Christ, if you can spend so much money on these Gundam models, the least you can do it is buy a new mic! I enjoy your videos but you sound as if your trachea has been run though a meat grinder and then resynthesized using auto tuning software. It sounds downright terrible.
Deathscythe629 i just give an exemple, that dosent mean i break my kit's, that would be stupid, i just want to say you, that there is no point on being rude, just because other people's actions, on their own Kit's, just keep calm, explain yourself, but push it too hard, you shoul not be the one o decide if he/she deserve's it or not, i'm not like a enemy of you or something
to get the arms to stay on try my strategy, take like a tiny piece of paper towel (since its more sturdy than tissue) and put it between the joints then attach them!
my deathscythe dosent have any of the issues stated in the video, the arms are tight and the whole knee issue isnt a problem for mine, the knee part thats spose to slide as u bend the legs all depends on the tiny hole that u have to push the knee assembly against and ive only built 3 kits and i got it first time, also so far the skirts havent poped off mine but i do see how they could once theyve been moved about from posing
I didn't get this kit yet but it looks like u just have to push the arm in from under the shoulder, since u have to push the arm joint thru the whole to connect the shoulder, u mite not get the initial tightness. Had the same issue with my Gundam 2.0 at first. And as for the skirt, well their on ball joints so can't rlly nick pick bout that.
I actually always wonder if Bandai's gonna make a 1/100 MG of the Original Gundams from Wing Series... Not Ver. Ka, Not EW vet. But just the plain, normal version... I wish they would do that.. nice review btw!
@jayko657 yes because he made a review before painting it, and he said
"@vegeta8259 sorry to ask but when you made this did you find the arms and side armor just popping off easily? cause I've seen Prime92's review and the arms and side armor just came popping off every second of the review
garrison778
@garrison778 Some people had that problem. I didn't. I think it may be a case of people not assembling their kits correctly...
Deathscythe629 is right you should never play with them that's like saying your going to play with a priceless museum sculpture it's insulting to the model and to people who actually care about they're models.
u just have to take off the shoulder armor then attach the shoulder back to the peg. it will click and will be very stable. then attach the shoulder armor again. voila no more loose shoulders
@jayceeclone where the arm connects really is just shitty. i have this model and mine is the same way, the arms love to come off. that was my only complaint though. other than that great model once its finally done.
I remember when you did your 1/144 HG Deathscythe Hell and said "I'm all in favor of this..... " and well now when you see this 4:33 its really disappointing
I myself just got this kit and assembled it, now of course its a model and not a toy, but even still, the parts fall off way to easy even for a model, just trying to adjust it for a simple pose is a mission, once it is adjusted its fine, thanks for the vid, nice to know it is a common prob with this gundam, def wont be changing its pose often!
@TTTgundams it was the deathscythe hajime katoki designed- basically it was the tv equivalent. and it could have been worse, they could have given it no scythe
@hhamor if you want to play with your kits buy 1/144 HGs. they are much more cheaper than MGs and easily replacable. dont go and buy a 1/100 MG just to play with it and break it. THEY COST LOTS OF MONEY. The MGs are made for display
One thing you guys have to understand, these are model kits and they aren't made to be play with like action figures, you build them, put them in a cool pose then you leave them for display. They ARE NOT toys and shouldn't be touch or tamper with too much or the joint will be loosen and something can break.
Did you not understand what I just said? THEY ARE NOT TOYS, they're not made to be tampered with too much or the joint will be loose and arms and knee could fall off and the V fin could break. I pay for mine because I like building and painting them, it's called a HOBBY. I set them in a pose and leave it for display simply to admire and appreciate. THEY ARE NOT TOYS!! Get it to your damn thick skull and don't ask me stupid questions again esp. you
@Deathscythe629 Still,you pay like $40.00 for a model that you cant even play with in like forever,eventually you have to play with it,a lot,otherwise it's a waste of money.
BTW:Dont be such a rude person,there are ways that you can criticize without being such a troll.
@hhamor I only "play" with my model kits when I just finish building it and trying to figure out a good pose for the gundam, other than that it isn't a toy and isn't made to be played with. Anyone who thinks you can "play" with it is either a little kid or an adult who is new to model kits. If you think it's a waste of money then don't buy it but if you choose to "play" with your model kit than don't bitch about loose joints and arms/legs falling apart, ITS NOT A TOY!!!
@hhamor BTW don't call me a "troll" you don't even know what it means, don't hate me because I simply said something true. If anything you're a troll for criticizing what I say, if you don't know what the hell you're talking about don't argue with people who do.
@hhamor You're not supposed to play with a MG nor any 1/60, 1/100, 1/144 Gundam. I did when I was a 12years old kid and broke many articulations so I know what I'm talking about. Nevertheless, you can still do great poses with different gundams, making "frozen fight scenes" which is kinda fun but I guess everyone has a different version of fun : display, building, scenes, painting, playing (heck you can but don't move them too fast), etc... Just be careful with it, I guess.
@hhamor Well, I don't 'play' with mine per se. I do stopmotion with them (1/144) and they work out just fine. Others use 1/100 for stopmotion for better scenes and movements, but they are expensive, etc. The 1/144s are better for playability but for looks and just showing off what you have, the 1/100s are better.
@hhamor Actually no.....even with the sturdy MG or models there are some weak points of articulations, meaning some joints can still fall apart if you move it too much. For example the famous V-fin we see on almost all gundams are still breakable despite the rest of the body and armor are "sturdy". MG Wing Zero Custom is another example, the feathers on his wings keep falling off if you move them too much.
@Deathscythe629 I agree. I hate it when people don't care if they break them. I mean why buy a $50+ kit if your just going to break the shit out of it. Gundam kits should be off limits to be purchased by morons.
