Added: 5 years ago
From: treridings
Views: 67,435
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (231)

Sign In or Sign Up now to post a comment!
  • where did u buy the tires at? i need some for my rc18t cuz those stock ones suck ass!

  • Yes

    

  • @TurboExpBlog : When you post a video of it, let us know.

  • @treridings k lol

  • @treridings i can check out my vid with a stock 7 cell battery. Its called "Tire Ballooning with STOCK Traxxas Rustler gone wrong"

  • could this happen to a real car?

  • @seagizm Top fuel dragsters do this a little bit but not that bad i dont think any street car would really do it though

  • why do the tires balloon? how?

  • @SeeProfileForDetails The tire rubber expands

  • yes you can beat this^^

    watch?v=A45eKGF1iFs&t=3m30s

  • i can, but on a smaller scale look at my channel

  • lol thats nothing, i have a XXX-CR with a 3.5T Novak Brushless Motor which makes the tires shred when accelerationg, it can do a backflip ON THE SPOT.

    My dad picked it up with both hands and turned it on and the receiver would not link to the Spektrum DX3.5 controller so it accelerated to 100% and shredded the skin from my dads wrists.

  • i wouldnt mind a race between this and my nitro rustler. that would be a good one.

  • yes i can

  • @JPfireworks123 : Ok...show us a video of all 4 of your wheels ballooning more.

  • Holy shit that fucker is damn fasssstt

  • nice scoob in the background. what year?

  • @EM217 : Thanks man....2000.

  • nice scooby in the background !

  • @burtonEST : Thanks man!

  • @treridings stock, forced or ?

  • oh my, thats pretty fast, whats it doing at least 90mph i'd say from the video.

  • @astaschak : haha thanks man...not exactly 90...this car with this 10 cell nimh battery topped out at 54.

  • I wish my odl brushed rusteler was somewhere near as fast as this, makes me miss the 15x4 turn I had. In the begining I see a 2.5 rs impreza, it looks well taken care of.

  • at 2:06 the RC car crash! lol

  • my rustler do it much more with lipo but that is a bigger car so

  • that is funny

    

  • i beat that tire ballooning go to the 3rd one down

  • @jeff245able : That's cool...close but not quite...balloon tests are done showing all wheels spinning not holding one wheel and showing only one wheel spinning. :)

  • It seems like its impossible to control a car thats that small with that much power...

  • I have an 18 t with a mamba 8000 and a 1500 mah lipo check my video on my balloon.

  • amazing

    

  • looks awesome and fun none the less I cant get my Slash VXL up to top speed either it gets all squirelly and just crashes but its fun as always. Keep up the good work bash on

  • @rmatli : thanks man!...yeah the Slash rocks but the VXL is crazy powerful and hard to control on 3s.

  • boobs!

  • my rims cracked from it ballooning so much

  • In response to the title of this video...

    Why the fuck would I wanna? I properly glue my tires and have decent inserts.

  • @timbulb wtf does tire glue change? Tires balloon no matter how you glue them.

  • yes i can

  • this is nothing =D

  • thats cute try 9000kv

  • @zachnunes123456789 : words are cute...try making a video.

  • @treridings ooooh burn!

  • i can beat that by a lot

  • @MTown701 : Ok...so where is your video showing it?

  • @treridings ill make one its not much bigger just a tiny bit

  • would love to see it go up against e revo brushless 1/16 scale

  • @Trinibadman96 : I have both but they handle differently....I like the Mini-E-Revo better since it's built to be that fast...it's much more stable. The RC18 is hard to keep straight at those speeds.

    I would bet that this one (8000kv/3s lipo) would be faster IF you could keep it under control and utilize all the power...but since it's unstable the Mini E Revo would beat it since I can get to top speed faster. ;)

  • HOLY CRAP!!

  • WOW that thing is fast!!

  • Ok I will , the only problem is that I fried my motor yesterday because it was around 100 degrees where i was driving it and I won't be able to get a new one until after spring break because I'm working right now and I won't get paid until after this weekend, but I will prove you wrong, and I will have a video up by the 5th of April at the latest!!

  • I can easily beat that with my 5700kv mamba max rustler on 8 cell nimh!! The tires will balloon about 10 inches in diameter!!

  • @kylerustler58 : Let's see!....show a video.

    This is 8000kv x 12v = 96,000 rpm

    Yours is 5700kv x 9.6v = 54,720 rpm

    How can your car balloon more than this with around HALF the RPMs...?

