i have the same adj spot 250 ... the problem with the lights.. it shows that there is blocking the lights in the middle.i just changed the bulb, .what are the parts do i have to fix ?... hope to hear from you thank you very much, ...
I saw a comment about the gobo wheel acting up on these lights. I am having the same problem with one that I have and was checking to see what your advice was to the other person that posted the question.
I stripped the casing off the base of my two DJ spot 250's and on the circuit board there are the spots for fan 1, fan 2, fan 3, a green box with four screws and then another green box with one screw. The green one with one screw is completely burned out. What is that and how do I fix it?! This happened to both of my spot 250's.
Ok I have a problem with my dj spot when I plug it in to all my lights at the club the led par cans flicker when I remove it from the dmx they stop It has something gone bad on the main board I need help.
i bought 4 of those, and made big mistake, cheap fans stuck and lamps melted everything inside. and you have to change ceramic sockets every couple months, coz they just burns out. lenses a shitty, beam angle too small. waste of money. overall.
hi i have 2 spot 250 units and im having a problem with 1 of my unit. Once i unplugged one of my unit n i plugged it back into power n the light would not turn back on. the motor runs n everything but no light. i have replaced the lamp n fuse still no light.. I have yet to open the panels to check shortage but want to knw if u can suggest me anything else before i do that?
i got 8 of them, and i love them... When you say the bulb is over heating does that mean .. it will stay on for 2 or 3 mins and then shut off.. but the head keeps running but the bulb turn off?? thanks for the video!
@Rushie36 hey dave its been awhile, i had to ask you have you had any problems with your gobo wheels loosing up (for example when you have your dmx controller on the same hobo shape, some how 2 of my 8 have the problem where there no on the same shape, i want to open it up and move them but , my real question is would i do damage at all to the wheel by doing that?) could a screw be loose maybe? )
i have the same adj spot 250 ... the problem with the lights.. it shows that there is blocking the lights in the middle.i just changed the bulb, .what are the parts do i have to fix ?... hope to hear from you thank you very much, ...
MrMyboytoy 15 hours ago
I saw a comment about the gobo wheel acting up on these lights. I am having the same problem with one that I have and was checking to see what your advice was to the other person that posted the question.
jcentertainmentDJ 4 months ago
These lights are a piece of crap 2 of the three are broke something on the boards worse light on the market not even 2 years old.Cheap poor design.
1CBRDUDE 9 months ago
I have a HUGE problem.
I stripped the casing off the base of my two DJ spot 250's and on the circuit board there are the spots for fan 1, fan 2, fan 3, a green box with four screws and then another green box with one screw. The green one with one screw is completely burned out. What is that and how do I fix it?! This happened to both of my spot 250's.
kurtharris21 1 year ago
Ok I have a problem with my dj spot when I plug it in to all my lights at the club the led par cans flicker when I remove it from the dmx they stop It has something gone bad on the main board I need help.
1CBRDUDE 1 year ago
i have a spot 300 it all works but no power to the light bulb that i can find
MegaStage1 1 year ago
i have power spot 250 and the fuse went out i put another and keeps popping them what do you think
jessokcool 2 years ago
i bought 4 of those, and made big mistake, cheap fans stuck and lamps melted everything inside. and you have to change ceramic sockets every couple months, coz they just burns out. lenses a shitty, beam angle too small. waste of money. overall.
dionizas 2 years ago
hi i have 2 spot 250 units and im having a problem with 1 of my unit. Once i unplugged one of my unit n i plugged it back into power n the light would not turn back on. the motor runs n everything but no light. i have replaced the lamp n fuse still no light.. I have yet to open the panels to check shortage but want to knw if u can suggest me anything else before i do that?
mruzzy1 2 years ago
Comment removed
watertower7 2 years ago
Comment removed
watertower7 2 years ago
i got 8 of them, and i love them... When you say the bulb is over heating does that mean .. it will stay on for 2 or 3 mins and then shut off.. but the head keeps running but the bulb turn off?? thanks for the video!
Tommy
TommyMidnight 2 years ago
Yes Tommy, thats exactly what happens, you normally find out that if this happens too often then ceramic holder ends up getting too big.
Dave
Rushie36 2 years ago
@Rushie36 hey dave its been awhile, i had to ask you have you had any problems with your gobo wheels loosing up (for example when you have your dmx controller on the same hobo shape, some how 2 of my 8 have the problem where there no on the same shape, i want to open it up and move them but , my real question is would i do damage at all to the wheel by doing that?) could a screw be loose maybe? )
Thanks Tommy
TommyMidnight 1 year ago