@jayceeclone Thats another conversation. i do agree though, if people intentionally break pieces off of their models to weather them or make them look battle damaged thats cool cuz thats part of the hobby but having a 8 year old kid playing with and breaking a model kit is just a waste of money and time spent by both the builder and the manufacturer of the kit. i mean i wouldnt sell my kits even for $500 if i knew the kid was just going to break it.
@Deathscythe629 Well that depends on what grade is it for example if it's a cheap 5 or 6 dollar FG like if one day you are playing with it and suddenly you broke it's arm or leg you won't be that sad about it right or if it's a PG that costs like 2 or 3 hundred dollar and one day you are playing with it and it broke then you will feel sad so it only depends on what grade it is.
@EyeOfDarkness0 yeah I see what you mean. I just think you shouldn't be playing with these delicate kits. Just because they're MG or PG doesn't make them "playable", even HG. There's a difference between an ACTION FIGURE and a MODEL KIT. These stupid morons new to Gundam modelling don't know the difference and they're arguing.
@Deathscythe629 u are such a moron . she is doing this so u can decide if u want to buy the kit or not and what kind of poses u can make. she knows ur not suposed to play with them. i think u are just stupid dispite the words u used. stop comenting people when u dont know them. but i do agree that they are for display instead for playing.
@gundamnexus Wow do you at least fuckin read before you post? If she knows you're not suppose to play with them then she shouldn't be bitching about loose joints. Read or re-read the comments again. You're one to talk, don't call people stupid when your spellings is at a Kindergarten level, when you type like shit you just look stupid so STFU. "Stop commenting people when you don't know them", you doing the same thing to me dumbass. If you agree then just leave it as that. Moron.
@MrPoseidon99 See it's your kind of selfish attitude is to why our country economy is bad. Everything is "me,me,me, and mine,mine mine, and non of your business what I do with it" is why our country is going down the slump. What would you say if somebody bought a Ferrari and wreck it? Just wreck it like a spoiled little teenager, then do you think he/ she should have it? Money can't buy everything, just because you can pay for it doesn't mean you should have it.
@hhamor I agree with you kid, but i have to say you should understand those kind of of people who tells other people what to do with there stuff like gundam models are only for displays. If you want to play with it then play with it cause its yours (I play with mine also ^_^)
@gundamnexus Your stupidity is beyond annoying, there are many reasons as to why the joints are loose, and playing with them is one of the reason. Bad built, sanding down the parts, bad parts, hot environment, etc. are all possible reason why the joints are loose and esp. playing with them. You must be new to modelling or else you wouldn't ask such a stupid question, and don't call me a "moron" when I'm clearly smarter than your dumbass.
@Skywarp915 Yes you sir are a true modeler or an experience one. The rest of these dimwits that complains about loose joints either didn't build them properly or play with it too much, like the moron that made this video....
I was planning on getting this but I think I'll pass...I like the design and stuff but switching hands often is kinda annoying..bandai should've give us the normal manipulators and just put a peg on the weapon like on the latest HG's..
and I think I know why bandai will reissue a new Wing ver.ka..not just because of the color but because of the hands and stability..
The shoulders can easily be fixed btw, just grab some liquid polyurethane (I use Fusion one) and some cotton swabs/brush. All you have to do is brush the peg with a thick layer of the polyurethane and also some to the hole connecting the part to the peg. The polyurethane hardens, but remains flexible so this is just a way to tighten the limbs. I used this for my WZC's hands which have such a terrible grip, now I own the buster rifle pose.
they should have given the wing gundam ver ka a pegged hand so the beam saber and buster rifle would at least stay in place like what they did with this guy's hand
Just put paint on the pegs, that will stiffen the joints up.Maybe the reason it is loose is because of the shoulder pads hitting the side of the body push the arms away from their already smallish pegs.
Ya know, I just finished building this kit last week, and the only issue I've had with parts were the back skirts. The arms are actually held on very nicely, and they never pop off. I loved this kit so much that I will probably be springing for Heavyarms and sandrock when they're released.
Prime, this kit is the Endless Waltz Anime version from Katoki, the one thats releasing in a month or so is the Endless Waltz OVA/Movie version of Deathscythe Hell, which looked a bit different
Lol just finished my mg deathscythe and I have none of these problems you move the kit way to much weaking the joints and pegs that might be the problem
@Thefatbatman88 its possible Prime92 is using the Knockoff version which she hasnt said so far so im not sure, she usually uses the Knockoffs for reviews cus their easier on your wallet or something, but im not sure if this a Knockoff or not, though it could just be one of those random "bad" kits, i mostly saw this with the HG 1/100 Gundam Wing kits, basically you buy a kit, that 1 has really loose joints, buy another of the same kit and the joints are nice and firm, it just happens sometimes
@Lavos2007 I also have this kit, the problems are indeed present. however if you take care then they don't tend to happen. the one complaint i have for this kit is the thumbs on mine seem to be pretty loose.
when will the ew version come out, im planning on geting a wing and a deathscythe to display, i was going to get this one + wing ver ka, but now i think id be better to get wing ew and deathscythe hell ew.
hei prime92, when u spray paint ur kits wit normal spray paint, do u got uneven or rough spots on ur kits surface?! mine always had that problem!? T_T
Wow, sorry to see your Gundam falling apart Prime, it's like you got the one that is trying to self-destruct. Did you get this one from HLJ? Maybe they got a bad batch of them. I hope to get all five of these too, I got into Gundam with Gundam Wing, I searched for years to get them all in the no-grade 1/100 but they had to go and make a completely different version. *Sigh....*
i like the model i guess but not as much as the no grade even. i'm just not that big of a fan of the var ka gundam kits. especially the gundam wing series. i'm just a purist for that haha.
