you are a smart man :) first video ive seen of anybody starting a drag bike and then putting the fail save on there wrist :D atleast now if it gets away it will shut down and crash fairly quickly.
ay man nice mustang in the back ground is it a true saleen ? and do you have and saleen bumpers youd wana get rid of ? also do you know dean comunal ? my dad use to be his main crew cheif for the ahdra team
man, its a bad scene for me. I got married there nearly twenty years ago. I'm really happy with my current wife whom I've been with now about eleven years.We've got young children. maybe T&O this year.
the rear engine ha the usual double roller sprocket for the primary drive to the slipper, and stacked on the end is a custom 530 sprocket which the back side is faced off, using the primary's thickness to make it line up with the front sprocket, which has the thickness of a solid replacement for a compensator but only a single 530 sprocket where the outer row of teeth,then outside the outer rr motor link gear an outboard bearing support. hard to give good detail limited no. of characters
This fueler would be perfect for the nostalgia drags. Elmer Trett would be proud! Just need to get that dual-engined Norton "Hogslayer" back from England!
For those not in the know, Nitro is an inhalation hazard. It's kinda caustic on the nasal pasages and lungs. Thats why fuel pilots usually wear resperators. This thing consumes a gallon at idle in about 45 seconds.
Your old lady yellin' at you and everyone knows you sure as hell ain't pain atention. Cool bike, lets see you get to the strip with it. Sorry you own a 5.0 though, why don't you step up to an LS1, LS2, LS6, or LS7 powered vehical, then youd be able to dust your own drag bike.
They are just too small, specially in the mirror of that 180 mph Saleen. Got a mill outta one in the garage, think I'll use it on a pitbike. But, I was payin attention to the destructive device between my legs.
Man that is WAY COOL. Still old school!!! I ran a few times with some Brothers in Coos Bay Oregon where I came from. Need help with fuel I got your'e BACK
@nicklking A little aside...lots of guys just ran on the power of the juice.
Don Garlits is reputed to have run engines very close to stock for his match race and exhibition runs and went very very fast just cleaning up old 392 truck engines, popping em into the digger , adding juice and going zoom.
Cheap ploy. Anyway...the return curve on engine mods for performance when running nitro is very steep. Better putting it into reliability parts.
No it means you looked totally unsure of yourself on that beast.. obviously your not a rookie,, just a redneck unprepared before you set off to break your neck.
Well, I've got more than a hundred passes on it, I know what its capable of, and I'm the only one who can see where the end of the driveway is. A word to the wise,Top Fuel ain't made to be played with unless there's a long stretch in front of you. Wise man try's to run out of fuel at the other end. Ask Gordon Minio, or Eddie Hill.
well gang, as soon as I can find Nitromethane to purchase in a quantity less than fifty-five gallons, I'll post more video from the track. We'll see who is gonna step up and provide for the speed freaks.
This guy was my best friend when we were growing up in Texas. I helped him on the line at an all Harley drag in Colorado with this bike about 10 years ago. Man was that that starter heavy. You guys don't get a good appreciation of the size of this bike cause the rider is 6'8"..
that is the most beautiful display of shovelhead engines ive ever seen.
usmcpitboy 1 month ago
you are a smart man :) first video ive seen of anybody starting a drag bike and then putting the fail save on there wrist :D atleast now if it gets away it will shut down and crash fairly quickly.
tylerwalker2 5 months ago
your tall as hell!!
brycenrodrigo 8 months ago
Hey what do you use for the starter? What drive do you use? Where is the motor from?
Thanks
shaunk132 1 year ago
ay man nice mustang in the back ground is it a true saleen ? and do you have and saleen bumpers youd wana get rid of ? also do you know dean comunal ? my dad use to be his main crew cheif for the ahdra team
440exxxrider 2 years ago
man, its a bad scene for me. I got married there nearly twenty years ago. I'm really happy with my current wife whom I've been with now about eleven years.We've got young children. maybe T&O this year.
