@lp000028 ..I said that a few days ago...I got banned from posting comments...so I used a different name here.. Motors use power, even at 100% effiency..they don't have the ability to generate any more than it takesto run them. I've been around a loooong time...always guys making claims like this man...motors, magnets, coils......
@dougspair but have you made one? i have (imhotep), and im a qualified,experienced electrical engineer and ive never seen anything like this. you may have been around long,but that dont mean people dont make quantum leaps now and then.
@WrongBirthday It seems they are saying that, but I'm not believing it. You could charge the secondary battery, but the driver battery will run down quickly.
The primary battery runs the oscillator which creates a pulsed opposing charge which turns the rotor. As the rotor turns the other coils pick up a charge form the magnets passing by. I'm not certain as to whether or nor each coil drives the rotor. more information at r - charge dot com.
I am new to this and I have a question: does this require a battery to keep it running? I assume the answer is this. So inventor is saying that when this stuff is running, it produces more energy to charge batteries?
@TheoLogosDotNet as i understand it does use a battery but has so much efficiency that it puts out enough power to self support itself while giving energy to other devices.
i want to ask with you in this system all coils are triggering coils or some, if two or more triggering coils then other coils are in series or some parallel combination ????????.
i work at East Penn manufacturing. This would absolutely be useful at the company! Imagine how much more energy efficient things would be. Suggestion forms here i go.
autogenerate ? and if all is in electroaimant with an autogenerate alimentation. I have a system theorie with a cycle pipe with inside turbine/alternator / magnet free motor...the princip is that the boost pression in cycle close in the tube of air produce much energy very speed ....the arbi cylon system theorie
I'm not saying this isn't a really neat device but, Fails to mention, units of energy obtained, or constant max power output,
so we can minus 5 year maintenance cost, ( battery replacement ) from the gross free kilowatt hour obtained, and get the real free kilowatt hour obtained. No mention of pay back time, what is the pay back time? The serious question, "Can I put this in my electric car?" Should not be laughed at John, The answer is no, Not economically. Let the people know up front.
So if I understand this correctly If I used this device to "overcharge" 84 105 Amp hr 12 volt batteries (which could also be trash picked or purchased from scrap yards & revived) I would generate 24kw per day of power to run my adobe & perpetuate my daily needs. All for the nominal investment for 4k & about $2570 in batteries? Am I correct?
i do have a problem ..... NOWHERE , & I MEAN NOWHERE ,is there any information on their site as 2 how much voltage/amp's in correlation to input vs. output divulged .
Is it worth it?does bedini's unit's use( for example )1 volt d.c. & put out -1v.d.c. ?or does it put out 1.5v.a.c.?they offer absolutely no information in any of the offered unit's description's in regard's to any of the outcome of the unit's.and for the prices of the unit's , we the people like the tech stuff like spec's !
Google "energy from the vacuum torrent 1-18". You will find the answer in the first 6 videos. For your record this kind of technology doesn't use electrical currents. It uses DC pulses timed in a such fashion that the current in will not form itself. So, in short, the amperage will be 0 at the output of a radiant charger, but it will charge the batteries, which in turn can be used to power your needs. Why this works? Watch the videos!
@wildthing40486 The system is very flexible and can be run 12V to 150V input. Output depends on the size, voltage, and condition of the batteries and tuning. The battery is the negative resistor, so the bigger the better. This is not for the beginner. We show all the plans on how to make a small one with parts you can get locally. If you find it works for you then we offer these parts to go bigger. This is not about proving to anyone. You prove to yourself first before making such a commitment.
Thank you for making the kits available ... How much are they ??? Can I run an electric heater off it off the batteries bank 24- hours? ... How much maintenance does it need?? Running all winter in Alaska? ..
After thoroughly reviewing all ur sites and info my conclusion is ur energizers need better vibration control. They can't be used for long term and we need you to do more studies on longevity of parts. The thousands of dollars that is expected to be paid should come with a parts guarantee. What are the age times of Bearings and other moving parts of all ur high priced kits?
sorry, I know little to nothing about science, so could someone explain this to me simply? I'm guessing it's a some magnets that spin a metal disk in a circle at high speed, so does this thing move perpetually and make limitless energy? (It obviously wouldn't, otherwise everyone would have free energy forever by now, I just want to know why not)
@Paool3107 Hello, i designed and built a working model of this in 1982, but magnets at the time were problematic with eddy currents. This 10 coil unit has 20 magnets as an opposing force, Mr Bedini spent many years looking into the proper angles of deflection between North and South poles of magnets. Unfortunately, on his contracted ordering sites, all his Energizers are for experimental purposes only. So the thousands that you pay probably means less liability to him. Only use to charge.
The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
Nice video! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
@clbackus Most homes in the USA have AC, so there's no point in getting a large inverter for your apartment. Additionally, these Bedini Energizers do not provide the 100 amp current that your apartment needs. What he provides is charging electricity for rechargeable batteries and that is approximately 12 to 48 volts at less than 1 amps and no more than 5 amps. The Bedini Energizer can't power a house or apartment to the point of taking it off the main AC grid.
@1stsmosh Appreciate the response. That's good info. I hope somebody has the foresight to figure out a way to make a device that could take a house or apartment off the main AC grid, without using Solar or Wind.
