Added: 3 years ago
From: DYEPAINTBALLVIDEO
Views: 27,082
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (119)

Sign In or Sign Up now to post a comment!
  • I still think that Dye should put oled board in theirs guns since they charge so much

  • im selling my airforce 09 pmr basically brand new,only had 2 cases through it

  • for how much ?

  • whats the difference with the 07 se to 09

  • Whats better a rail, a invert mini, or a g3

  • rail by far tht wht i am getting

  • rails better

  • rail

  • Whats the difference between the pmr and the slg?

  • very minimal things like reg barrell and trigger

  • slg is a shitty "sear-tripper" construction , it means that construction is pretty much like a tippmann... there is a sear holding bolt in place. that is not so good... PMR is waaaay better

  • reg, barrel, trigger, frame, feedneck, internals, board, nd bolt idk bout the asa but tht might be different 2 oh nd the price

  • he didnt mention that sear trippers will break o rings like hell, and that they leak a lot

    the slg is plastic, but the pmr is metal but it is not heavy

  • air hog have this and an ego 09 and this thing is such an air hog. its a decent gun for 450 but the etek 2 is worth the investment if you can afford 100 bucks more

  • you can shoot about 8 pods of paint through it with a 4500 psi and you really don tneed that much paint

  • yea but i have a 50ci 4500 ninja tank and i get bout 6 pods its an airhog no doubt

  • how much money are theese guns going for?

  • 450

  • around like $450-500 i think

  • in america it is $449.99 in canada it is $559.99

  • ur moms like my hand she bangs and slides

  • ooo rubber detents isn't dat good they rub and erode and eventualy you'll have to replace them oh and invert mini in my opinion isn't dat good for the price. it has a crappy barrel however the gun is small it isn't like most guns being that the board is where the regulator is . i dont like that the gun looks wierd on the regulator side which is actually the board . and i like seeing microlines theyre cool! board at front means damage not too much helpon technichal problems since its not regulr

  • wtf are u talking about

  • wow were can i get a camo proto rail

  • this or the invert mini????? and y????

  • the invert is next to retated and its super slow

  • Comment removed

  • PMR

  • I want this in airforce one or black :) too bad theres no airforce one 07

  • how longs the warrenty?

  • should i get a used dm6 or a 2009 pmr

  • pmr

  • 09 pmr more updated and cheaper

  • dm6 way better

  • dm6 for sure

  • Which is better, the 09 PMR or the Etek 2 considering the prices of both. I have the money for either of them but im not sure which one to get.

  • i think go for the 09 PMR

  • etek 2

  • easily the etek2

  • SLG is a very well desgined sear tripper. Really, the only noticable difference is kick+ sound, but thats solved with the 09 if that is a big deal to you.

  • Which one invert mini or pmr 09

  • Ive got the PMR and its a great marker with paints and reballs

  • Ive got the PMR and its a great marker with paints and reballs.

  • 09 PMR for sure

  • minis are shit

  • minis are just fine and are great for the price 09 PMRs are more expensive and i believe are decent guns

  • you shouldn't even have to ask - PMR!

  • slg needs less air and is more air efficient but overal pmr wins

  • slg 09 or pmr 09 ??

    wich one??

  • personally i think the slg is a better deal. i mean, they come with the same board. not much difference except for the barrels and feedneck. plus the pmr 09 is $150 more. slg definitely.

  • I still dont see why anybody would pay $300 dollars for a fucking sear tripper

  • whats that mean? i hear it all the time and im just kinda like yeahhhh....

  • PM me if you want me to explain in detail, but to put it simply, sear tripping is what mechanical guns use to fire, and mechanical guns are much lower on the technology scale than electros so people (like me) often criticize the slg for that. When the trigger is pulled on a sear tripper, the sear is tripped which often releases the hammer to strike the valve, to fire the gun. I dont know what happens in an slg when the sear is tripped but I would never pay $300 for a low tech gun like that

  • alright i got it. thanks dude

  • if you got the money for the pmr for shure the pmr

  • quick question im bout 2 get the ul slg 09 but ppl r like get the pmr so im like omg more research, any can help ty

  • in my opinion get the 09 PMR. its a lot better than the slg in many ways. the pmr has the dye ultrlight frame with ultralight roller bearing triiger, a beter clamping feedneck than the slg, it has a two piece 14 in. barrel honned to .690 versus the one piece 12 in. slg barrel.

    and then the internals of the gun are basicly a bit better than the slg. the pmr is 450$ and the slg is 200$

    hope this helps...

  • the 09 slg has the ul frame as well and is 300

  • 09 slg ftw!

  • whats better in this gun a 3000psi tank or a 4500psi tank

  • depends who you play

  • the psi just means how much air it holds so id go with the 4500psi

  • Is there a Difference between the Rail and the Matrix Rail?

  • who knows if they have wire eyes or ribbon eyes???