I would right now be pulling my hair out with all these falling off! I can't beleive bandai would fuck up this kit. And what's the deal with the hands now. I know they are up to some shenanigans now ever since they started to release recyclable HG kits lately. You have to glue all those skirt armor before you lose those parts. Now I'm starting to think I should be my kit.
Patient is a virtue and you have lots of it Primey!
i just have my deathscythe recently, the joints on the arm and leg split when i move them...!!Also, i think bandai should give it the hand like sinanju have since its very articulated,PG style!!
I usually glue on the parts that are prone to falling off,but obviously you can't just glue that arm on,maybe spread some super glue around the end of that arm peg to make it a tiny bit bigger? it should make the fit a bit more snug without ruining the articulation
WHOA OH. I ordered this kit and i dunno what im gonna do seeing your kit with its pieces falling all over the place. its funny though. well maybe i'll laugh at myself soon
Prime, another great video! You had me laughing out loud with your frustration with all the parts falling off... this is why you're our favorite Gundam enthusiast on Youtube!
The knees don't rise up with the rest of the leg because the kneeguards are too heavy for the joint inside. I found that if you can find a way to keep pressure on the knee's inner frame (the grey parts that combine the lower leg and thigh), that the knees will indeed then rise as they're supposed to. You can do it just my pushing it with your fingers, but obviously this won't work when it's assembled.
I honestly agree with what ZR0Ver2 is saying, it's just that 'lazy' can be interpreted in different ways, coloured peices are for people who want an easy build or who can't paint etc, it's a 'tactic' to get more customers. There's nothing wrong with making Gunpla out of the box though, I'm sure most painters start off without painting.
It's worth noting that the other Wing MG models that have been on display aren't official announcements but mere 'feelers' for the moment. If the MG Deathscythe doesn't sell well then they might not even bother releasing the rest.
As for your issues with this kit, I do hope that most of them can be remedied. I think it was ZR0ver2 that showed me the MG Blue Frame stayed together if you pushed the joints together until they clicked. Sure there must be a workaround if we put our heads together :)
athough you and jabaman (and others) have had the same problem, my deathscythe held together fine at the shoulders, and I ha little problem with the hands. I know it doesn't change anything for you, just putting that out there for others who might want the kit.
hey I've got a suggestion... why don't you paint the joints to get more volume add it would become slightly larger and it would stiffen up the joints or you could also super glue and let dry... that's what i did w/ my MG F91 and HG Overflag. ;) hope this helps...
Nop, she is right... the arm is a HUGE problem... it should be longer with all the movement in the arms... not just hers, mine did the same thing. Compare to the other MG grades and you guys will know what she is talking about. I even painted an clear coated mine and the joins were still loose.....
Prime, you got to start being more careful with your kits, every kit you have some kind of issue with it, loose joint, broken part, defected plastic... etc. and you always say maybe its just mine, well guess what, its probably not the kits fault, and mostly yours, if every gundam you build is different/crappier then other peoples, guess what your doing something wrong, and try to fix it at lease, instead of gluing every effing piece together. you just got to be more careful with your kits
@henryizer wow, insulting people. douchebag go get a live. what qualifications do you have to judge about her building skills. i build a gundam be4 and i'm being very careful with it and guess what the joint fell off and i did nothing wrong with it. it;s the factory's fault. and ur being like"ohhhh bandai make no mistake, their kits are perfect,and the joint fell off becuz of ur shitty skill prime92.
@KiraYamato636 i back u up on that bro!! i also like prime review very much! so,if there is some fallen joints on other kits, thats the factory fault!! my deathscythe the same,especially the arm and leg joints, they split when i move them!!
@KiraYamato636 Have you seen the comment she made? "Good advice. It's a good thing I don't have over 400 gundam kits under my belt..wait..." im insulting her because of her cockiness and how she thinks that she is the best because she has 400+shitty kits, have you seen her past videos? every review theres something wrong with a kit that doesnt happen to anyone else. And Bandai does make mistake, but WAY less mistake then she makes, i build the exact same kit and had NOTHING Wrong with it, WHY?
@henryizer stfu, if you hate her then go away no one asked you to watch her video and leave some shitty ass comments, don't for get she has more experience than all of us. if you think she's cocky then prove it you jackass
@henryizer If Prime92 is cocky, let her. If you don't like it, no one stopping you from watching her reviews. I believe everyone has their own opinions. If your kits work fine on you, cool, but it doesn't give you the right to accuse Prime's kit is built wrong by her skills. There are some kits that are either good, or bad, because it's random. My1/144 HG AEU Enact was really bad, but someone's review on it, was better than mine. It's not how much you put on the kit, but also on the quality.
You sound a bit mad in this video... =P
kwmkc13 1 month ago
This has been flagged as spam show
Christ, if you can spend so much money on these Gundam models, the least you can do it is buy a new mic! I enjoy your videos but you sound as if your trachea has been run though a meat grinder and then resynthesized using auto tuning software. It sounds downright terrible.
Getanewmic 2 months ago
the camera on Deathsythe's crotch is used to see below him. I know this because I have and old VHS that shows the schematics for it
rulerofmetroid 2 months ago
have a flu?
onemorelate 2 months ago
Deathscythe629 i just give an exemple, that dosent mean i break my kit's, that would be stupid, i just want to say you, that there is no point on being rude, just because other people's actions, on their own Kit's, just keep calm, explain yourself, but push it too hard, you shoul not be the one o decide if he/she deserve's it or not, i'm not like a enemy of you or something
MrPoseidon99 2 months ago
I found this Dragon Momoko Death Scythe from a local hobby store for roughly $20 a hell lot better than GHD and TTH.