@hhoforvolts That show was a classic example of of how to "debunk" without science; disinformation (knowingly or not). It was intentionally presented to associate cheesy, gimmicky sounds and graphics with the "falsity" of free energy in order to "seed" (un)truth into the minds of the masses. Now when people hear "free energy", they will immediately recall (most likely unconsciously) that show's "evidence". The mind cannot dissociate between TV and book information (fiction/fact) after long time.
all of you "law" guys realize that they are accepted "laws" as science currently understands them and are similar to when most thought the earth was flat and the sun orbited around the earth and the earth was the center of the universe. that used to be a law that naysayers such as yourself proclaimed as immutable . just saying
A consequence of the law of energy conservation is that perpetual motion machines can only work perpetually if they deliver no energy to their surroundings.
@judomagyar Playing it smart eh?! Then how can a windmill give out energy? How can a solar battery work and charge your home batteries. How can can a dam power up a whole city. All these devices use external energy like wind, sun or water that we do not have to pay for. Second law of thermodynamics applies only for closed systems. And as Bedini explicitly says his machines ARE NOT a closed system. Infact nothing in nature is.
20 years experience? That's less than 1 tenth of the time humans have been fooling around with electricity...How long did the principals of a wing help civilization tack sailboats into the wind before someone decided that a plane probably shouldn't need to flap like a bird? 50 years in a motor shop could not glean the answer to "how fast does electricity travel?" Which part? The field, or the transfer of electrons? The current flowing in a conductor which could kill you, moves 1 inch an hour.
To all of those assholes who don't know who John Bedini is, take notice that his patents and expertise are known throughout the world. Bedini amplifiers are considered by many to be the benchmark for signal clarity, and if you were looking for a finer audio instrument you would have to build it yourself.
@hhoforvolts Yeah, those two special effects dorks are hardly scientific when it comes to following a method to the letter. Quantum Mechanics over the last decade has pretty much flew in the face of Newtonian physics. It seemed like everybody was dismissing this as a perpetual motion scheme. A months worth of building a windmill yields decades of effortless grain milling or wood cutting...but the moment a guy snags ambient electrons in a collapsing field, overunity is a pipe dream?
The owner of the company I work for would give an arm and a leg for a working Bedini motor. If this works, why don't you make motors and sell them and become millionaires?
@judomagyar It doesn't get anything from nothing...it has an electron contributor which is unexplained. You know what else is unexplained? GRAVITY!!! Could you describe the characteristics of the massless force carrier which is the weakest of all the forces?! It's actually not a force at all, but rather an effect of equilibrium reacting to the immeasurable variances of density...short version: Gravitons,believed to be two spin bosons, are not. They reciprocate. Learn some more, parrot less.
@judomagyar I am not saying that. I am saying they could be harnessing some form of electromagnetic radiation in the gamma ray range or radio wave range. There are just so many possibilities within the realm of physics. THINK about it, and yes I did take physics classes.
I am surprised why no one at the center Bedini motor is not harvested in mind to use the negative energy, that is, the magnetism that would not change the bearing, which is a Bedini motor center? Thank you.
Ok I've had it. Will someone please tell me the point in running the coils with their own circuits. Wouldn't you just be using more energy to produce the same amount of energy? Why would anybody in their right mind take a step forward just to go right back to where they started? In another words let's say I was swinging someone at the power of 5. Ok, now lets say that you come along at the exact same power and you start helping me push that swing, you think that swing will swing any higher? NO!
True Free energy devices exist,But some very powerfull ppl don't want you and me to be free from energy costs,Find a motor that needs no fuel or input at LT-MAGNET-MOTORdotCOM ,Start the revolution!
Halo, I am in germany and i go thailand to see 1 person who say he make generator of 10gw. When i see generator i notice same as this and when i come back home to germany i start research. he copy everything and he say he is 1 man to make himself, but idea of bendini. when i meet to him he say he make for 6 years and always asking for 2million Euro to complete generator. many people give money and no finish and asking more .he scam many and live good life. company name ( NST thailand) freddie V
Why not use the "south" end of the coils as well? Put an outer hub that just covers the coils (like a smartdrive) and have "south" ended magnets on it . You would be better off lying the thing down so you could do away with the stand on one side. You already have the crcuit running the inside wheel. With the right spacings you could indeed double the out put. Maybe more!
Hell, I guess my bedini should be disassembled according to the high skrool back bench physics guru's! Considering it is charging a bank of batts right now....6 12v 40ah gells off of one 12v 7ah......I guess I'll have to tell the machine it can't do that....oh how do I break the news.................
@JoeFitant Wow! Like I said, back bench high skrool physics in action.......just build one exactly as mr. Bedini says, educate yourself, and you will shut your uneducated head up your ass mouth.......:-) Oh I forgot, they dont teach you to think in government education....just follow.........put on condoms and blame everyone else for your failure to fire a brain cell....
It is called Free Energy because the Oil company cannot get money. It is not so free because people sacrificed energy, money and time to investigate available energy outside of the oil company.
@NRen2k5 I UNDERSTAND BEDINI TECH AND ADAM AND JAMIE DO NOT!!! THEY ARE EITHER TOTAL IDIOTS OR TOTAL FRAUDS AND BOUGHT OUT BY BIG OIL
OR WHATEVER!!! THEIR "REPLICATION" IS JUNK AND CANNOT WORK!!! CHECK OUT THE FACTS OR DELETE YOUR U-TUBE ACCOUNT AND STFU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Correct me if my math is wrong but that battery pack is 1800 Amp-Hour. Multiplied by 12 Volts give a figure of over 2 KW. Now assuming the battery pack is being continually recharged by this 10 Coil unit, I guess you could run a small house on that!
I have built a single-coil version and I find that a magnetic reed switch can be used in place of the Trigger Coil. The only problem I had was that the cheap ferrite magnets became demagnetized after a few nights of running. So I replaced them with rare-earth magnets.
