Bedini Leedskalnin 3xMagnets Better Torque

[SimonD157]

What Jeff Bridges does in his freetime.

[1BustedMyth]

You'l have to excuse me, I'm new to these Bedini units, someone at one of my clubs is into it, soo I'm real green, I'm deeply involved with building electric motors for cars from scratch and Flywheel storage devices, I can see principles from both area's at play here. So I take it this is a really efficiant electric motor design? what are the volts and amps you are putting in when you run it at the end. Thanks, clever use of a hub cap too

[1KillerBitch]

here's a new clue for you. the pyramids and ed's castle are built on a limestone aquifer. follow the ley lines as ed did when he moved the castle north from original location. my question is do the ley lines move over time or are they consistant?

[MrAnguswangus]

@1KillerBitch Ed was on to a lot of things that he kept to himself, for whatever reason. Ley lines?...not sure about that. I think the earth is basically a big crystal...an Icosa-dodecahedron...here's a good vid showing that:

watch?v=dFqcAMeeZ28

Warning: That video might kill you!...haha!

[1KillerBitch]

keep it up ... glad to see someone following Ed's design. i read all the comments between you and jossdeiboss then went to his channel, lmao. any negative comments i get from people i check their channel first then decide if they need some constuctive imput or if they need to be blocked. we still can't make a horse drink or an idiot to think

[MrAnguswangus]

@1KillerBitch Haha! I work with both, horses, and idiots...I agree 100%! Ya I usually check the channel first but when someone calls me fake it gets my dander up...lol. Thanks for watching :) I should have another video soon with a Tesla design...stay tuned!

[gamer60634]

use star ship coils with ferrite cores if you can not find the right size just use a clear epoxy mixed with iron filings and you will have some supper torque i would move to a solid plastic disk made from the plastic decking

[memobook2010]

can this motor run without driver coil just magnets as the driver and coil to charge?

[MrAnguswangus]

@memobook2010 No, unfortunately not, that would be nice though. You cannot have magnetism without electricity, and you cannot have electricity without magnetism. Every magnet on the planet was made through electrical means. I'm working on my next idea right now...making a coil core. Frequency is everything. Always listen to the guys who died pennyless.

[memobook2010]

@MrAnguswangus yes but if replace the driver coils with magnets it wont turn. thats what you are saying right

[MrAnguswangus]

@memobook2010 Yes, if the coil was replaced by magnets the wheel would stop turning.Every time a magnet passes by the coil, the transistor in the circuit "opens" and a magnetic field is produced by the coil due to the electricity allowed to pass through from the battery. The north side of the coil is facing the north faces of the magnets so there is a push which propels the wheel. This is why it turns. A Bedini circuit allows work to be done but recapture some energy at the same time..efficient

[memobook2010]

@MrAnguswangus if you put the magnet 'driver' north facing to the wheel and the magnets on the wheel having them pass south first then north so when the south closes to your magnet 'driver' it will pull and when it is leaving the north on the magnet 'driver' it will push the magnet in the wheel... will that work?

im trying to do something like that just magnet for the driver and coil for charging

[MrAnguswangus]

@memobook2010 Interesting idea, not sure...give it a whirl and see what happens. Good luck, thanks for watching.

[MrAnguswangus]

@mtororuiz Hitler and Goebbels were drooling retards and their psychiatrist attested to that fact after the war. These are your heros?...This is who you follow? Do you drool?...lol.

[CumQuaT1337]

I didn't know the Jeff Bridges built Bedini motors!

[wcemichael]

I like that wheel. what did it come off of?

[britishtuna]

So after you spin that with your hand won't the magnets eventually meet and the thing stop spinning? Or will that keep spinning forever?

[bongcouver]

That shape reminds me of the shape of the disc they found in an Egyptian temple that they believe to be a lotus vase. Other's think it's a part of a machine. Solid metal, one piece and beautifully crafted.

[Keysforge]

This is one Nikolai Tesla invention.

[1986edgaras]

Could you post some spec for me please?

I have some trouble with my bedini motor. When the magnet passes the coil it shows barely 0.01V so it doesn't open a transistor to make a switch. Can you measure yours and pm me the measurements and spec of your coils please?

Kind regards.

P.S.

keep up a good work and don't react to the stupid morons who can't see anything what's a bit further then their nose! :D

[123PSI]

My engineering degree would tell you not to bother, but the optimistic in me thinks people like you will stumble across something interesting one of these days. Free energy... however, not likely.

[MrAnguswangus]

@123PSI Ya, I've actually learned better of a lot of my ideas since then :)

Here are my most recent energy vids...or should I say free energy vids:

watch?v=rs9k-iMjjsE

watch?v=p4vpRbLVyW4

You may also want to search "delayed lenz effect."