  • i think its awesome.. dont dig the red one though

  • hi the red 1 is ok lol i have it but it looks diffrent in the pics lol but is is aa good gun all round

  • thats what i thought, but im still stuck between getting the black one or the red one

  • its up to u m8 like i sed i have the red 1 but if i had the chance i would have gone 4 the black or airforce. but witch every 1 u get u wont go wrong.The red looks very diffrent in hand ;)

  • does the rail have rf

  • what do u mean rf...radio frequency?

  • ok anyone answer this. wich gun would be better. the 09 proto SLG or the 09 proto Rail. i am on a budget and the slg is $299.99 and the rail is $499.99. anyone answer this and give me ur honest opinion. forget the price just cmmt about the both protos. thx

  • I like the SLG better honestly. In fact, I think that even the old SLG is better than a PMR.

  • see i am deciding wether to get the 08 rail [$274.99] or the 09 SLG ul[$299.99] but idk. hav u had both of those protos b4?

  • get the 08 pmr. The SLG has plastic pieces in the bolt which sometimes break when you are shooting. The pmr has an all metal bolt.

  • ok thx but do u know if the 08 slg is any good? i am getting like an empire b hopper and a new tank and all that stuff but i am tryng to keep the price under $650 and i can with the 08 slg cause it comes with a mask for free. just give me ur opinion. 08 rail or 08 slg

  • get the 09 slg, its newer and im sure its alot better, come with ul and metal pieces, so yeh get it!!

  • bullshit

  • ha,

  • i think its obvious, get the 09 proto if you got the money, its a steal, and a really swwet gun.

  • niggercuntshit

  • TRUST ME, it can NOT get 1400 shots!!! HAHAH, no way, no absolute way i have a pmr 09 and IT CAN"T GET 1400 shots

  • so is the new pmr 09 going to be better than the pm8?

  • no, but maybe better that the pm6

  • Are you kidding, its between a pm7 and pm8, my pmr its better than this stock 09 pmr, its sick its like a dm8. But its got ul barrell, stock hyper 3, cp on/off, best asa's in the world. And lazer eyes, virtue, ect. ect... its amazing!@

  • its not between pm7 and pm8,pm7 has lpr but u probably dont know what that is, why do u think it was 300 more when it came out, a dm6 with ironmen tuning would blow the pmr out of the water much less a dm8, have u ever shot an dm8 with ironmen tuning there is no kick at all,dont get me wrong pmrs are good guns but they dont compare to even a pm7

  • Oh wow your funnY???? Dude, I've had egos before. Amazing lprs. The Proto When it first came out was 400 first off. So legitimately you've jepordized everything yoru gonna say in teh future, but I'll keep reading to amuse myself. I've tuned my pmr, first off its fully upp'd. Virtue, no plastic parts everything. Ul's everything. And I've tuned it perectly. Maybe its just me : /

  • i said the pm7 was 300 more than the pmr when it came out learn to read then insult and u cant compare an ego to a spoolie to different firing system, Really? can u not figure that out? u cant tune a rail besides raising the dwell higher and ur probly a kid that doesnt even play in a major tournament series, so yeah its just u :p

  • Oh wow arn't you a little funny guy. First of all I wasn't comparing a Poppett to a spoolie gun dumb ass. And yes I do play tournaments, I've Done several PTS's, XBall, and my team will probably be getting into skyline too. Are you unable to comprehend that in nowhere that I was comparing a ego to a dye matrix? NOOO, cause you don't care to read dumb ass. I was stating a fact but of couuurrse ya gotta think that everything in lifes a comparison. Heres a comparision

    paintball:

    me > you

  • well u said ego in a converstion about spoolies so yeah, but know your just saying random shit because u know im right, way to play in a tournament series people have actually heard of, u waste my time, so wateva

  • pm8's have an lpr too dumbass, they are internal

  • never said they didnt

  • Airforce color is sick

  • Its like a dm8 but heavier. wow.

  • The bolt looks exactly the same to me..

  • lighter

  • What kind of reg does the old rail have?

  • HYPER 2

  • Hyper 2 what are you talking about!?

  • Hyper 3

  • the OLD pmr has a hyper 2 reg.....

  • I know that........... dude, do you not get it,

    the guy said, hyper 2, oh wait that was you..

    and i said, "Hyper 2 what are you talking about"?! Meaning it was a hyper 3 not a hyper 2. And that guy was you and I got you confused with someone else.... lol yes forget it haha

  • okay explain then. cause looking at the design there pretty close. in the video they even said the new rail had its own type of fuse bolt. what separates it in performance from a pm8 bolt?

  • Navy Blue is the sweetest color...

  • whats the difference between a pmr bolt and the pm8's fuse bolt? cause other than that and the lpr the pm8 and pmr 09 are very similar lol.

  • the fuse bolt is much different than the rail bolt..

  • Its not a cheaper pm8.

  • now my rail se will never ssell =[

  • this might be the best gun out there for the price... but its only been out for like 2 weeks so im waiting to see some reviews

  • 4th

  • wondering if it will shoot anything like the pm8

  • i thought the exact same thing

    its a cheaper pm8

  • same thing as a pm8 just doesnt have a lpr. thats it

  • not really.

  • second

  • first

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more