Hell yeh you said a mouthfull , the myth busters are dishonest with their viewers , i saw them change their story in the middle of the expierment with the pyramids . And obviously debunked it so the goverment would let them keep thier pothetic show. We are most certainly disappointed and disgraced by poeple that are so easily bought and sold myth busters are now in dishonor with us.
Mythdumbasses" will shock the hell out of themselves trying to hook it up!! ...Look , the media it is just about making a big buck in record time, not about changing the world without really expecting money out of it, Happy to see Mr's Bedini progressing in such a "shocking" way....Good luck to all
@metubegirl69er You can't just "collect energy from the back EMF" like that. Back EMF is a a voltage that varies with the mechanical load on the motor and affects the amount of current it draws. You can't just collect energy from it without losing it somewhere else.
So yes, I do know this, and it's why I call it a free energy device. Just because an "inventor" avoids using the word and his fans aren't smart enough to figure it out, doesn't mean his invention isn't a perpetual motion machine.
@metubegirl69er "sure you can collected back emf. how else do you think it works?"
That's circular logic. Like I said, it doesn't work because you CAN'T just collect back EMF like that. The less back EMF you have working against the input voltage, the more current (and therefore power) the whole thing will draw.
"if you think its a scam, then why are there so many working design,"
I don't think there are so many working designs, I think there are plenty of gullible people.
he is not the inventor,, , well it has he fucking name on it,, dip shit
for 1 ,, John Bedini , has many pattents,, that work,
he also has a design that cures cancer, for some people. look it up.
2nd h20 does not work?. the only thing that they proved is that they suck in following instructions,just because myth buster cant do it does not mean it cant be done, man u must have a small brain. go back and watch ur tv show, lol
@metubegirl69er "he is not the inventor... well it has he fucking name on it, dip shit"
What's that supposed to mean?
"Bedini has many patents that work"
Sure, but that doesn't mean they all work. For example he also has audio CD "clarifiers" which are like perpetual motion an impossibility.
"h20 does not work? the only thing that they proved is that they suck in following instructions,just because myth buster cant do it does not mean it cant be done"
@metubegirl69er They followed the plans they had. You want to go after somebody, go after the guy who gave them the apparently bad plans. Do you really believe that if they got it right they would have gotten free energy? Free energy is not possible in the real world!
yall want to compare Bedini to free energy crack pots
Bedini never says free energy at all. if you shut up, and open your ear, you might learn a gift to mankind on understand how thinks work in the real world..
@metubegirl69er Oh? It's not free energy? It's not more energy out than in? It's not supposed to charge a battery without using energy from somewhere else? Okay, so what is it exactly? Do tell!
@metubegirl69er does this suprise u???. that's their job,their still claiming we wen't to the moon in "1969" my small step for mankind,one giant hoax for nasa.
wow!! is this something like faraday's n machine?? very good work. i will try to build a small one .very exiting.regards to all of you' energy rebels' from greece.
Don't worry, because they will rather build their own "equivalent" version and show that it really does not work, which leads to their conclusion: BUSTED. That's the Mythbusters way.
Not too many people like to buy kits and build. That's a safety factor right there.
Inventors - get a very effective security system. Record everything. And if anything happens to you or your equipment its recorded and you and 10,000 other people have copies right away or in time lapse. Stealth.
overunity being impossible does not coincide with the fact our earth and all atoms, and well everything in the universe , is continuously moving and radiating.
the theory has some serious flaws. I'd rethink that if THAT is what is making you skeptical.
rickfriedrick says this is "rather inexpensive for the work involved" INEXPENSIVE?? Right out of his own mouth, it is inexpensive, but he is charging $4200??? Can he say GREED??? newranger2, is right, TOO expensive!! Rick, greedy people suck!
This is not for a school science project. It is rather inexpensive for the work involved in building it. Just ask someone what they would charge to CNC that machine.
Wow! Free unlimited energy. This is so exciting. I'm so glad that finally science has solved all of the worlds problems and we can cure the needs of all society everywhere in the world simply with a kit we can order over the internet. I knew that one day, a few unknown amateurs would be able to save the planet.
And the kit comes complete with schematic diagram, that's so nice!
Now wait....How can this be unlimied energy active 24 hours a day and yet not be overunity? If this charges a battery & gains energy, its overunity. If this thing actually worked why would they see a kit & not produce these as energy devices? Why not make a relay switch on the input & output batteries. When the output is charged swap batteries. The thing should run forever while powering some sort of load like a small light bulb. Right??
SIR , what should i do if i want to buy this kit ............... any contact number or email add .... i am from india ..
MsJAYDEEP1993 1 week ago
Tell me please what will be happen when magnets lose their power?
All magnets has it's lifetime. Can you tell me lifetime of magnets you use?
Is it profitable in sense of magnets lifetime/magnet cost per energy produced?
WhaleSerg 2 weeks ago
where can I post a message that might actually get read by these two?
thanks in advance!
cjl85uk 3 weeks ago
sudo science
lp000028 3 weeks ago in playlist Magnetic Motors
@lp000028 sudo apt-get nope.avi
kromeclutch 3 weeks ago
you invented a electric motor congrats.
lp000028 3 weeks ago in playlist Magnetic Motors
@lp000028 ..I said that a few days ago...I got banned from posting comments...so I used a different name here.. Motors use power, even at 100% effiency..they don't have the ability to generate any more than it takesto run them. I've been around a loooong time...always guys making claims like this man...motors, magnets, coils......
dougspair 2 weeks ago
@dougspair but have you made one? i have (imhotep), and im a qualified,experienced electrical engineer and ive never seen anything like this. you may have been around long,but that dont mean people dont make quantum leaps now and then.
sixstringmat 1 day ago
hello
good years :)
Where is the link internet for buy a bedini kit ?
jeanalexandre23 3 weeks ago
Electric car + Bedini + Solar panel (redundant power source) = 1000+ Mile electric car :)
TheMorgothBauglir 4 weeks ago
1:55 Is that a water hammer? :o
TheMorgothBauglir 4 weeks ago
the magnets look so black...are they really neo dyms?