GunplaMeister2011 4 months ago
@GunplaMeister2011 also the plastic quality n detail is 100% similar to bandai's
ABCba5tard 3 months ago
to get the arms to stay on try my strategy, take like a tiny piece of paper towel (since its more sturdy than tissue) and put it between the joints then attach them!
T33RO 5 months ago
lmfao, the parts keep comming off like its in self detination mode!!! XD
T33RO 5 months ago
my deathscythe dosent have any of the issues stated in the video, the arms are tight and the whole knee issue isnt a problem for mine, the knee part thats spose to slide as u bend the legs all depends on the tiny hole that u have to push the knee assembly against and ive only built 3 kits and i got it first time, also so far the skirts havent poped off mine but i do see how they could once theyve been moved about from posing
reaperX08 5 months ago
pennis camera
noname77777777777777 5 months ago
i didnt have any prooblems with my deathscythe. maybe you are just unlucky
bobing 5 months ago
@bobing Well,she has always been unlucky with her model kits XD
jayko657 5 months ago
I didn't get this kit yet but it looks like u just have to push the arm in from under the shoulder, since u have to push the arm joint thru the whole to connect the shoulder, u mite not get the initial tightness. Had the same issue with my Gundam 2.0 at first. And as for the skirt, well their on ball joints so can't rlly nick pick bout that.
bransen2099 6 months ago
for such a new thing, it does fall off so much....--" i better rethink of buying it...-.-;
graviron 7 months ago
I actually always wonder if Bandai's gonna make a 1/100 MG of the Original Gundams from Wing Series... Not Ver. Ka, Not EW vet. But just the plain, normal version... I wish they would do that.. nice review btw!
anthrmthrfckr 7 months ago
the arm pegs of vegeta 8259 are fine, anda even the front scourt
MrPoseidon99 7 months ago
@MrPoseidon99 Lol yeah.Maybe it's because he painted it...then again they were fine even before painting...
jayko657 7 months ago
This has been flagged as spam show
@jayko657 yes because he made a review before painting it, and he said
"@vegeta8259 sorry to ask but when you made this did you find the arms and side armor just popping off easily? cause I've seen Prime92's review and the arms and side armor just came popping off every second of the review
garrison778
@garrison778 Some people had that problem. I didn't. I think it may be a case of people not assembling their kits correctly...
vegeta8259
MrPoseidon99 7 months ago
Wing type MG was way better, I change my mind on this kit, I ain't getting it
Aileflyer 7 months ago
deathscythe self-detonated lol
Shadowkrai96 7 months ago
Deathscythe629 is right you should never play with them that's like saying your going to play with a priceless museum sculpture it's insulting to the model and to people who actually care about they're models.
kylenator16 7 months ago
u just have to take off the shoulder armor then attach the shoulder back to the peg. it will click and will be very stable. then attach the shoulder armor again. voila no more loose shoulders
MegaPa0lo 8 months ago
-_- what hhamor say? it says comment removed wat did he say
triforce638 8 months ago
i think with the arm you did the body for the arm kindy wrong go brack the body parts and see what wrong with it
jayceeclone 9 months ago
@jayceeclone where the arm connects really is just shitty. i have this model and mine is the same way, the arms love to come off. that was my only complaint though. other than that great model once its finally done.
ryian08 7 months ago
@ryian08 the arm's for me is no problem it not going off it does a 360 spin but the complaint with me is the skirt's but all grades have a problem
jayceeclone 7 months ago
that gundam is cursed lol
LelouchVlBrutania 10 months ago
I remember when you did your 1/144 HG Deathscythe Hell and said "I'm all in favor of this..... " and well now when you see this 4:33 its really disappointing
garrison778 10 months ago
@garrison778 Maybe that's why this thing had an upgrade to become the Deathscythe Hell.It keeps breaking.
jayko657 7 months ago
Dang that thing looks so cool, too bad bout the quality though
Drwhite7017 10 months ago
I myself just got this kit and assembled it, now of course its a model and not a toy, but even still, the parts fall off way to easy even for a model, just trying to adjust it for a simple pose is a mission, once it is adjusted its fine, thanks for the vid, nice to know it is a common prob with this gundam, def wont be changing its pose often!
akadjblaze 10 months ago
Where can you find a preview on the new version of this model?
freedom2001 10 months ago
Your voice is sex.
snufferoo 11 months ago
a deathscyphe hell with a white gundam head and no backpack? WTF WERE THEY THINKING??
TTTgundams 11 months ago
@TTTgundams it was the deathscythe hajime katoki designed- basically it was the tv equivalent. and it could have been worse, they could have given it no scythe
JKim91EX 11 months ago
@hhamor if you want to play with your kits buy 1/144 HGs. they are much more cheaper than MGs and easily replacable. dont go and buy a 1/100 MG just to play with it and break it. THEY COST LOTS OF MONEY. The MGs are made for display
TeamMixup 11 months ago
I wonder if the death hell custom has the same problem
mathexpert9981 11 months ago
@mathexpert9981 nah, the only problem i see with it is that the wrists don't rotate.
thebruteslayer117 11 months ago
Is that a good Gundam to get.
dan121064 11 months ago
is there a conversion kit to change this into the anime version?
OrangeTitan2 1 year ago
@OrangeTitan2 Nah if you want it to Look like the Anime Your going to have to Paint it
RX93Custom 11 months ago
Have no Fear MG Shenlong, Deathscythe Hell ew version plus the MG Gundam Epyon are on the way
MechaMSgundamfan 1 year ago
@MechaMSgundamfan Is Epyon going to get a MG treatment? How do you know?
