Added: 3 years ago
From: kevaughanshiu
Views: 33,964
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (339)

Sign In or Sign Up now to post a comment!
  • w4et5ttttttttttttttttttttttttt­t

  • eu posso escrever isso niguem vai saber ha 100 anos

  • kkkkcdsfgkjtrh

  • muuuuuuuuuuuuuuuuuuuuuuuuuuuuu­uuuu 

  • haha hilarious, you sir have gained a subscriber

  • Капец, вот что значит "руки из жопы".Даже коробку открыть не может.

  • is it in

  • great vid - made me piss myself laughing, especially the CPU install bit...classic

  • .... no words on how you did all this... i am actually crying now.

  • I watch this video from time to time and still get a good laugh. Cuz I would react the same way. lmao

  • @MarouaneOfficial2011 the heatsink usually has the thermal paste on it already, when its new. dunno then

  • You fail,

    

  • @Georgefromaccounting Nope, the CPU cooler does it's job since i dont overclock. Never had an issues with it, no overheats, nothing. My graphics card on the other hand is the one that's suffering since I was dumb enough to buy the very first generation of the 4850 when it first came out. Single slot card... they dont make them like mine anymore since it always overheats :(

  • Why don't Intel change these stoop-id heat sinks they send with they're cpu's..Surely it wouldn't cost much for them to send a half decent one or even develop a new and better stock H.S.!!!!.

  • @williamblair11 I really hate them. From now on i'm buying aftermarket coolers that are screw in's cause I think that'd be alot easier and more secure than these push in pins

  • jajajajjajaja...good video

  • lolz im gonna comment rate sub and favorite all of these build videos :D made me laugh so hard at the cpu install

  • intel have been using that same stupid fan for ages...

  • Best video ever! xD i was laughing my ass off when you were installing the cpu :D

  • @Georgefromaccounting LOL nice

    and I took it down cause it was a shitty video anyways lmao

  • @Georgefromaccounting I agree one more year and that's it for this baby but i'll be entering University at the same time :( so I probably won't be able to build a new computer. I'll have to go into the laptop market :S

    unless i can convince my parents that i need a beafy computer since I'm trying to get into film studies XD editing video takes alot ;) wink wink nudge nudge

  • @Georgefromaccounting

    Not really I'm fine XD my case is the same size as my friend's Antec 900 and he has two 5850's and an i7 920 in with 4 HDD and one Solid state HDD. He's just bout packed in there so I should be fine :P

    I can always make my own case so if I needed to :P

  • Hey what motherboard and powersource are u using

  • @Georgefromaccounting kevaughan

  • @Georgefromaccounting I'd make a new video of course :P

    Probably an i7 build if I ever save up enough for it T_T if not, AMD X6 does just fine.

    Thinking bout getting 2x 1TB HDD and having them in a RAID too boost speeds :P

    And definately 5850/5870 :P

  • @Georgefromaccounting OMG I KNOW

    I'm due for an upgrade/rebuild next year T_T

  • dude i got the same ram two years ago when i built this comp i'm using! and last year i got the P5Q SE! pretty jokes vid too...

  • Where did u get the bleep noise??

  • @TheBoeing144 Ripped it off another video that had it ;)

  • LOL 539 fps

  • that pc is a melted shit, the fuckin guy doesnt know how to install a cpu

    how old is he? 18 years old , i am almost 15 years old and i know how to install a cpu, i installed da cpu in less than 3 min, take that, freak guy...........................­.............

  • @TheAlvaomarulises i install a full gaming rig under 30mins and i'm 14 :P

  • how much research did you have to do to get all the right parts ?

  • @CAMERONOMG

    About a month of just looking around every website and getting a general grasp of what parts to get in terms of best bang for the buck. This was the best config I could come up with AT THE TIME. Of course now it's really outdated, you can get like 4x the computing power with the same money i spent XD

  • no thermal paste...

  • how many hours you needed to build 12?

  • @gzimkelmendi0 about 1 or 2, depending on if you bother with cable management and how experienced you are, you can do a simple amd system in 30 minutes probably

  • Ur like me i dont take care at all... I bent the pins on my processor and need a new one :D

  • can't stop laughing !!!!!!!!!!!!!!!!!!

  • @pilot7am You should see me build other things. My god.

  • @kevaughanshiu lol man ur tooooo funny, btw i will add you as a friend !!!!!!!!

  • i fucking lolled when you dropped the CPU in ^^ "shBIIP"

  • liked he never do this before amatuersssss!!!

  • sexy memory radiators... its cool)

  • so funny =]]]

  • LOL!!!

  • what was the magazine you got for free?

  • EPIC FAIL the sticker

  • lolol! the sticker omg lol!!! chillax dude lol!

  • 3 weeks to mount a pc?

  • funny guy man

  • This is so funny it takes you forever to install that cpu

    5*

  • You're funckin' scared to put your cpu on that bord....chicken!