WrongBirthday 1 month ago
Cool!
ufoengines 1 month ago
Use this as a charging station for a robot, and we are set!
IcarusFlying 2 months ago
so in a few word this system means:..... recharging batteries for ever without outlet power, correct?
WrongBirthday 2 months ago 2
@WrongBirthday It seems they are saying that, but I'm not believing it. You could charge the secondary battery, but the driver battery will run down quickly.
dougspair 2 weeks ago
The primary battery runs the oscillator which creates a pulsed opposing charge which turns the rotor. As the rotor turns the other coils pick up a charge form the magnets passing by. I'm not certain as to whether or nor each coil drives the rotor. more information at r - charge dot com.
CGaquamarine3 2 months ago
i heard his shop got raided by the fed gov and they confiscated all his technology. it would destroy the power companies.
altezzadrifter07 2 months ago
@altezzadrifter07 1) you heard that from where? 2) and when was it supposed to have happened? 3) and from whom did you hear that?
surely not in the past 5-6 years.
youarelackluster 1 month ago
I am new to this and I have a question: does this require a battery to keep it running? I assume the answer is this. So inventor is saying that when this stuff is running, it produces more energy to charge batteries?
TheoLogosDotNet 3 months ago
@TheoLogosDotNet as i understand it does use a battery but has so much efficiency that it puts out enough power to self support itself while giving energy to other devices.
altezzadrifter07 2 months ago
Hello Dear BEDINI Sir,
i want to ask with you in this system all coils are triggering coils or some, if two or more triggering coils then other coils are in series or some parallel combination ????????.
Thankx
bhaikhurram1 3 months ago 3
how much is it, were can i get it
WRH052970 3 months ago
wow your amazing sir bedini how much that 10 coil machine ????
panyolito1929 4 months ago
i work at East Penn manufacturing. This would absolutely be useful at the company! Imagine how much more energy efficient things would be. Suggestion forms here i go.
victorisda69king 4 months ago
autogenerate ? and if all is in electroaimant with an autogenerate alimentation. I have a system theorie with a cycle pipe with inside turbine/alternator / magnet free motor...the princip is that the boost pression in cycle close in the tube of air produce much energy very speed ....the arbi cylon system theorie
shieldcrystalblue 4 months ago
I'm not saying this isn't a really neat device but, Fails to mention, units of energy obtained, or constant max power output,
so we can minus 5 year maintenance cost, ( battery replacement ) from the gross free kilowatt hour obtained, and get the real free kilowatt hour obtained. No mention of pay back time, what is the pay back time? The serious question, "Can I put this in my electric car?" Should not be laughed at John, The answer is no, Not economically. Let the people know up front.
kewbreeze4 4 months ago
Man i am so excited this is best thing that can happen in 2011.. we can have this running at home..
pathania 5 months ago
@pathania yes
rickfriedrich 5 months ago
Where can we buy this kit? Thanks
rikoder 5 months ago
@rikoder On our website:
r-charge.com/10-Pole-Monopole-Kit.html
rickfriedrich 5 months ago
Congratulation!! Very nice. Felicitaciones Buen Proyecto
electrik77 5 months ago
This has been flagged as spam show
can you please tell me what is the price for this kit ... my e.mail is : ahmad_saadoon@yahoo.com
ahmadsaadoonhussein 5 months ago
These losers don't leave their phone numbers. Hello, i want 10 complete systems email me or call me at call me at 203-681-1240 . I am a contractor.
comoloco247 5 months ago
So if I understand this correctly If I used this device to "overcharge" 84 105 Amp hr 12 volt batteries (which could also be trash picked or purchased from scrap yards & revived) I would generate 24kw per day of power to run my adobe & perpetuate my daily needs. All for the nominal investment for 4k & about $2570 in batteries? Am I correct?
Begbucks 6 months ago
i do have a problem ..... NOWHERE , & I MEAN NOWHERE ,is there any information on their site as 2 how much voltage/amp's in correlation to input vs. output divulged .
Is it worth it?does bedini's unit's use( for example )1 volt d.c. & put out -1v.d.c. ?or does it put out 1.5v.a.c.?they offer absolutely no information in any of the offered unit's description's in regard's to any of the outcome of the unit's.and for the prices of the unit's , we the people like the tech stuff like spec's !
wildthing40486 7 months ago
@wildthing40486
Google "energy from the vacuum torrent 1-18". You will find the answer in the first 6 videos. For your record this kind of technology doesn't use electrical currents. It uses DC pulses timed in a such fashion that the current in will not form itself. So, in short, the amperage will be 0 at the output of a radiant charger, but it will charge the batteries, which in turn can be used to power your needs. Why this works? Watch the videos!
johnspecker 7 months ago
@wildthing40486 The system is very flexible and can be run 12V to 150V input. Output depends on the size, voltage, and condition of the batteries and tuning. The battery is the negative resistor, so the bigger the better. This is not for the beginner. We show all the plans on how to make a small one with parts you can get locally. If you find it works for you then we offer these parts to go bigger. This is not about proving to anyone. You prove to yourself first before making such a commitment.
rickfriedrich 5 months ago
r-charge.com/Motor-Generator-Kits_c_8-1-2.html
wildthing40486 7 months ago
THIS TECHNOLOGY NEEDS to be embraced. Period.
thefeet 8 months ago
I love how you yanks always have awesome looking machine shops to make this stuff, i am jealous.
weetiewildrose 8 months ago
does the wheels by multiply'ing it, double up the amount of energy?