Deathscythe629 10 months ago
vegeta8259's model didnt fall... maybe its yours
ABCba5tard 1 year ago
@ABCba5tard well he did paint his
JKim91EX 11 months ago
One thing you guys have to understand, these are model kits and they aren't made to be play with like action figures, you build them, put them in a cool pose then you leave them for display. They ARE NOT toys and shouldn't be touch or tamper with too much or the joint will be loosen and something can break.
Deathscythe629 1 year ago
@Deathscythe629 So,people want to play with them,if you dont,why did you pay for it?
hhamor 1 year ago
@hhamor
Did you not understand what I just said? THEY ARE NOT TOYS, they're not made to be tampered with too much or the joint will be loose and arms and knee could fall off and the V fin could break. I pay for mine because I like building and painting them, it's called a HOBBY. I set them in a pose and leave it for display simply to admire and appreciate. THEY ARE NOT TOYS!! Get it to your damn thick skull and don't ask me stupid questions again esp. you
Deathscythe629 1 year ago 22
Comment removed
hhamor 1 year ago
@Deathscythe629 Still,you pay like $40.00 for a model that you cant even play with in like forever,eventually you have to play with it,a lot,otherwise it's a waste of money.
BTW:Dont be such a rude person,there are ways that you can criticize without being such a troll.
hhamor 1 year ago
@hhamor I only "play" with my model kits when I just finish building it and trying to figure out a good pose for the gundam, other than that it isn't a toy and isn't made to be played with. Anyone who thinks you can "play" with it is either a little kid or an adult who is new to model kits. If you think it's a waste of money then don't buy it but if you choose to "play" with your model kit than don't bitch about loose joints and arms/legs falling apart, ITS NOT A TOY!!!
Deathscythe629 1 year ago
@hhamor BTW don't call me a "troll" you don't even know what it means, don't hate me because I simply said something true. If anything you're a troll for criticizing what I say, if you don't know what the hell you're talking about don't argue with people who do.
Deathscythe629 1 year ago
@hhamor You're not supposed to play with a MG nor any 1/60, 1/100, 1/144 Gundam. I did when I was a 12years old kid and broke many articulations so I know what I'm talking about. Nevertheless, you can still do great poses with different gundams, making "frozen fight scenes" which is kinda fun but I guess everyone has a different version of fun : display, building, scenes, painting, playing (heck you can but don't move them too fast), etc... Just be careful with it, I guess.
Kuonluw 1 year ago
@Kuonluw I think that sturdy models can handle being played despite models being fragile.
hhamor 11 months ago
@hhamor Well, I don't 'play' with mine per se. I do stopmotion with them (1/144) and they work out just fine. Others use 1/100 for stopmotion for better scenes and movements, but they are expensive, etc. The 1/144s are better for playability but for looks and just showing off what you have, the 1/100s are better.
xaayer 11 months ago
@hhamor Actually no.....even with the sturdy MG or models there are some weak points of articulations, meaning some joints can still fall apart if you move it too much. For example the famous V-fin we see on almost all gundams are still breakable despite the rest of the body and armor are "sturdy". MG Wing Zero Custom is another example, the feathers on his wings keep falling off if you move them too much.
Deathscythe629 10 months ago
@hhamor So far, the only models I know worth playing are the gigantic 1/48 Mega Size models.
nightslash3535 1 month ago
@Deathscythe629 I agree. I hate it when people don't care if they break them. I mean why buy a $50+ kit if your just going to break the shit out of it. Gundam kits should be off limits to be purchased by morons.
FeelinGipper 11 months ago 14
@FeelinGipper to make a battle damage?
jayceeclone 7 months ago
@jayceeclone Thats another conversation. i do agree though, if people intentionally break pieces off of their models to weather them or make them look battle damaged thats cool cuz thats part of the hobby but having a 8 year old kid playing with and breaking a model kit is just a waste of money and time spent by both the builder and the manufacturer of the kit. i mean i wouldnt sell my kits even for $500 if i knew the kid was just going to break it.
FeelinGipper 7 months ago
@FeelinGipper ya i know giving it to a little kid is just a waste of good money and time, but if was a first grade then i give
jayceeclone 7 months ago
@FeelinGipper so true! i really hate persons that are thinking too high of themselves and treat hobby and my gunpla's like they are just a kid's toy
bannedka666 5 months ago
@Deathscythe629 Well that depends on what grade is it for example if it's a cheap 5 or 6 dollar FG like if one day you are playing with it and suddenly you broke it's arm or leg you won't be that sad about it right or if it's a PG that costs like 2 or 3 hundred dollar and one day you are playing with it and it broke then you will feel sad so it only depends on what grade it is.
EyeOfDarkness0 7 months ago
@EyeOfDarkness0 yeah I see what you mean. I just think you shouldn't be playing with these delicate kits. Just because they're MG or PG doesn't make them "playable", even HG. There's a difference between an ACTION FIGURE and a MODEL KIT. These stupid morons new to Gundam modelling don't know the difference and they're arguing.
Deathscythe629 7 months ago
@Deathscythe629 Yeah you're right
EyeOfDarkness0 7 months ago
@Deathscythe629 u are such a moron . she is doing this so u can decide if u want to buy the kit or not and what kind of poses u can make. she knows ur not suposed to play with them. i think u are just stupid dispite the words u used. stop comenting people when u dont know them. but i do agree that they are for display instead for playing.
gundamnexus 6 months ago
@gundamnexus Wow do you at least fuckin read before you post? If she knows you're not suppose to play with them then she shouldn't be bitching about loose joints. Read or re-read the comments again. You're one to talk, don't call people stupid when your spellings is at a Kindergarten level, when you type like shit you just look stupid so STFU. "Stop commenting people when you don't know them", you doing the same thing to me dumbass. If you agree then just leave it as that. Moron.