  • the last 5 sec on the vid it shows crysis with 539 explain what that means? plz

  • thats Fraps showing the framerate... and its that high cuz its with the intro screens

  • WTF ROFL..

  • omfg lol

  • Your Funny :D

  • LOL I'm the same way when I switched my CPU, I was so afraid to press down on the clip, I was afraid I'd break those tiny pins under the cpu. :P

  • you make me laugh dude!!! haha nice vid^^

  • funny stuff

  • First 10 seconds = WIN!

  • Zomg, you are soo careful with your motherboard and stuff, i think I might have destroyed mine with static. Jeez...

    And I cost over 1k USD total... ): AHH!!

  • I treat it like my first born child

    with care and love :3

  • stock c2d heatsink is loud

    esp when your playing mw2 you can hear your fan through your headphones o.0

  • that 4850 looks so sick

  • i can not stand those heat sinks i always bend the little plastic clamps.

  • would 4850 crossfire bottleneck e8400?

  • uhh no...

  • Not even close. And if you OC the 8400 to 3.6 ghz, for it to be your bottleneck you'll have to get into the high end 5xxx ati cards. Even then...

    Truth be told the E8400 is probably the best overall CPU for gaming on the market, besides moderate/high end core i7's. For it's price, it's unbeatable.

  • i totally agree, the e8400 at stock may be a bottleneck in 1024x768 but anything above that is good, the E8*00 series is a perfect gaming cpu.

  • this video made my day, thanks :)

  • lol 539 fps you probably have everything on really low and plus it was on a black screen LOL

  • HAHAHA! That was funny XD

  • Lolwat 539 fps?

  • im getting the same motherboard and cpu :D do you have got any tips for me ? ;)

  • i got the p5q pro make sure you get an ati card like a 4830 or 4850 depending on your budget ..and this board was designed for quad cores

  • LOOOOOL CPU INSTAL HA HA HA HA HA HA

  • LOL you are entertaining to watch; its very clear you've never done this before:)

  • lol have you seen the animated movie "Up"? when you make your voice all high and funny, it sounds like the dog in it!!!

  • LOL yeh i saw that

  • JUST CLAMP IT DOWN

  • if i was u i would change ur PSU ur system could blow with such a low powersupply!

  • it's been running perfectly fine for over a year.

  • push pins are easy!!!

  • how much was the build all together

  • WTF!!! O_o

    "I dont now its in???" OMFG!!!

  • Holy shit at 0:5 WTF that's not going to look good

  • what RAM, PSU and CASE DO U HAVE?

  • 4gb gold ram lol why?

    PSU = Thermaltake, some old 500wattz

    Case is a Apevia X-plorer

  • Does the heat pipe make any difference at all? They say its reduces heat by 10 degrees. Notice anything like that??

    Thanks.

  • funny how when u open anythong a weird aukward sound comes out

  • what do u mean by heatsinks= fail

  • Stock ones are crap :3

    they just do the job lol

  • LOL! I remember when I watched this last year... I came across it again! I wanted to say that you remind me of the funny noob robot in Transformers when you talk fast XD!

  • dude me too!!! haha

  • rofl!!! man u gota be more gentle and learn how to do it proberly

  • Is it in, i don't know if its in, i don't know if its in

    thats what she said

  • lol your over cautious like discharging and shit by touching metal ive built my computer without discharging and shit or anti static stuff and its fine all this protective shit is bs apart from packaging of course

  • yea mate, plastic creates so much static jks lol and from wat i've seen i don't think you should be building computers because of what happened with the CPU

  • >:O GET OUT XD

  • hahahhahh the last picture was crazy xD i have the same cpu but clocked to 4 ghz with gtx 280 in sli

  • yea just look on meh channel i should an updated vid.

  • T_T tired of answering this over and over again.

    you can see it on the stock CPU.

  • well done on ur first build, this vid is funny :D lol

  • Ha Ha Ha . . Hate them stupid heat sinks.. they do my head in.

    Nice build m8

  • I'm glad u've bothered to watch it multiple times lmao

    if u like this u'd love to see me do other things around the house.

    eh erm. Mow the lawn D:

  • Ha ha ha!! Best build vid ever!!! Damn stickers lol. How did you get the heatsink on!!! I have this motherbord and the same stock heatsink and ib bends the shit out of the bord when i try to put it on. WTF!! Is it supposed to do that??

  • i 'm using same board,same CPU,bought in 2008/08,but Corsair ram

  • will crysis run on a 8800gts graphic card

  • ya dont worry bout it.

  • worry about what ?

  • lag

  • lol love this vid :)

  • I love you :O

    XD Peace!

  • hahahaha lol the curse of the paper XDXDXDDDDD

  • Hey Man on the first video Build Part 1 (unboxing) what magazine were u reading

  • It was some lame Maximum PC guide thing.

    i found PC Gamer's magazine better when it came to there "PC bulding bibles"

  • lool u should have just pushed the CPU pin down man, i got the same motherboard but CPU i got is a Intel Core 2 Quad Q6600. and the heatsink is much bigger then that 1, dual cores have tiny heat sinks, put stock heatsinks rule. mine are really good for stock, and my ASUS 4850HD stock fan is awsome, card dont go above 71'C at max stress. 34'C idle :D. hudge heatsink for a gfx card. and plastic dont create static :D and the CPU is actualy a bitch to install. i hate them clips,.