Mapiemma 8 months ago
@Mapiemma can you please tell me what is the price for this kit
micallefbiofuel 6 months ago
Comment removed
TWMusicBerlin 5 months ago
Respond to this video... Very interested
micallefbiofuel 6 months ago
Jees people... This is complete BS...
Arwiiss 8 months ago
Thank you for making the kits available ... How much are they ??? Can I run an electric heater off it off the batteries bank 24- hours? ... How much maintenance does it need?? Running all winter in Alaska? ..
Pauldaystar 9 months ago
Which max power output is possible ?
Special requirements to the batteries?
How many coils are included in this kit?
Build manual and User manual?
How fast batteries can be charged?
How many cycles are need to be done to charge battery to full optimal capacity?
Where i can find full technical description of 10 pole monopole kit?
BEDINSSGUKRAINE 9 months ago
@BEDINSSGUKRAINE
r-charge.com/Motor-Generator-Kits_c_8-1-2.html
wildthing40486 7 months ago
It works on the old principle, "when you pass a magnet over the length of a copper wire, a measureable amount of electric current outputs".
The main problem with the Bedini Energizer is "lack of amps". It does not generate enough amperage to power a house or apartment.
1stsmosh 9 months ago
After thoroughly reviewing all ur sites and info my conclusion is ur energizers need better vibration control. They can't be used for long term and we need you to do more studies on longevity of parts. The thousands of dollars that is expected to be paid should come with a parts guarantee. What are the age times of Bearings and other moving parts of all ur high priced kits?
1stsmosh 9 months ago
sorry, I know little to nothing about science, so could someone explain this to me simply? I'm guessing it's a some magnets that spin a metal disk in a circle at high speed, so does this thing move perpetually and make limitless energy? (It obviously wouldn't, otherwise everyone would have free energy forever by now, I just want to know why not)
Paool3107 9 months ago
@Paool3107 Hello, i designed and built a working model of this in 1982, but magnets at the time were problematic with eddy currents. This 10 coil unit has 20 magnets as an opposing force, Mr Bedini spent many years looking into the proper angles of deflection between North and South poles of magnets. Unfortunately, on his contracted ordering sites, all his Energizers are for experimental purposes only. So the thousands that you pay probably means less liability to him. Only use to charge.
1stsmosh 9 months ago
The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
333kgb 9 months ago
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
333kgb 9 months ago
Nice video! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
333kgb 9 months ago
Has anyone hooked this to a DC/AC Inverter and tried to power a circuit for a small apartment?
clbackus 9 months ago
@clbackus Most homes in the USA have AC, so there's no point in getting a large inverter for your apartment. Additionally, these Bedini Energizers do not provide the 100 amp current that your apartment needs. What he provides is charging electricity for rechargeable batteries and that is approximately 12 to 48 volts at less than 1 amps and no more than 5 amps. The Bedini Energizer can't power a house or apartment to the point of taking it off the main AC grid.
1stsmosh 9 months ago
@1stsmosh Appreciate the response. That's good info. I hope somebody has the foresight to figure out a way to make a device that could take a house or apartment off the main AC grid, without using Solar or Wind.
clbackus 9 months ago
Why would you need a fan as part of the "system" to charge the batteries?????
borgteam 10 months ago
@hhoforvolts That show was a classic example of of how to "debunk" without science; disinformation (knowingly or not). It was intentionally presented to associate cheesy, gimmicky sounds and graphics with the "falsity" of free energy in order to "seed" (un)truth into the minds of the masses. Now when people hear "free energy", they will immediately recall (most likely unconsciously) that show's "evidence". The mind cannot dissociate between TV and book information (fiction/fact) after long time.
energ8t 10 months ago
@energ8t FYI, I am referring to the Mythbusters smear show.
energ8t 10 months ago
@energ8t That true, once a lie is told by people who other people trust, the lie always take front position.....AKA our current president.
Richard
hhoforvolts 10 months ago
all of you "law" guys realize that they are accepted "laws" as science currently understands them and are similar to when most thought the earth was flat and the sun orbited around the earth and the earth was the center of the universe. that used to be a law that naysayers such as yourself proclaimed as immutable . just saying
cooldaddyy 10 months ago
Wicked Science!!!
RagingBubuli 10 months ago
cool thing..but ist true 1800A per Hour???
obbamadeception 10 months ago
i saw a video a guy was saying that john bedini motor does not work as john say it does wacth this video
alienhddna 10 months ago
This has been flagged as spam show
watch my video
Ali2011mb 10 months ago
Initial reaction : There is no such thing as "perpetual motion"-reason second law of thermodynamics.
