Hello, there is possibility of providing more detailed this project to my email, I hope to make a generator to put in my car and pass on to my friends.
I like this! I have some idea's as wel for you. We will talk later about putting your set up in my car. This and the computer entertainment system as well. Keep up the good work.
Great looking cell! Will you stick with acrylic end plates? I'm using white PVC. And are you using KOH? Is that the standard now? You said gaskets are 40mm? Is that right? THANKS!
29 plates 6x6 40 ml gaskets I put the tubes inside the holes +nnn-nnn+nnn-nnn+nnn-nnn+nnn- 7 cells Thanks!!! to Petedog and Smartscarecrow the cell works great. I am making a bigger and better cells.
I think when the generator has be running hot for a while the gaskets will compress a little making your bolts a little loose. I had to tight down mine every time I ran the cell for a while until the gaskets stopped compressing. I also recommend putting a cookie sheet under the cell so if it does leak over night it is caught by the pan. It happed to me and what a mess.
Just a reminder,after you run your cell for a while, remember to tighten the bolts on your cell. The gaskets will compress a little and the bolt will get loose. No need to make a mess because the bolts came loose and good job. I look forward to seeing cranking out the gas.
This has been flagged as spam show
Hello, there is possibility of providing more detailed this project to my email, I hope to make a generator to put in my car and pass on to my friends.
altairdesouza@gmail.com
altairdesouza 10 months ago
Excellent music! Good luck with your project.
OriginalUncleNemo 2 years ago
thats your first? WOW!! Nice job! I have yet to make one and am just starting to do some research. I like your style.
virginislandstv 2 years ago
hahahaha great video I love the music. Also a very nice Dry Cell !!!
insAneTunA 3 years ago
nice job man!
advancedhydrogen 3 years ago
I like this! I have some idea's as wel for you. We will talk later about putting your set up in my car. This and the computer entertainment system as well. Keep up the good work.
Dex699396 3 years ago
C'mon now, scott, 40mm is over an inch and a half! What do you really mean? .04 inches???
wslybe 3 years ago
Great looking cell! Will you stick with acrylic end plates? I'm using white PVC. And are you using KOH? Is that the standard now? You said gaskets are 40mm? Is that right? THANKS!
wslybe 3 years ago
I am using baking soda 40mm yes
ssfuturescott 3 years ago
nice unit. where did you get your supplies? i like the acrylic plates, it allow's you to see the gas being produced.
calmguy3 3 years ago
29 plates 6x6 40 ml gaskets I put the tubes inside the holes +nnn-nnn+nnn-nnn+nnn-nnn+nnn- 7 cells Thanks!!! to Petedog and Smartscarecrow the cell works great. I am making a bigger and better cells.
ssfuturescott 3 years ago
When watching your vid i almost felt down my chair! I've finished 1 like your last week!!!
I'm looking forward comparing numbers with u.
I have 21 plates 12X12 with 3 neutrals has 1st attemp.
Also, Pete is right about leakage, and acrylic tend to bend even at 3/4 inch tick when tightenign it.
Very nice work u did, looking forward on your numbers.
Eric
jujuanddup 3 years ago
I think when the generator has be running hot for a while the gaskets will compress a little making your bolts a little loose. I had to tight down mine every time I ran the cell for a while until the gaskets stopped compressing. I also recommend putting a cookie sheet under the cell so if it does leak over night it is caught by the pan. It happed to me and what a mess.
PeteDog444 3 years ago
Just a reminder,after you run your cell for a while, remember to tighten the bolts on your cell. The gaskets will compress a little and the bolt will get loose. No need to make a mess because the bolts came loose and good job. I look forward to seeing cranking out the gas.
PeteDog444 3 years ago
appears to be a very nicely crafted device ... do she put out ???
SmartScarecrow 3 years ago
watch for my next video to see her work. And to see my Excursion running on HHO.
ssfuturescott 3 years ago