjohn99 2 years ago
Its simple math....all of it.
OMGitsFMA6666 2 years ago
nice tut im a newbie on gmod10 and wire and u helpen me very much but it was REALY hard to understand you so if u make another tut playe put your volume on!
Illu07 2 years ago
dude just make the lasers invisible and make it so there always on unless u press numpad 5 then wen u walk thru the door hold down numpad 5 duh!!!!
lanlo4 2 years ago
Too bad lasers can't outsmart bullets/grenades/nukes/rockets
slashsnemesis 2 years ago
I CANT HEAR YOU...can someone tell me what hes doing?
joannB66 2 years ago 2
TURN UP THE VOLUME...hope that helps
Somehomelessguy1 2 years ago 3
i got banned for using this on admin.....
TheCheapThrillShow 2 years ago
make sure to put beams all da way to roof too
onthetuber 2 years ago
That would make sense to put beams to top. Because of where someone could spawn a ramp and jump over it.
UP9390 2 years ago
very well done dude.
Tereto 2 years ago
HAHAHA anti noob device
arnaudking666 2 years ago 2
Yea
BoBakkenLives 2 years ago
How do i get all these wiring tools do they come with Wiremod?
FretRipper16 2 years ago
of course...
CrazyMonkey124 2 years ago
OMG I CANT HEAR THIS GUY....
OlloX3 2 years ago
Great video ;)
xSP3CTREx 2 years ago
AWSOME IT WORKS!
Amatoposters 2 years ago 4
what if you want a keypad on the outside and if u get the code right it disarms the defenses
TheRaconteurs1234 2 years ago
This has been flagged as spam show
A few years ago, two parents went out for dinner. A few hours later, the babysitter was calling to ask if she could cover up the clown statue in the kids' room, the father said,"Take the kids and get out of the house. We'll call the police, we don't have a clown statue." The "clown statue" is really a killer that escaped from jail. If you don't post this letter on to 10 videos tonight, the clown will be in your bed at 3:00 am with a chainsaw in his hand;sorry i didnt want that happening to me
prayforme111 2 years ago
omg my rangers put the distance 726 if i put the max legnt to 726
TINKONPOOPKORNER 2 years ago
Maybe they don't point at a wall ? If they don't... air doesn't stop them so they go to the max.
MadnessDays 2 years ago
what is the map and couldn't you use a "value -1,0,1" chip instead?
CnCGman 2 years ago
i cant hear you through the static due to you talking so quietly
cammanderWho 2 years ago
what version of garrys mod is? 9,10 or 11? (or even older?)
dennisvlachos1981995 2 years ago
10 or 11, Certainly not 9.
Skibiliano 2 years ago 2
holy shit this is advanced stuff, good job!
teckim 2 years ago
This has been flagged as spam show
what recording program did you use please reply
xXalteranXx 2 years ago
fraps, gamecam or hypecam, i think
dennisvlachos1981995 2 years ago
yeah alk louder..
johnpettet 2 years ago
ty man
HardstyleHabbo 2 years ago
can u do this on gmod9?
redjonathon 2 years ago
Sadly, No.
Skibiliano 2 years ago
you can use a numpad input instead of a button then you use one of the numbers on your keyboard :)
Nazror 3 years ago
What does a numpad input do?? never found out
mikkelr1225 3 years ago
if i'm correct numpad input will make like a thruster work if its wired to it with a number key, so pretty much its like gmod with no wire.
MrWaffleMast3r 3 years ago
cool, but DAMN that's confusing
lightspider 3 years ago
jake then just use Numpad input instead of button -.-''
kiloju135 3 years ago
i downloaded wire mod but i don't have buttons, which is like the main thing for wire mod, can u give me the link for the wire mod u downloaded or help me
tac0pwnage 3 years ago
i think u might night wire models pack
tomyverce4 3 years ago
Now wat would u do if u wanted to get in then how would u dis arm it if u had armed it then died how would u unarm it?????
jakeowens1990 3 years ago
Don't make a shitty base and people won't get in and kill you.
iatesnoopy5 3 years ago
problem! the beam doesen't show even if i have show beam checked!
Greydude96 3 years ago
i think i might have an older version of gmod10 cuzz i dont got ranger tool and stuff like that
j4c0b100 3 years ago
You normally need to download some of the items, even tools.
donutb37 3 years ago
the sound is VERY LOW
I had to max my speckers to here him talk
LOL :-I=
brettanelson 3 years ago
How do i make NPC's Come towards me
they seem to just stand still :(
Trav164 3 years ago
turn AI on
Dan4157 3 years ago
i mean npc
SpeedDemon14pwndyou 3 years ago
great tutorial - how u able to move the ragdoll?
SpeedDemon14pwndyou 3 years ago
its a npc, not a ragdoll, should be a bar at top for em ^_-
solar601 3 years ago
i get the same with screens wich sucks cuz i use em alot :(
zombiekiller555 3 years ago
can please some one help me!! i have a new awsome comuter! i can spawn unlimnted props without lag. but when i come to lasers and spawn a laser it lag like hell! does anyone know whats the problem (i have tryed to set my graphics settings to low on all but still lag) please help me =)!!
sl4ayer 3 years ago
Where do you download wire mod?
m3p0wnu 3 years ago
If only there was a massive index of the internet where you could type in what you were looking for and it would give you pages of results. I think I'm going to invent something like that and call it a "search engine"
excaza 3 years ago 14
LOL xD.
Lewissnicholls 3 years ago
idk if its me, but this is the only video.