  • @phototend the theoretical max rpm's only count in theory not to mention you have to take account of tires, gearing, and multiple other variables into account. He could have some moabs with no foam and the softest rubber on that system that would definately wind up with a huge diameter balloning effect.

    quit running your mouth off when you don't know crude on the agrument at hand

  • @CrazySnake5000 : OMG you're an idiot...judging by your 'massively popular' videos, you know nothing about RC. No foam???...moabs with soft rubber???

    Are you too young to know the phrase "grasping at straws"...?

    If you can show faster and/or more ballooning (like this video's title asks) then by ALL MEANS be a man and post a video response.

  • @phototend ok lets say this the softest compound and you have two bottom lines dumbshit and also I would post a vid but hum theres something wrong ohh yeah I tape my tires eliminating the balloning I'm so sorry that I don't purposely wreck my tires for the sake of pleasing a dipshit such as yourself

  • @phototend ohh and judging by your vids you suck dick and know nothing of rc I'm sorry you can't judge by that dipshit at least I know more then you even if that counts so little as to be barely worth mentioning

  • i can beat it with my s-maxx lol

  • close but probably not. Were did u get the batery.

  • Puffer fish

  • how fast is it that is fast

  • is that a 99 wrx i see??:)

  • ...haha 2000 ;)

  • OMG!!!! that thing flies!!

  • how did you get the wing on it

  • I made a small custom bracket out of aluminum that attached to the rear shock tower.

  • is that at full throttle?

  • Starting at 1min 17secs it's full passes...it takes a smooth throttle to get it to full without the front end coming up.

  • check out savage x on two wheels

  • @treridings, what wheelie bar is that? ive been looking for one

  • @rustler001 : Can't remember the brand, but it was for the Losi Mini-T...2 minutes with a drill and it fit perfectly.

  • 10cells = 37v...NOT 12v

  • 10 nimh cells x 1.2V = 12V...it's very simple math my friend.

    Read the description...nimh cells...not lipo cells...there's not a RC18 that will fit 10 lipo cells.

  • its 1.2v per cell, its 12v, this sint lipo and if it was, 12s lipo would be 36v not 37v

  • @rustler001 , E NEVER SED IT WAS LIPO

  • thanks you captain obvious,

    i was talking to korujarat...

  • DANG!!!

  • how did you fit a 10 cell in it? plz respond

  • how much? is it?

  • hydrolics

  • Where's your video?

  • Well i dont have 1 but if i tried maken one id probully be on the floor with a bone stickin out of me

  • @nitto888 : Ok...then let's see!....show a video or i didn't happen.

  • Holy shit that thing is fast. And someone finally did a ballooning tire vid with the tires actually glued to the rim.

  • What's the top speed that's faster than my jato and my rustler

  • really that doesn't look any faster then my cousine's jato at all or even his erbe

  • ...ok...and your point?

  • Exactly what I said

  • ur a fuckin idiot, rc18s are like a 1/3rd the size ov a jato or erbe

  • Dude you're the fucking idiot here he was comparing the two cars so I continued to compare the same cars he choose so fuck off

  • Not many of us have gotten our erbes to 64....mine doesn't balloon as much as this.

    The vid of 'onboard at 74mph' shows a bit more ballooning with the VXL.

  • Where are the videos of his ballooning?

  • @phototend up your ass

    we weren't even talking about balloning tires ya idiot

  • @CrazySnake5000 : Hey douchebag...get a clue dumbass...this whole video is about speed and ballooning. Bottom line is that you don't have shit for videos.

    The bottom line: Unless you can beat this video, shut your pie hole...the more trash talk the more you look like a fool.

    The bottom line is this....instead of running your mouth, have some BALLS and post a video response like a real man.

  • @phototend hey not my fault you can't see thru your own ass and see that you are in the wrong conv. so how bout you go and get a clue

  • @CrazySnake5000 : ...so you're saying NO...you DON'T have a video to back it up.

    ...thought so.

    ...if I bragged about how much I knew about RC...I sure would have proof to back it up.

    (ya know....if you looked at the youtube channels close enough, you would have seen the common denominator from the begining)

    Let's see how long it will take you....or maybe you'll just call me a name and not 'get it'...

  • @phototend how bout this I'll upload a vid of why you don't and btw I just used an old pair of tires to demo it

  • wow that is fast

  • holy shit thats massive

  • lol i bet u got no foams,

  • I use foams on the track...not on the street.