Deathscythe629 6 months ago
@Deathscythe629 lol you shouldn't say that, since it's me who pays my kit, i guess i can use them like toys, because, it's not your business.
P.S: Sorry for my bad english.
MrPoseidon99 2 months ago
@MrPoseidon99 See it's your kind of selfish attitude is to why our country economy is bad. Everything is "me,me,me, and mine,mine mine, and non of your business what I do with it" is why our country is going down the slump. What would you say if somebody bought a Ferrari and wreck it? Just wreck it like a spoiled little teenager, then do you think he/ she should have it? Money can't buy everything, just because you can pay for it doesn't mean you should have it.
Deathscythe629 2 months ago
@hhamor I agree with you kid, but i have to say you should understand those kind of of people who tells other people what to do with there stuff like gundam models are only for displays. If you want to play with it then play with it cause its yours (I play with mine also ^_^)
raikutsu918 9 months ago
@Deathscythe629 Well, if your so clever then tell us why the freakin joints are loose, 'moron' !
gundamnexus 6 months ago
@gundamnexus Your stupidity is beyond annoying, there are many reasons as to why the joints are loose, and playing with them is one of the reason. Bad built, sanding down the parts, bad parts, hot environment, etc. are all possible reason why the joints are loose and esp. playing with them. You must be new to modelling or else you wouldn't ask such a stupid question, and don't call me a "moron" when I'm clearly smarter than your dumbass.
Deathscythe629 5 months ago
when i built this guy i didnt have any problems wit parts falling off probably cause i made sure they snapped into place
Skywarp915 1 year ago
@Skywarp915 Yes you sir are a true modeler or an experience one. The rest of these dimwits that complains about loose joints either didn't build them properly or play with it too much, like the moron that made this video....
Deathscythe629 10 months ago
I was planning on getting this but I think I'll pass...I like the design and stuff but switching hands often is kinda annoying..bandai should've give us the normal manipulators and just put a peg on the weapon like on the latest HG's..
and I think I know why bandai will reissue a new Wing ver.ka..not just because of the color but because of the hands and stability..
kasmichan 1 year ago
4:36 Deathscythe: YOU ARE TEARING ME APART PRIME 92!
trewerd 1 year ago
The shoulders can easily be fixed btw, just grab some liquid polyurethane (I use Fusion one) and some cotton swabs/brush. All you have to do is brush the peg with a thick layer of the polyurethane and also some to the hole connecting the part to the peg. The polyurethane hardens, but remains flexible so this is just a way to tighten the limbs. I used this for my WZC's hands which have such a terrible grip, now I own the buster rifle pose.
ChoZenHwan 1 year ago
they should have given the wing gundam ver ka a pegged hand so the beam saber and buster rifle would at least stay in place like what they did with this guy's hand
muramasa25 1 year ago
Finger Nail Polish :) or putty :D
TrueInnovade 1 year ago
I think they forgot most people want the pieces to stay on the model when you finish it.
TheJoukyuu 1 year ago
I though this was an awesome kit until I saw the whole video.. it makes me sing "London Bridge is Falling down falling down falling down.." Fail
02Jc19 1 year ago
Just put paint on the pegs, that will stiffen the joints up.Maybe the reason it is loose is because of the shoulder pads hitting the side of the body push the arms away from their already smallish pegs.
larabou1 1 year ago
Just put paint on the pegs, that will stiffen the joints up.
larabou1 1 year ago
Ya know, I just finished building this kit last week, and the only issue I've had with parts were the back skirts. The arms are actually held on very nicely, and they never pop off. I loved this kit so much that I will probably be springing for Heavyarms and sandrock when they're released.
falc0n23 1 year ago
for some rysone mine stays to gether very well but my head is very loos
kuni145 1 year ago
just finished building my MG DS but i dont have any probs with my arms. theyre really stable.
dominickmahinay 1 year ago
@dominickmahinay same here my arms are fine WOOOO *high five*
Mrkazam0 1 year ago
well i jsut ordered this MG Kit on Hobby Link Japan, lets hope mine is like that one guy who commented here that didnt have problems with his kit
Lavos2007 1 year ago
Prime, this kit is the Endless Waltz Anime version from Katoki, the one thats releasing in a month or so is the Endless Waltz OVA/Movie version of Deathscythe Hell, which looked a bit different
Lavos2007 1 year ago
This mans thumbs dishonour me
Mrkazam0 1 year ago
@Mrkazam0 this is a girl
bjlok330 1 year ago
@bjlok330
not a chance i believe that. those hands are not female hands
Mrkazam0 1 year ago
@Mrkazam0 Watch one of her something specials. dont make fun of her i think shes cool so shut the fuck up
bjlok330 1 year ago
@bjlok330
i wasnt making fun all i was saying is that the yeti wants its hands back
Mrkazam0 1 year ago
@Mrkazam0 Thats making fun of her like i said shes cool so shut up!
bjlok330 1 year ago
This has been flagged as spam show
Awesome model dude! LMAO at 4:30. Check out my channel. I have the Perfect Grade 1/60 scale Wing Gundam Ver. Ka.
Leonhart306 1 year ago
Awesome model dude! Check out my channel. I have the Perfect Grade 1/60 scale Wing Gundam Ver. Ka.