F4foxbravo995 11 months ago
A consequence of the law of energy conservation is that perpetual motion machines can only work perpetually if they deliver no energy to their surroundings.
judomagyar 11 months ago
@judomagyar Playing it smart eh?! Then how can a windmill give out energy? How can a solar battery work and charge your home batteries. How can can a dam power up a whole city. All these devices use external energy like wind, sun or water that we do not have to pay for. Second law of thermodynamics applies only for closed systems. And as Bedini explicitly says his machines ARE NOT a closed system. Infact nothing in nature is.
skytreker 10 months ago
20 years experience? That's less than 1 tenth of the time humans have been fooling around with electricity...How long did the principals of a wing help civilization tack sailboats into the wind before someone decided that a plane probably shouldn't need to flap like a bird? 50 years in a motor shop could not glean the answer to "how fast does electricity travel?" Which part? The field, or the transfer of electrons? The current flowing in a conductor which could kill you, moves 1 inch an hour.
fjoefourty 11 months ago
To all of those assholes who don't know who John Bedini is, take notice that his patents and expertise are known throughout the world. Bedini amplifiers are considered by many to be the benchmark for signal clarity, and if you were looking for a finer audio instrument you would have to build it yourself.
fjoefourty 11 months ago
@hhoforvolts Yeah, those two special effects dorks are hardly scientific when it comes to following a method to the letter. Quantum Mechanics over the last decade has pretty much flew in the face of Newtonian physics. It seemed like everybody was dismissing this as a perpetual motion scheme. A months worth of building a windmill yields decades of effortless grain milling or wood cutting...but the moment a guy snags ambient electrons in a collapsing field, overunity is a pipe dream?
fjoefourty 11 months ago
Comment removed
fjoefourty 11 months ago
@AJCRADDOCK
I have worked with electric motors for 20 years.
The owner of the company I work for would give an arm and a leg for a working Bedini motor. If this works, why don't you make motors and sell them and become millionaires?
judomagyar 1 year ago
@judomagyar They are trying. I know scientists that have had their labs burnt down for this. He will be bought out or killed eventually.
WhoisJacqueFresco 11 months ago
@WhoisJacqueFresco
You can't get something from nothing!
Take a physics class!
judomagyar 11 months ago
@judomagyar It doesn't get anything from nothing...it has an electron contributor which is unexplained. You know what else is unexplained? GRAVITY!!! Could you describe the characteristics of the massless force carrier which is the weakest of all the forces?! It's actually not a force at all, but rather an effect of equilibrium reacting to the immeasurable variances of density...short version: Gravitons,believed to be two spin bosons, are not. They reciprocate. Learn some more, parrot less.
fjoefourty 11 months ago
@judomagyar I am not saying that. I am saying they could be harnessing some form of electromagnetic radiation in the gamma ray range or radio wave range. There are just so many possibilities within the realm of physics. THINK about it, and yes I did take physics classes.
WhoisJacqueFresco 10 months ago
Kewl..
HauntingsTelevision 1 year ago
Wopeeee.. nice project. This one looks buildable with common supplies around our place.
09205479428 1 year ago
Yes ...... but I want to buy one!!!! HOW!!!
LittleJoeofKeperra 1 year ago
@LittleJoeofKeperra the link to the website (potentialtec[dot]com) is at the end of the video, that's where you can buy the kits ;)
siamsurf 1 year ago
This guy is FAAABULOUUUSS!!!!!
iroc464 1 year ago
This has been flagged as spam show
Good bye man I am your naughty girl mworld5.info
TabethaMackenzi 1 year ago
I am surprised why no one at the center Bedini motor is not harvested in mind to use the negative energy, that is, the magnetism that would not change the bearing, which is a Bedini motor center? Thank you.
yeremy838 1 year ago
How can I buy one?
marls10191 1 year ago
Ok I've had it. Will someone please tell me the point in running the coils with their own circuits. Wouldn't you just be using more energy to produce the same amount of energy? Why would anybody in their right mind take a step forward just to go right back to where they started? In another words let's say I was swinging someone at the power of 5. Ok, now lets say that you come along at the exact same power and you start helping me push that swing, you think that swing will swing any higher? NO!
debunkified 1 year ago
This has been flagged as spam show
True Free energy devices exist,But some very powerfull ppl don't want you and me to be free from energy costs,Find a motor that needs no fuel or input at LT-MAGNET-MOTORdotCOM ,Start the revolution!
porscheghcje 1 year ago
ennas eli te9ra ya zebbi
Omar2788 1 year ago
This has been flagged as spam show
Free Energy is real but the coverup is strong, if you are interested in a REAL free energy machine then
just search for the LT MAGNET MOTOR in the youtube video search , it is probably the ONLY working magnet
motor out there. Join the free energy revolution!!
buchananfibbing 1 year ago
Halo, I am in germany and i go thailand to see 1 person who say he make generator of 10gw. When i see generator i notice same as this and when i come back home to germany i start research. he copy everything and he say he is 1 man to make himself, but idea of bendini. when i meet to him he say he make for 6 years and always asking for 2million Euro to complete generator. many people give money and no finish and asking more .he scam many and live good life. company name ( NST thailand) freddie V
raidiantenergy101 1 year ago
Comment removed
peterwilson69 1 year ago
Why not use the "south" end of the coils as well? Put an outer hub that just covers the coils (like a smartdrive) and have "south" ended magnets on it . You would be better off lying the thing down so you could do away with the stand on one side. You already have the crcuit running the inside wheel. With the right spacings you could indeed double the out put. Maybe more!
unclewooly 1 year ago
@unclewooly I agree with UncleWooly. There is room for improvement here as well as force strenth of the pushing magnets.
HOw much for the unit?
Does it come preassembled to?
thegermanprostitute 1 year ago
Hell, I guess my bedini should be disassembled according to the high skrool back bench physics guru's! Considering it is charging a bank of batts right now....6 12v 40ah gells off of one 12v 7ah......I guess I'll have to tell the machine it can't do that....oh how do I break the news.................
ccandb 1 year ago
@ccandb The video called them 1800 amperehours!!! LOL.. Shows these quacks don't know what they are talking about.