  • nyyyce

  • 2:07Lol

  • Nice. You should see my Jato 3.3's talon tires.. Not kidding the diameter increases to about 8-10 inches.

  • haha ugly ^^

  • sweet rc18t but i like the subaru even more

  • haha thanks man...I love my Subies!

  • Lol, I looove this vid, like 4th time I have watched it now. I saw this vid back before I even had a rustler, before I even knew who you were, lol.

  • just wondering what your gearing is like as mine gets hot on just 13T pinion and 59T spur on 7.4V 25C lipo. thanks heaps

  • Treridings, your 18T astounds me. How are your temps on everything? I have an 18R hoping for a 18T FT kit this Christmas :) I have a Tazer ESC and 2S lipo from Flightpower and the 6800KV motor, just because I don't want overheating. How easy do you pop wheelies? I'd like to pull some once I get my 18T, the thing is that yours has top end and mine has more accelleration (probably, the 12V probably evens it out!! Did you burn out the stock pin tires? I have dirt hawgs too. Merry Xmas!

  • thats sick dude, i have had mine for a week and a half and yesterday it got ran over by a truck, still salvageable though, i saved most of it. this thing is tough, i only lost the shocktowers, stock wheels, a turn buckle, drive shaft(main and one rear), rear hub carriers, and one shock

  • I love how the speed stretches the rubber. :D

  • can i ask how you fit 10cells

  • I moved the receiver to where the stock esc is...then put the Mamba esc in front of the antenna...then made a custom pack...6 cells in the normal place...then 4 cells that I velcro'd right in front of the rear shock tower in the receiver's stock location.

  • 1)This is my favorite RC18T vid

    2)Nice Suby 2.5 RS in the garage

    3)Is your Mamba system blowing out your diffs?

  • 1)Thanks man!

    2)Thank again!

    3)If I'm not careful with the throttle I'll melt them.

  • RC18's are fucking awesome. Check out my vid!

  • where did you get that truck and how much did it cost without the mamba system

  • Picked it up at a local hobby shop...its the Team Associated RC18T and it's about $160-$180

  • my favorite part is when you run into the camera. nice work.

  • haha thanks...there's another one on here, above in the video responses, of a 18R Niteline, where I hit the camera head-on at the end and launch it 20 feet into my lawn. hehe

  • Have you tried the Mt tires and rims?

    It should increase top speed if they are bigger.

  • how fast is that thing going

  • The top end is 64 mph starting at 1 min 17 seconds...

  • nitro trucks can blow my fuckin dick.

    like for real that shit is garbage i wasted money on mine im gonna trade it for a brushless 18t.

    i had one before but sold it like a retard for 200 bucks

  • haha right on...go get another one....you'll love it...! Or if you're really into top speed, do a 18R...much easier to control at speed, but you can't go off road as much as a 18T...

  • nice

  • Nice 2.5RS man! And killer RC18!

  • plz tell me that was nitro and how fast did u go?

  • no! it elec!

  • Not nitro...it's brushless electric...faster than nitro.

  • bet it isnt as much fun as a nitro tho that thing would get pwned on an offroad track.

  • Where have you been??...brushless>nitro on tracks everywhere.

  • i would rather take my nitro truck any day rather then a fuckin electric truck.

  • Please do...less competition at the track.

    Tell you what, take a look at the video response to this video...Traxxas STOCK 70mph 1/10th that runs OVER an hour on one charge. Show me that in nitro.

  • that little tike would probably flip over if it hit a rock at the track lol, yeah ill check it out. i live on a farm and i use my nitro on my motocross track so i need the power of the nitro i just prefer the nitro trucks, i have a hpi savage x 4.6 myself and it is a blast!

  • the video is pretty nice, you should send me some videos of you on a track tho with some jumps i want to upload some vids of mine.

  • Yeah I gotta try the cam mount on a track with some HUGE jumps with the 1/10th...haha

  • yeah i was goin to find a 1/10th nitro cause i couldnt afford my savage but i found a guy who just closed his buisness and had all his shit at home got 4 gallons of fuel the savage x 4.6 glow plug igniter etc. everything i needed for like 600 which is an amazing deal. so i got the 1/8th. i seen in ur other videos the camera mount, i am scared with my savage flying around in the air still never mind my camera attached to it lol, id love to see those vids tho keep me posted. thx.

  • I want a slow motion at like 46 seconds!

  • Nice vid!! How fast do it goes with 2S Lipo?

  • sweet jesus :O

  • Shit how often do you build your diffs? whats the secret to building a great diff?