Leonhart306 1 year ago
Lol just finished my mg deathscythe and I have none of these problems you move the kit way to much weaking the joints and pegs that might be the problem
Thefatbatman88 1 year ago
@Thefatbatman88 its possible Prime92 is using the Knockoff version which she hasnt said so far so im not sure, she usually uses the Knockoffs for reviews cus their easier on your wallet or something, but im not sure if this a Knockoff or not, though it could just be one of those random "bad" kits, i mostly saw this with the HG 1/100 Gundam Wing kits, basically you buy a kit, that 1 has really loose joints, buy another of the same kit and the joints are nice and firm, it just happens sometimes
Lavos2007 1 year ago
@Lavos2007 I also have this kit, the problems are indeed present. however if you take care then they don't tend to happen. the one complaint i have for this kit is the thumbs on mine seem to be pretty loose.
shinigami223 1 year ago
prime95 FAIL XD
transformerszx 1 year ago
4:40 LOL VOICE CRACK
aeminence 1 year ago
Deathscythe special power parts fall of you want to die
dankithox 1 year ago
lol I can't stand my RG-RX78-2 Gundam so I glued mostly all of the parts that falls off.... XD
ShironYamato 1 year ago
Whats up with the audio?
G11354 1 year ago
when will the ew version come out, im planning on geting a wing and a deathscythe to display, i was going to get this one + wing ver ka, but now i think id be better to get wing ew and deathscythe hell ew.
below61 1 year ago
@MrKain2009 yeah,they are!! also, deathscythe hell custom is going to be release too!! XD
unbourn 1 year ago
try putting clear nail polish on the parts that are loose like the arm connector it'll add a little more buff to it to make them a little more thight
player2pushstart 1 year ago
Okay outside of the skirt armor I've had no parts falling off. But bandai please for side skirts make teh ball joints bigger
Kefkaownsall 1 year ago
do you have to build this please answear
AZZA280 1 year ago
@AZZA280 yes u do
thegamer2024 1 year ago
@thegamer2024 thanks
AZZA280 1 year ago
just got the model, the problem might be that you put the wrong arm in the socket since the wrist is suppose to bend DOWN and not up
LLawleit23days 1 year ago
hei prime92, when u spray paint ur kits wit normal spray paint, do u got uneven or rough spots on ur kits surface?! mine always had that problem!? T_T
unbourn 1 year ago
@unbourn :D
KiraYamato636 1 year ago
yeah, mine also had problem. easy to fall off.
tvkusmg 1 year ago
BANDAI is getting lazy,everything would be fine if they just use the wing zero frame design!! the new frame design is a failure!!
unbourn 1 year ago
oops lol
XemovampX 1 year ago
Wow, sorry to see your Gundam falling apart Prime, it's like you got the one that is trying to self-destruct. Did you get this one from HLJ? Maybe they got a bad batch of them. I hope to get all five of these too, I got into Gundam with Gundam Wing, I searched for years to get them all in the no-grade 1/100 but they had to go and make a completely different version. *Sigh....*
steamperegrine 1 year ago
it would be good to use putty. If you dont like putty paint the arm joints and you might glue the skirts
LLawleit23days 1 year ago
i would die if they do a master grade of heavy arms
aceknightking 1 year ago
you fail it your skill is not enough 4:30 - 4:44
simborg95 1 year ago
Duo! Stop hitting the self destruct button! You know we changed it so it'll only fall apart when you press it!
FreedomGundamX10A 1 year ago 21
@FreedomGundamX10A I am really hoping the MG Deathscythe Hell EW Custom will not have the same problems as these.
ChoZenHwan 1 year ago
i like the model i guess but not as much as the no grade even. i'm just not that big of a fan of the var ka gundam kits. especially the gundam wing series. i'm just a purist for that haha.
sjaatime 1 year ago
wow, super articulation
marktalag 1 year ago
deathscythe the fallen
katsuneshinsengumi 1 year ago
@katsuneshinsengumi hahaha, thats a good one!! it fits very well
unbourn 1 year ago
@unbourn well you see it in you own eyes^_^ lol!!!
btw, im sure vegeta8259's kit wasnt this loose,
i mean its really solid,.
i wonder whats with prime's kit,.
mass production accident?
katsuneshinsengumi 1 year ago
its camera shy lol
caboose11795 1 year ago
I would right now be pulling my hair out with all these falling off! I can't beleive bandai would fuck up this kit. And what's the deal with the hands now. I know they are up to some shenanigans now ever since they started to release recyclable HG kits lately. You have to glue all those skirt armor before you lose those parts. Now I'm starting to think I should be my kit.
Patient is a virtue and you have lots of it Primey!
stryderprime 1 year ago
@stryderprime ur right on the hand thing!! why cant bandai use hands like the sinanju&rx-78 2.0 does. those new hand really sucks!! X(
unbourn 1 year ago
-Is reminded of RG Gundam and shivers- T-T The abnormal count of parts falling off has hit the MG line too? D:
oceanavenueExxx 1 year ago
*reads through these comments* Wow, people need to get over themselves. @_@
iHeartAbsol 1 year ago
its a rather boreing looking gundam
blakesblack 1 year ago
i just have my deathscythe recently, the joints on the arm and leg split when i move them...!!Also, i think bandai should give it the hand like sinanju have since its very articulated,PG style!!
unbourn 1 year ago
deathscythe: im crumbling apart help me!
jizdeortega 1 year ago
Lady and Gentlemen! We have our contender for worst kit of 2010 right here!.....
pukka5 1 year ago
I usually glue on the parts that are prone to falling off,but obviously you can't just glue that arm on,maybe spread some super glue around the end of that arm peg to make it a tiny bit bigger? it should make the fit a bit more snug without ruining the articulation
Jason11190 1 year ago
@prime92 u can use super glue at the tip of the peg to increase it's thickness, so tt the arm dun come off so easily.