JoeFitant 1 year ago
@JoeFitant Wow! Like I said, back bench high skrool physics in action.......just build one exactly as mr. Bedini says, educate yourself, and you will shut your uneducated head up your ass mouth.......:-) Oh I forgot, they dont teach you to think in government education....just follow.........put on condoms and blame everyone else for your failure to fire a brain cell....
ccandb 1 year ago
Web site please?
Topazman12 1 year ago
It is called Free Energy because the Oil company cannot get money. It is not so free because people sacrificed energy, money and time to investigate available energy outside of the oil company.
Topazman12 1 year ago
@Topazman12 Sounds like a complete repeat of the oil companies costs. What a surprise! R&D costs money!
JoeFitant 1 year ago
@TheDemethar now wait a damn minute!!!. does mean my oil stocks in BP are worthless???.
myleftnutts 1 year ago
@myleftnutts No it needs lubrication.
SidneyBou 1 year ago
john bedini have more than 20 years study this effect ( by the way mr Tesla discover this effect).
migu9999 1 year ago
@NRen2k5 I UNDERSTAND BEDINI TECH AND ADAM AND JAMIE DO NOT!!! THEY ARE EITHER TOTAL IDIOTS OR TOTAL FRAUDS AND BOUGHT OUT BY BIG OIL
OR WHATEVER!!! THEIR "REPLICATION" IS JUNK AND CANNOT WORK!!! CHECK OUT THE FACTS OR DELETE YOUR U-TUBE ACCOUNT AND STFU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Over and OUT!
electrician725 1 year ago
Correct me if my math is wrong but that battery pack is 1800 Amp-Hour. Multiplied by 12 Volts give a figure of over 2 KW. Now assuming the battery pack is being continually recharged by this 10 Coil unit, I guess you could run a small house on that!
jsiuksta 1 year ago
I have built a single-coil version and I find that a magnetic reed switch can be used in place of the Trigger Coil. The only problem I had was that the cheap ferrite magnets became demagnetized after a few nights of running. So I replaced them with rare-earth magnets.
jsiuksta 1 year ago
nice ensemble, but if it were real: why do not replace the battery by another identical generator is in operation previously? ha-ha
anemac9 1 year ago
How can i purchas this unit?
abeliscain 1 year ago
Has anybody bought this kit?
Does it really works? Do you get free energy?
Shamanixland 1 year ago
@Shamanixland i built many all work as they advertised to
zz
guyzzemf 1 year ago
The most beautiful sight of the year! :D
trance183 1 year ago
Comment removed
SyTyger 1 year ago
Hell yeh you said a mouthfull , the myth busters are dishonest with their viewers , i saw them change their story in the middle of the expierment with the pyramids . And obviously debunked it so the goverment would let them keep thier pothetic show. We are most certainly disappointed and disgraced by poeple that are so easily bought and sold myth busters are now in dishonor with us.
noitavlas777 1 year ago
So this truly works? Mythbusters tried to debunk it but got caught with their pants down?
Oh my.. gotta look into this! AWESOME!
WB2RM 1 year ago
Mythdumbasses" will shock the hell out of themselves trying to hook it up!! ...Look , the media it is just about making a big buck in record time, not about changing the world without really expecting money out of it, Happy to see Mr's Bedini progressing in such a "shocking" way....Good luck to all
kukulcangod1 1 year ago
This has been flagged as spam show
@NRen2k5 sorry i meant to give u thumbs down..lol
understanding how electricity work is still a theory,
over a 100 years motor are wired wrong.
they are inefficient. they get hot and energy is lost.
some text books are wrong and needs to be update..
so are you saying that's there nothing more to invent?
and this is real science because the results can be duplicated on any scale
Thanks for all your smart ass comments I never laughed so hard, keep 'em coming!
LMFAO
metubegirl69er 1 year ago
@metubegirl69er You can't just "collect energy from the back EMF" like that. Back EMF is a a voltage that varies with the mechanical load on the motor and affects the amount of current it draws. You can't just collect energy from it without losing it somewhere else.
So yes, I do know this, and it's why I call it a free energy device. Just because an "inventor" avoids using the word and his fans aren't smart enough to figure it out, doesn't mean his invention isn't a perpetual motion machine.
NRen2k5 1 year ago
@NRen2k5
sure you can collected back emf. how else do you think it works? if you think its a scam, then why are there so many working design,
why didn't myth busters talk with bedini ,, its not like he is dead.
they could have easily talked with him to understand the design.
look how myth busters did the h20 cell
, these guys make a crappy machine and they expect it to work and when it doesn't, they discredit. now that's not fair, is it?
discredit when you don't even have a working design
metubegirl69er 1 year ago
This has been flagged as spam show
@metubegirl69er "sure you can collected back emf. how else do you think it works?"
That's circular logic. Like I said, it doesn't work because you CAN'T just collect back EMF like that. The less back EMF you have working against the input voltage, the more current (and therefore power) the whole thing will draw.
"if you think its a scam, then why are there so many working design,"
I don't think there are so many working designs, I think there are plenty of gullible people.
(continued)
NRen2k5 1 year ago
@metubegirl69er (continued) "why didn't myth busters talk with bedini ,, its not like he is dead."
Well for starters, there's the obvious bias from him being the actual inventor. Kind of like having a diehard Ford fan compare cars....
"look how myth busters did the h20 cell
, these guys make a crappy machine and they expect it to work and when it doesn't, they discredit.
now that's not fair, is it?"
You only say that after they proved it didn't work....
(continued)
NRen2k5 1 year ago
@NRen2k5
metubegirl69er 1 year ago
@NRen2k5
he is not the inventor,, , well it has he fucking name on it,, dip shit
for 1 ,, John Bedini , has many pattents,, that work,
he also has a design that cures cancer, for some people. look it up.