Enjoy and thanks for watching!

[jossdeiboss]

I think this another FAKE video. First of all, you know that a magnet, to pass near the fixed magnets has to "fight" against the repulsion and then, if it succedes, it passes on the other side to be pushed. The problem is that the repulsion force are equal in both sides of the magnets, so it's impossible that there's an acceleration. PLUS, the magnets have to make a half round before being rejected and repushed. In the meanwhile, there are friction forces. So, the wheel slows down.

[MrAnguswangus]

@jossdeiboss I'm not even going to explain. Anyone with half a brain knows why my wheel is turning. We'll see if you can figure it out on your own...lol...probably not. Thanks for watching :)

[jossdeiboss]

@MrAnguswangus It turns because there's an electric motor or something hidden of course. With that structure is very simple to say that is impossible that it can turn on his own :D I was just warning people that this video is a fake ;)

[MrAnguswangus]

@jossdeiboss You have got to be kidding me right? I hope so, because if you're too dumb to look up the first word in the title of this video, then there may be no hope for you. That's your first mission: Look up "Bedini Motor." Because that's exactly what I replicated here....a Bedini MOTOR.....you imbicile! You should probably reserve your comments for Sesame Street videos...and do some reading. Thanks for watching :)

[jossdeiboss]

@MrAnguswangus I'm not kidding. You're one of the person who thinks that you can CREATE energy from nothing! So, don't say I'm foolish. It is SO CLEAR in this video that it CAN'T WORK without external motor. Try to make something a little more "difficult"...maybe someone very stupid will believe in you.

[MrAnguswangus]

@jossdeiboss LOOK UP BEDINI MOTOR YOU RETARD!!!! I built a MOTOR you stupid idiot. You cannot make yourself look any more stupid...look it up! I BUILT A MOTOR!!!!!!.....NO TRICKS! RETARD!!!!!!!! ITALIAN MORON!!!!!! What I built IS a motor.

Congratulations.....you are by far the stupidest person on Youtube.....maybe on the planet period.

Now you are blocked becuase I cannot be any more clear and you obviously didn't look up Bedini Motor. Again, you are retarded.

[wcemichael]

@jossdeiboss Say it with me.... "benini MOTOR" You ass anybody can build a bedini motor. Here is a third person (me) who just strolled in from nowhere and is telling you that this is an ELECTRIC MOTOR. The only difference is it is configured differetly that a conventional electric motor but it is still an electric motor. It is running off of electricity not "nothing"

[wcemichael]

@jossdeiboss THE WHEEL IS THE ELECTRIC MOTOR!!!!!!!! SEE THE ELECTICITY BEING USED IN IT?

[wcemichael]

@jossdeiboss Listen shithead. It's a motor. Motors have permanet magnets AND electromagets that TURN ON AND OFF AS THE MAGNETS ARE MOVEING INTO THE CORRECT LOCATION. IT TAKES POWER TO RUN IT!

[kellogs345]

isn't that an invention from tesla??

[gibbo1112]

is that... is that a front wheel off a peewee 50?

[Spirality0]

Nice Bedini, but where is the Leedskalnin stuff?

[SuperAaron969]

do you think if the ball-bearings e.g friction doe;s not help

make it ant-gravity use two magnets like a shock-absorber with no ball-bearings

cool vid

[kingpersley]

The king says" This is terrific and easy to understand, so far". I would like to know more about this and even have some questions on what you could power with these types of devices. Came on looking for Tesla and found this. great!

[usedbandage9]

What do you think are the most important points to making it spin fastest?

[bearpatch626]

use the diagram for the earth in this video for your work..... because if what we are missing is the bigger picture and everything is universal then this might be it.... give it a shot ;) SHADOW GOVERNMENT (SG) Part Thirteen The Hollow Earth Reality ( Part A )

[MrAnguswangus]

@bearpatch626 Haha...good to hear that someone is aware that the earth is hollow....so are the other planets in the solar system. Cheers.

[maxydem1]

Hi. I wonder if you can send to me some plans or how to made it?. I´m from Argentina and i like to do that.... Thank you and sorry about my pour english.

maxydem1@yahoo.com.ar

[fuelban]

Hi Guy, these microwave magnets aint too strong, you need neadinium, probably spelt that wrong LOL but you get the jist, LOL,

Thom in Scotland.

[alienhddna]

can this motor run useing any typ of magnet

[pkrska]

Which part is the Leedskalnin part? Wow, that wheel is spinning. I used neodin magnets and I notice that you are using those other ones. I know it states to use them, but what difference does it make in either energy gain or loss?