Dragonman0876 1 year ago
WHOA OH. I ordered this kit and i dunno what im gonna do seeing your kit with its pieces falling all over the place. its funny though. well maybe i'll laugh at myself soon
limepunkrocker 1 year ago
Prime, another great video! You had me laughing out loud with your frustration with all the parts falling off... this is why you're our favorite Gundam enthusiast on Youtube!
ghostdein1 1 year ago
The knees don't rise up with the rest of the leg because the kneeguards are too heavy for the joint inside. I found that if you can find a way to keep pressure on the knee's inner frame (the grey parts that combine the lower leg and thigh), that the knees will indeed then rise as they're supposed to. You can do it just my pushing it with your fingers, but obviously this won't work when it's assembled.
Just so you know.
FallenZyros 1 year ago
love the kit do hope they make the original version or EW versions
dragz1224 1 year ago
ROFL AT 4;36 xD!
Hikirouishike 1 year ago
I agree with you,Prime92.
And I know why it called MG Deathscythe ,cause its parts always fall off again and agian,then make you want to die........=.=''!!!!!
tcmk0812 1 year ago 9
pretty nice looking and i think i like it more than the original, design wise.
Athos523 1 year ago
I honestly agree with what ZR0Ver2 is saying, it's just that 'lazy' can be interpreted in different ways, coloured peices are for people who want an easy build or who can't paint etc, it's a 'tactic' to get more customers. There's nothing wrong with making Gunpla out of the box though, I'm sure most painters start off without painting.
soldier4670 1 year ago
It's worth noting that the other Wing MG models that have been on display aren't official announcements but mere 'feelers' for the moment. If the MG Deathscythe doesn't sell well then they might not even bother releasing the rest.
As for your issues with this kit, I do hope that most of them can be remedied. I think it was ZR0ver2 that showed me the MG Blue Frame stayed together if you pushed the joints together until they clicked. Sure there must be a workaround if we put our heads together :)
navigatorhat 1 year ago
this kits.. seems.. well.. garbage.. parts should not come off that easily..
TheTraveler12 1 year ago
athough you and jabaman (and others) have had the same problem, my deathscythe held together fine at the shoulders, and I ha little problem with the hands. I know it doesn't change anything for you, just putting that out there for others who might want the kit.
filthbacteria 1 year ago
what spray paint do you use?
vonmark12 1 year ago
hey I've got a suggestion... why don't you paint the joints to get more volume add it would become slightly larger and it would stiffen up the joints or you could also super glue and let dry... that's what i did w/ my MG F91 and HG Overflag. ;) hope this helps...
TheKikanalo33 1 year ago
Man for a Model looking really foward to it this one really Suffers on Quality which is really ashamed :c
Ojunix 1 year ago
Nop, she is right... the arm is a HUGE problem... it should be longer with all the movement in the arms... not just hers, mine did the same thing. Compare to the other MG grades and you guys will know what she is talking about. I even painted an clear coated mine and the joins were still loose.....
petersmonkey 1 year ago
the kit is trolling you lol
iskeypx 1 year ago
Prime, you got to start being more careful with your kits, every kit you have some kind of issue with it, loose joint, broken part, defected plastic... etc. and you always say maybe its just mine, well guess what, its probably not the kits fault, and mostly yours, if every gundam you build is different/crappier then other peoples, guess what your doing something wrong, and try to fix it at lease, instead of gluing every effing piece together. you just got to be more careful with your kits
henryizer 1 year ago
@henryizer wow, insulting people. douchebag go get a live. what qualifications do you have to judge about her building skills. i build a gundam be4 and i'm being very careful with it and guess what the joint fell off and i did nothing wrong with it. it;s the factory's fault. and ur being like"ohhhh bandai make no mistake, their kits are perfect,and the joint fell off becuz of ur shitty skill prime92.
KiraYamato636 1 year ago
@KiraYamato636 i back u up on that bro!! i also like prime review very much! so,if there is some fallen joints on other kits, thats the factory fault!! my deathscythe the same,especially the arm and leg joints, they split when i move them!!
unbourn 1 year ago
@unbourn high 5 my friend :)
KiraYamato636 1 year ago
@KiraYamato636 right back at you bro!!! XD
unbourn 1 year ago
@unbourn lol =D
KiraYamato636 1 year ago
@KiraYamato636 we are all brothers of gundam! high 5 brothers!! XD
unbourn 1 year ago
This has been flagged as spam show
@KiraYamato636 Have you seen the comment she made? "Good advice. It's a good thing I don't have over 400 gundam kits under my belt..wait..." im insulting her because of her cockiness and how she thinks that she is the best because she has 400+shitty kits, have you seen her past videos? every review theres something wrong with a kit that doesnt happen to anyone else. And Bandai does make mistake, but WAY less mistake then she makes, i build the exact same kit and had NOTHING Wrong with it, WHY?
henryizer 1 year ago
@henryizer stfu, if you hate her then go away no one asked you to watch her video and leave some shitty ass comments, don't for get she has more experience than all of us. if you think she's cocky then prove it you jackass
KiraYamato636 1 year ago
@KiraYamato636 That's very funny. I checked his account, and he's friends with Prime92. Am I seeing a paradox here?!
WatcherMovie007 1 year ago
@WatcherMovie007 oh really? he's being an asshole XD that's all
KiraYamato636 1 year ago
@henryizer beside that you can see that all the people who had this kits said it has a problem so it's clearly not her FAULT retard
KiraYamato636 1 year ago
@henryizer If Prime92 is cocky, let her. If you don't like it, no one stopping you from watching her reviews. I believe everyone has their own opinions. If your kits work fine on you, cool, but it doesn't give you the right to accuse Prime's kit is built wrong by her skills. There are some kits that are either good, or bad, because it's random. My1/144 HG AEU Enact was really bad, but someone's review on it, was better than mine. It's not how much you put on the kit, but also on the quality.
WatcherMovie007 1 year ago