Dude Talk louder!! i heard absolty nothing while it was playing LOUDER LOUDER! like im not saying it in a bad way just giving adivce
13loodshed 3 years ago
does wire mod work for gmod 9.0.4
mr123red 3 years ago
Get gmod 10 its 10 DOLLARS
DeltaUnitProductions 3 years ago 3
no offense but that is not good def for your base to be honest.then can just spawn a wall hold it infront of lasers then freeze it then walk in...
bunn211 3 years ago
if you spawned a wall and he had put bombs up youde still die only way it would fail is if you used turrets
tyman518123 3 years ago
LOL good point :D, or just noclip inside..
Lewissnicholls 3 years ago
where do you get wire mod?
kiara1000000 3 years ago
wiremod(DOT)org :p
unnoon 2 years ago
im gonna do that with an apc alarm
zip1996 3 years ago
Works great :D... but I have a problem with wire button tool, I see no toogle on/off or any button skin :(... I see just Defalut :| and the button is a clock without toogle on/off... can someone help me with this pls.?
JohnnyDaHomie 3 years ago
Or even better, you get a prop and put it at 45 degrees outside and *leap* over the fence
chimpyacee 3 years ago
omg hte music is unbarable
fafafa123fafafa 3 years ago
what map shuld i put wires in?
darklinkGanon 3 years ago
SPEAK UP YO !!
Gangfightsrule 3 years ago
I could see a guy running towards the base with a load of zombies behind him screaming "ARM THE GATE! ARM THE GATE!"
WaterCow12 3 years ago
dude how do u do this on a pc
jpsredrum8 3 years ago
By buying Garry's Mod :)
ryudo2052 3 years ago 3
You can also do this with turrets.
raccoon121 3 years ago
dude, there is still a way to get in. you can just stick a plate in one of the path of one of the rangers and freeze it. that way, the bomb won't reset, thus not blowing up again. watch orb's 18 tutorial to fix this.
RemindMe285 3 years ago
18th tutorial?? is it wire too? i have seen only 3 tutorials by "orb"
badgerman500 3 years ago
okay could I make the lasers cut them up instead =)
illusion1942 3 years ago
for some reason when i look at wire objects it doesnt shoe me stuff like what plus what equals what. how do i get the tan "speech bubble" looking thing that tells me what the output is going to be?
cato0y0 3 years ago
how u make your wire ivisable plz tell me
samandianarethebest 3 years ago
set the width to 0 i think
davionic2 3 years ago
yup you cant select 0 but you need to type it i tried it and it work
danebat 3 years ago
Just set the width to 0
XxHAMMERMANxX 3 years ago
there is another way but u need laser stool and keypad stool u wire a button on inside and keypad on outside to an add (make sure the keypad is set to valid is -1) then wire the lasers to the add
Tron11723 3 years ago
yo dude u have phx if so how u get it to work i can't my one to work
samandianarethebest 3 years ago
Finally I can do something useful with Wire, thank you very much for the tut. You weren't 100% clear on everything but by listening carefully and watching you're screen I was able to figure it all out. Thanks again!
Gandi800 3 years ago
watching this for now.. u messed up. u were not suposed to wire the ranger X to the add chip. U wire the Add chip to the rangers. like ADD a to the first ranger. ADD B to second. ect......
extreamtuber56 3 years ago
mine dosnt work :( and it dosnt permanently arm? i wired all x's of the rangers to the add A,the A greater than to the add A and the multiply B to the greater than,and the button to the the multiply and the indicater to the button what did i do wrong???????????????
watchingthis4now 3 years ago
you need to chek toggle
maxcantin 3 years ago
what map is this???
sirlespatterson76 3 years ago
I just turned speakers up full ball. Lol. Thanks for tut dude, Will try it later. Cheers.
codestrikenet 3 years ago
i have see this movie so much so i can hear him in my head..
OlloX3 3 years ago
I built the security system,and it works great! But I was wondering if you could make another tutorial on how to make a way to arm/disarm it from the outside using something like a password activated keypad. Just to kind of build off from this tutorial.
cyclonecalamity 3 years ago
Nice work! god tut
humblesnurp 3 years ago
club pengiun nerd? the music..
OlloX3 3 years ago
Music is by Guitar Trio- Paco de Lucia-John McLaughlin-Al Di Meola? ClubPenguin?
Starbuckscp 3 years ago
Comment removed
OlloX3 3 years ago
alright thanks gmodrules972
diltay9 3 years ago
well i have gmod 10 but how do you get the wire and ranger?
diltay9 3 years ago
search wire tool in garrysmod . org
gmodrules972 3 years ago
download wire mod
Eigeroo 3 years ago
ummm-ummm-ummm. bla bla bla, diddnt lern any fucking thing by this "turtorial"
backo8 3 years ago
what garrys mod is that? also where did you get it?
diltay9 3 years ago
gmod 10, u get it from steam for 10 dollars, if u own a source game, for example counter strike source, half life 2, team fortress source, day of defeat source
johnmighty5 3 years ago
i have a question.....
please answer it.... the explosive is waht name like u knoe the name fer it.
Rainnnnnnnnnnnn 3 years ago
how did u makew ur ragdoll move?
tsunadelover95 3 years ago
it wasnt a ragdoll, just a metrocop npc that runs towrds u when it doesnt have a gun on him.
uiopuiop47 3 years ago
good vid. learned a few tricks. i just guessed the range, but I never though of using the ranger to find them! but the only problem was the sound. other than that, good job
Tfarnham849 4 years ago
nice movie make more i need to learn more^^
eirjap 4 years ago
ha i can make a better less complex one useing
a greater chip d-latch ram keypad and 1 ranger
fathead894