  • On this car I have the MIP super diff in back and stock diff in front. Shim them nice and your good. Also if you are running a Mamba brushless, program some punch control into it. That will save your diffs as well!

  • Does The Tekin Mini Rage system have punch control settings? I am about to buy that system on friday. Heard anything about that system? Im getting the 8100KV and ESC for $140. I am also goiing lipo on friday.. YAY. I KNOW my diffs will slip tho thats teh thing... How much do you back off off the diff screw after rebuilding? Shim how much? I shimmed just to feel the teeth having some drag. Correct?

    Also, is it good to take some sandpaper to the d washers to ruff them up? MY CAR IS GUNA B NUTZ!!!

  • Killer paint job.

  • nice man! i have an rc18t that i turned into a tek18t and its probably not as fast as yours but id suggest buying that chassis cuz it will help make such a fast car handle better...its alot lighter to(carbon fiber)

  • Ohh yeah...the tek is a GREAT chassis!

  • Omg that thing is so fast you can it advances like 10 feet every frame the camera takes. CRAP!

  • hehe yeah...I filmed it at 30 frames per second...;)

  • Is your 18r niteline faster than your 18t?

  • yeah...mainly because of gearing...but not by much. The Niteline body is WAY more aerodynamic...ditch the wing though...

  • Thanks

  • gearing 2 sorry

  • what diff and lipo r u using

  • This car I was running 10 NIMH cells...but in the Niteline vid I'm using a 2100 mah 3s lipo...11.1v...and 18/55 gearing.

  • Thanks

  • hey buddy, im having some trouble with my 18t. everytime i go to accelerate it goes flat out and out of control. it wont respond to any radio movements from my radio. all batteries are new and my arial is quite long. any ideas? cheers

  • You need an RF choke core on your ESC control wires (get them at RS, guys might be clueless to what it is but they have them) because high-speed brushless signals make mega noise. Had the same prob on mine till I put the choke back on.

  • I STILL can't get over this video! My boyfriend and I were leaning over each other's shoulders cracking up at how dam CUTE that was!!! and then when he chased that silver van and PASSED IT RIGHT UP...ZZZZZOOOOOOOOOOOOOOOOOOOO­OOOOOOOOOOOOOMMMMMMMMMM WHHHERRRRRRRRRRRRRRRRRRRRRRRRR­! no problem. your video is the greatest. I'm saving it to my favorites! ..and sending it to all my friends. Kathy in Oregon

  • The very beginning when he took off CRACKED ME UP! AND THEN HE'S SUDDENLY IN THE BACKGROUND DOING LITTLE WHEELIES!! HA HA HA HA HA EEEEYYYAAAAAAAAAAAAAAAAAAAAAA!­!!! HA HA HA AH AHA this is my favorite video!

  • Does it have any cogging issues?

  • When I was running normal NIMH cells I got alittle cogging, not much. When I went to LIPO there's none at all.

  • i blew out a tire holding my car and giving it gas...

  • hey dude, i just got a new mamba 8000kv combo but cant get reverse to work. it seems to acknowledge the forward, reverse and neutral commands when callibrating but when i go to drive it the red light on the esc comes on but no reverse movement. any ideas? thanks.

  • hmm...probably in race mode...there's a mode that doesn't have reverse, for race purposes. Check that...it's in the Mamba directions for programming.

  • thanks. is there any way to reset the mamba system to factory standard? i don't have a castle link either. thanks again

  • how fast is the stock rc18t ???????

    and how fast after the lipo

    how fast after the lipo and brushless :D

    and how long stock and lipo bat. goes_???i m tryin to buy micro-t or rc18t but i dont know which 1 is better :)))))))))

  • Here are some estimates:

    Stock RC18T : 20mph

    Add Mamba 8000 brushless (stock batt) : 35 mph

    Add 3s lipo (11.1v) : 50-70 mph

  • As far as battery run time estimates:

    Stock RC18T : 10-15 min

    Add Mamba 8000 brushless (stock batt) : 15-20 min

    Add 3s lipo (11.1v) : 30-60 min.

    (depends on size and driving style)

  • so nice!! see my vids!!!

  • mamba are a blast on 1/18th scale, i just got my castle link to check out the computer program. cant wait to mess with the power curves

  • Yeah!...programming the power curves, braking, and punch control is very cool!

  • dude i yanked my mamba out my junk mini quake, now looking at sticking it in an hpi micro drift rs4, new on ebay for 85 bucks. drifting is gay, but ripping the tires off will be fun, haha