See my working version on /watch?v=alrqPKW1v68

[MrAnguswangus]

@karmand21

LMFAO!...I just checked out your channel and it seems that you are just a little kid that likes video games. Also, I see that you like to make uneducated comments on  other videos as well. Too funny...lol...good luck with your video games junior.

[MrAnguswangus]

@karmand21

This is a hobby of mine and that was a long time ago...you should watch one of my more recent vids. Your comment reveals your arrogance and possible agenda...my guess is that you were just stoking your well fed ego. In all reality, you are more likely to have learned nothing in the last year due to your ego baggage.

My expertise is actually human biology/biochemistry. Would you care to show us how stupid you are in that field? Thanks for pointing out the obvious.

[MrJetjoe]

it is more eff to genrate the power you are going to use than convert into what you need. good luck,

[marthale7]

I also have tried the alternator bit. But.... it takes much much more torque than what you have there in that wheel for he alternator. The alternator turns easy yes, but if you load that alternator then the torque will kill the wheel, unless you have a very very light load. thanks for sharing!.

[MrAnguswangus]

@marthale7 Yes thanks. When I made this vid I was just learning about this type of stuff...I'm more of a human biology guy. Check out some of my other vids and you will see that the trick is in the switching..."oglundasotarn" has also done this. Now I'm playing with HV. I have really learned a lot since this vid. Thanks anyway.

[fitzgerald95971]

@marthale7 maybe he could use a wheel with more weight to help it keep turning with perpetual motion.

[PhotonDrive]

I had that same load-feedback problem. I solved it by putting capacitors between the output & the load. Output Diodes didn't seem to stop phen. to my amazement! You can see my methods at "Mag Amp Gen" vids, including running 24" mag-Drive 500w wheel. Also, trying to charge batteries (for added output & in-motion increase) SLOWED DOWN my generators - again to my amazement! Good luck, but I suggest you build your own, not use old-tech Alt. etc.

[jaymcd84]

have you tried the neodimium or whatever magnets? theyre a lot stronger than the black ones i believe. so you can have a lighter machine, less work on the load or somethin.

[jaymcd84]

IM SO JEALOUS, GREAT WORK! i wish my fiance would let me set up leedskalnins expirements in my apartment haha.

[MrAnguswangus]

Just put a hypnotist's spiral on the wheel and she may not notice...maybe other perks too...lol

[MrAnguswangus]

Ahh yes. I've heard it called "flyback" but I'm convinced it's not back emf. I try to avoid conversations with people who give the impression of never getting it. It is tiring. As you know (Monkey), these things will reclaim dead batteries. I don't think emf can do that...that's why they call'em "dead." The energy that comes out of these can do things that conventional energy cannot. Also, thanks monkey for all of the great reading tips :)

[helpmonkey]

nice work Mr Angus .... just remember its not back EMF doing the work Bedini only uses this term on his patent apps because radiant energy dosnt exist at the patent office. Bedini says concentrate on the waveform... read "A Working Radiant Free Energy System" on scribd the author Ossie Callanan and he says the way to increase the power of the SSG is to use multiple pulses as the magnet passes the coil. This would make sense as the current thinking is that the vacuum is at a very high frequency.

[MrAnguswangus]

I hear what you are saying...my point was, that the weight (although taking more time to get up to speed) provides the momentum to drive an alternator. Thanks for the input and keep your stick on the ice.

[MrAnguswangus]

I believe the torque comes from the weight of the wheel. It is now 3 times heavier. Ed Leedskalnin's wheel was cement (very heavy). It takes longer to get up to speed and it's much harder to stop by hand. Bedini's original had a 20lb flywheel. I accidentally got my finger in the magnet's radius while it was at full speed last week and it bruised the tip badly :)

I use the SSG circuit. 1 circuit has no pot. I haven't measured the A. I will have more time to work on it in about a week.

[vbi2dd103Abgr]

Hi.. nice work!

i believe the source of energy is coming from joining of 1) inertial moment kinetic torque as fly wheel system, 2)magnetic deattractive law, push of pulse magnetic + driver coil to eliminate kinetic friction and 3)energy pick up of magnetic generator electric induction (emf and back emf).

I think, once u increase the magnet strength means u increase the torque, rpm and i think it will affect to increase ampere result

Sorry for the english!

[captainpecan]

5 from me also.

I am interested though in why you say your getting so much torque from that? Are you using the normal SG circuit, or are you pushing more amps to your coils? Just curious because my SG had low torque, because it appears to only have enough on time to allow the magnets to pass by. How many amps are you pulling?

[querdenker79]

5 Stars for this Tape.

Nice design and nice work.