What's the advantage to having the neutral plates. I have 6 in my car 1 neutral. great production at 18 amps gives me 32 to 38 mpg with a 3800cc or 3.8 liter engine. if I raise the amps to 22 I get 42 to 48 mpg. My engine lit comes on though. Gen sits in the front of the car in front of the radiator. and is cooled while I drive. sodium hydroxide electrolyte, caustic. what is the plus of the neutral plates.
Were are you getting your Stainless Steel radiator from? I need to get one for myself. Thanks for giving me the alternet water tank to get rid of the bubbles in the radiator/pump. Thats what destroyed my last pump.
hi freekonaleesh2, go to Lytron's web site and look at their heat exchangers. bit pricy. any heating and cooling contracor can source a similar one for you. fizzy
Nice setup but too much amps try to look at Fordenergy dry cell it is running 25 amps and he stats that it is not getting hot and production is 1 lpm in 32 second
hi najman100, i intend to throttle back the amps but i want to make sure the rig can take at least 50 just to be safe. i'm thinking about adding more plates. seems to me the dry and wet are not all that different if you can seal the edges of the plates. what happens when a dry cell goes boom? i don't see any pressure release on those rigs. mind you, i will be testing a dry cell as soon as scarecrow is ready to deliver his brick. fizzy
Did you know that if any water/KOH touches anything other than SS or Brass it will disappear into hho without any power? So yes you need a ss radiator and your pump will need SS parts. Might be something to double check So I wouldn't leave any water/KOH in the radiator your using at the moment. Keep up the good work!
hi deltahho, the only non ss is in the rad and i purge it immedidiately after testing. the equipment has pressure release and gas escape valves on all the units so it is sucking in air once i purge the system. i will be adding another unit and then try to run the lawnmover. should be fun. fizzy
What's the advantage to having the neutral plates. I have 6 in my car 1 neutral. great production at 18 amps gives me 32 to 38 mpg with a 3800cc or 3.8 liter engine. if I raise the amps to 22 I get 42 to 48 mpg. My engine lit comes on though. Gen sits in the front of the car in front of the radiator. and is cooled while I drive. sodium hydroxide electrolyte, caustic. what is the plus of the neutral plates.
speakoutbrad 1 year ago
can you say where you get the bubbler material thanks
cbloiber 3 years ago
What is the insulator coating?
flipster12000 3 years ago
Wow this is very interesting...
MyHobgoblin 3 years ago
that is really education for me:)
ty
JohnyBravoSix 3 years ago
Were are you getting your Stainless Steel radiator from? I need to get one for myself. Thanks for giving me the alternet water tank to get rid of the bubbles in the radiator/pump. Thats what destroyed my last pump.
freeekonaleesh2 3 years ago
hi freekonaleesh2, go to Lytron's web site and look at their heat exchangers. bit pricy. any heating and cooling contracor can source a similar one for you. fizzy
FIZZYH2O 3 years ago
Real nice clear layout/set-up/vid ! thanks,Bill
madbillt66 3 years ago
A Lawnmover yes this should be fun to watch can not wait!
deltahho 3 years ago
Nice setup but too much amps try to look at Fordenergy dry cell it is running 25 amps and he stats that it is not getting hot and production is 1 lpm in 32 second
najman100 3 years ago
hi najman100, i intend to throttle back the amps but i want to make sure the rig can take at least 50 just to be safe. i'm thinking about adding more plates. seems to me the dry and wet are not all that different if you can seal the edges of the plates. what happens when a dry cell goes boom? i don't see any pressure release on those rigs. mind you, i will be testing a dry cell as soon as scarecrow is ready to deliver his brick. fizzy
FIZZYH2O 3 years ago
Did you know that if any water/KOH touches anything other than SS or Brass it will disappear into hho without any power? So yes you need a ss radiator and your pump will need SS parts. Might be something to double check So I wouldn't leave any water/KOH in the radiator your using at the moment. Keep up the good work!
deltahho 3 years ago
hi deltahho, the only non ss is in the rad and i purge it immedidiately after testing. the equipment has pressure release and gas escape valves on all the units so it is sucking in air once i purge the system. i will be adding another unit and then try to run the lawnmover. should be fun. fizzy
FIZZYH2O 3 years ago