  • You have your q6600 stock?

  • Yes. no need to overclocker it.. its powerful enuf at stock.

  • how mutch bether is a q8400?

  • u shud excpect a fite bak from clampin the cpu, nuthin 2 wury bout lol

  • yea. at first i thought i was doing it wrong.

  • Haha, I just got those exact same parts today, minus the ram (got a 4G kingston kit instead) to replace my current shitbox.

    Too much of a pussy to build it myself since I'm a paranoid son of a bitch so I'm getting a mate to build it for me tomorrow.

  • :3 yea i understand man.

    fancy parts worth big bucks and u dont want to fuck it over rofl

  • LOL

    I feel better about building my computer now. I basically did the same thing with my CPU yesterday. XD

  • XD yay! im not alone

  • GRRRRR! i shake my fist in ANGER!

  • HAHAHAHAHA taking care of new pc or what

  • 5:30 Sexy

     lol

  • hahaha, WHAT THE FUCK!! lol, priceless, Nice motherboard and nice cpu purchase

  • I didnt have all that shitty stickers.. :)

  • it looks like you were doing it for the first time :P

  • lots of things i've doing were my "first time"

    if u get what i mean XD

  • wow... sir hesitate allot XD

  • I just put together my first build and I had absolutely no trouble installing the cooler. I was a bit worried about it before because i heard it can be a bitch to install them, but i was pleasantly surprised. Finished the build in about 15 minutes, pretty good for my first time i guess.

  • ROFLMFAO

  • lol.

  • lmao @ 2:26 you drop the CPU and go SHIT

  • haha. F**K this sticker

  • yea right 539  lmao

  • Lol you're accent :P

    Also or i got an fucked up heatsink xD

    it was funny as hell.

  • heh lol

    good working :)

  • the cpu is in! comon man jeasus

  • lol 539

  • fuck me. it's not a MINE you know, you can touch it!

  • What problem was he having with the CPU. What was it?

  • He doesn't know how to work the pin... :) Guy who made the vid, you just press it slightly to the side and slide it in, dont push it straight down

  • Ahhhh Gese i had same problem but i just clamped it down and it worked hmm

  • Yeah you are hardly working with glass, these components can take some rough handling. They run at temperatures around 50 celsius in load, we don't :)

  • lol! took you forever to open the cpu box

  • wait till you see me install heat sink onto video card...

    D: goopy glue goop shiz!

  • I'm building my second rig(My prior abit IP35 broke down) with almost just same parts, only gold OCZ ram and HD4870. When pressing tray down, I suggest pressing it down also with your finger. Building computer with very expensive parts is scary as hell.

    Is it better to build in case than on the box? I have no idea which is safer.

    Thanks for the HQ vid.

  • build it outside. cause when pressing stuff like ram sticks into ur mobo while its mounted on "points" may crack more than if the preasure was spread out on a box.

    boxes are your friend.

  • looks as if he's handling dog shit

  • Great! XD sticker....... ^^

  • ABahaha, man your so noob. and nervous lol. Love your smooth CPU installation!.

    Great vid :).

  • eat a dick, he's new. you didn't come out the sack just knowing bitch.

  • haha this is a pretty f!@#in funny video. nice man. i was the same way when i build my first computer

    haha

  • OMFG You didnt use any coolingsperm on the cpu?

  • It comes pre-installed on the heatsink.

  • lol uat the end with the 539 fps or w/e its prob when ur on the menu or on superlow on the menu cuz ur card sux dick...i got msi p7n diamond wiht gtx 260 core 216...and an e840000 which is easy to install unless ur pussy and are afraid of pushing the pin down and it was my first build btw...and i know more what i am doin than u...but u have a good setup..and a good card and a great cpu but i know its ur first build...but next time look at vids on how to install it..becuz it helps alot lol...

  • You a fucking idiot or something, first you insult his card then you say its good :s.

    yo man good video, start with the sticker was hilarious. good job keep it up.

  • children these days on drugs -,-

  • I wont be suprised it static electricity fucked up the cpu.

    You need to be grounded

  • :D lol i hate this too this fu*king papers all over the mainboard

  • rofl ahhahahha noob

  • hehe funny video, meQ°

  • fu@k that sticker!@!

  • The socket is supposed to make noise and be hard to put down. Just make sure you matched up the yellow corner with the correct corner of the socket.

  • tee-hee, noizy sockets :3

  • Man hahaha :D i <3 the moment when u saying to ram ,,mm, sexy" haha :D

  • they aren't shiny no more :(

    I SHAKE MY FIST IN ANGER AT DUST!

  • lol. get a can of compressed air.

  • funny vid man, u kept droping every thing, lol, nice vid though