BROWSMAN88 3 years ago
just come to the track and stay away from the fungus down town... that scenes ok.. get anymore fuel?
kelly1052 3 years ago
Hey man you gotta take this to Sturgis for the Nostalgia Drags... check out the nitro ironhead I posted. Kelly1052
kelly1052 3 years ago
how did u link both engines through one final
drive can u ples get back 2 me soon
shits123 4 years ago
the rear engine ha the usual double roller sprocket for the primary drive to the slipper, and stacked on the end is a custom 530 sprocket which the back side is faced off, using the primary's thickness to make it line up with the front sprocket, which has the thickness of a solid replacement for a compensator but only a single 530 sprocket where the outer row of teeth,then outside the outer rr motor link gear an outboard bearing support. hard to give good detail limited no. of characters
BROWSMAN88 3 years ago
This fueler would be perfect for the nostalgia drags. Elmer Trett would be proud! Just need to get that dual-engined Norton "Hogslayer" back from England!
irondragsportster 4 years ago
i bet the neighbours fucking love him
r1wantone 4 years ago 4
For those not in the know, Nitro is an inhalation hazard. It's kinda caustic on the nasal pasages and lungs. Thats why fuel pilots usually wear resperators. This thing consumes a gallon at idle in about 45 seconds.
BROWSMAN88 4 years ago
Your old lady yellin' at you and everyone knows you sure as hell ain't pain atention. Cool bike, lets see you get to the strip with it. Sorry you own a 5.0 though, why don't you step up to an LS1, LS2, LS6, or LS7 powered vehical, then youd be able to dust your own drag bike.
ZacFMF 4 years ago
They are just too small, specially in the mirror of that 180 mph Saleen. Got a mill outta one in the garage, think I'll use it on a pitbike. But, I was payin attention to the destructive device between my legs.
BROWSMAN88 4 years ago
Man that is WAY COOL. Still old school!!! I ran a few times with some Brothers in Coos Bay Oregon where I came from. Need help with fuel I got your'e BACK
irishmike07 4 years ago
Preciate it man. Us irish mikes gotta stick together.
BROWSMAN88 4 years ago
sounds stockish
nicklking 4 years ago
nothing stock but the throttle cable. ask joe
BROWSMAN88 4 years ago
im just jokin with ya. I bet that thing would tear a GIXXER a new ass! I like the coughing at the end too. lol V TWIN!!! everything else is gay.
nicklking 4 years ago
@nicklking A little aside...lots of guys just ran on the power of the juice.
Don Garlits is reputed to have run engines very close to stock for his match race and exhibition runs and went very very fast just cleaning up old 392 truck engines, popping em into the digger , adding juice and going zoom.
Cheap ploy. Anyway...the return curve on engine mods for performance when running nitro is very steep. Better putting it into reliability parts.
Tom Loughlin Jr.
telsport 1 year ago
n00b
surfstylez 4 years ago
I know that doesn't mean like rookie, does it punk. You need to know who you're calling what, or you might remove all doubt!
BROWSMAN88 4 years ago
No it means you looked totally unsure of yourself on that beast.. obviously your not a rookie,, just a redneck unprepared before you set off to break your neck.
surfstylez 4 years ago
Well, I've got more than a hundred passes on it, I know what its capable of, and I'm the only one who can see where the end of the driveway is. A word to the wise,Top Fuel ain't made to be played with unless there's a long stretch in front of you. Wise man try's to run out of fuel at the other end. Ask Gordon Minio, or Eddie Hill.
BROWSMAN88 4 years ago
well gang, as soon as I can find Nitromethane to purchase in a quantity less than fifty-five gallons, I'll post more video from the track. We'll see who is gonna step up and provide for the speed freaks.
BROWSMAN88 4 years ago
This guy was my best friend when we were growing up in Texas. I helped him on the line at an all Harley drag in Colorado with this bike about 10 years ago. Man was that that starter heavy. You guys don't get a good appreciation of the size of this bike cause the rider is 6'8"..
ScubaGod3975 4 years ago
Holy jeebus! That's badass!
ColonelK0rn 4 years ago
Marion owens, Carl Ahfeldt, Bonnie Truett....Great days, Great people, Great double hogs.
riclineri 4 years ago
Awesome!! Are you going to race this somehow??
bikermoore 4 years ago
soon. very soon.
BROWSMAN88 4 years ago