2nd h20 does not work?. the only thing that they proved is that they suck in following instructions,just because myth buster cant do it does not mean it cant be done, man u must have a small brain. go back and watch ur tv show, lol
metubegirl69er 1 year ago
This has been flagged as spam show
@metubegirl69er "he is not the inventor... well it has he fucking name on it, dip shit"
What's that supposed to mean?
"Bedini has many patents that work"
Sure, but that doesn't mean they all work. For example he also has audio CD "clarifiers" which are like perpetual motion an impossibility.
"h20 does not work? the only thing that they proved is that they suck in following instructions,just because myth buster cant do it does not mean it cant be done"
It doesn't mean it CAN be done, either.
NRen2k5 1 year ago
@metubegirl69er (continued) "discredit when you don't even have a working design"
Maybe free energy nuts should spend less time making hopeless failures of designs and do something productive with their time....
NRen2k5 1 year ago
@NRen2k5
your talking out of you ass,, because they did not follow the plans,,
the coil windings were wrong. there where no magnet,,
how the hell are the coils going to collected energy...
MIT my ass.. that's was a crud design,, that a H.S kid can do better then a MIT
lololol
you the idiot.. do some research before you start trolling.
listen to myth busters and you be thinking inside the box
and your fake and gay.
metubegirl69er 1 year ago
@metubegirl69er They followed the plans they had. You want to go after somebody, go after the guy who gave them the apparently bad plans. Do you really believe that if they got it right they would have gotten free energy? Free energy is not possible in the real world!
Trolling? Wow, speak for yourself.
NRen2k5 1 year ago
@NRen2k5
who the hell said anything about free energy,?
who's says free energy, oh, you and myth busters
yall want to compare Bedini to free energy crack pots
Bedini never says free energy at all. if you shut up, and open your ear, you might learn a gift to mankind on understand how thinks work in the real world..
metubegirl69er 1 year ago
@metubegirl69er Oh? It's not free energy? It's not more energy out than in? It's not supposed to charge a battery without using energy from somewhere else? Okay, so what is it exactly? Do tell!
NRen2k5 1 year ago
Comment removed
metubegirl69er 1 year ago
@NRen2k5
if your going to talk like a douchebag.. please explain your self because i don't speak that language.
metubegirl69er 1 year ago
Do the coils come pre-wound?
TheNuclearWatermelon 1 year ago
@TheNuclearWatermelon
yes, they are pre-wound
metubegirl69er 1 year ago
the myth busters... are.. BUSTED!!
valllhalla 1 year ago
@valllhalla Not as busted as the free energy fruitcakes....
NRen2k5 1 year ago
@NRen2k5 Why so hostile man?... what good comes out being so hostile? This is the future learn it, you got to wanna know this technology.
valllhalla 1 year ago
how long it takes to fully charge the batteries of 1800amp!!
Any way we need to know a lot more !!!
whare is the conference report!!
MALEXIOU1 1 year ago
Is it possible to heat my home with your system
prockm9 1 year ago
myth buster suck,, for discrediting and for not apologizing to Bedini
metubegirl69er 1 year ago 46
@metubegirl69er does this suprise u???. that's their job,their still claiming we wen't to the moon in "1969" my small step for mankind,one giant hoax for nasa.
myleftnutts 1 year ago
@metubegirl69er totally. we wont forget that one. they STILL Need to apologize, i think.
camelsonhorizon 1 year ago
WELL coments 1 WHY not to buitd one,generate electricity in format 120/220 60 hz,
just plug it and give back the elec to net such like wind mill?
ANTONINZIVALA 1 year ago 2
Does anyone know how much actual torque this 10coil motor/ "Energizer" produces (in ft/lbs or in/lbs)
vid009 1 year ago
wow!! is this something like faraday's n machine?? very good work. i will try to build a small one .very exiting.regards to all of you' energy rebels' from greece.
gsirras 1 year ago
How much watts does that produce? And how expensive is it? :)
righer12 1 year ago
Hi John and Rick. Congrats! A beautifull piece of engineering! Very usefull in combination with old deep cells, like Benjamin proposed.
Keep it up!!
cosmicworldbridger 1 year ago
Don't worry, because they will rather build their own "equivalent" version and show that it really does not work, which leads to their conclusion: BUSTED. That's the Mythbusters way.
Fuligula 1 year ago
KICK ASS!!!
waterforfuel 1 year ago
Comment removed
Descayrac 1 year ago
Not too many people like to buy kits and build. That's a safety factor right there.
Inventors - get a very effective security system. Record everything. And if anything happens to you or your equipment its recorded and you and 10,000 other people have copies right away or in time lapse. Stealth.
waltermouthoh 1 year ago
hi nice device just a couple questions tho,
what gauge wire did you use on your coils?
how many windings?
whats the RPM on ur unit?
what did you use for the core on ur coils?
how far are your magnets away from the coils?
how are the magnets poles oriented? and what the distance between each magnet?
thnx
kr0nzze 1 year ago
Can this be used to put power back into the grid? If so, how long to break even on your $4200?
How long before the moving parts wear out?
knowbeforeyoubuy 1 year ago
"This is an experimental kit for your own experimentation..."
chriscrozzz 1 year ago
earth shaking ..lol
overunity being impossible does not coincide with the fact our earth and all atoms, and well everything in the universe , is continuously moving and radiating.
the theory has some serious flaws. I'd rethink that if THAT is what is making you skeptical.
mikeperron8411 1 year ago
It is not overunity if you account for the energy which comes from another source, then you are in unity like all real systems.
As for the rest you can search on your own if you feel interested, the info is out there...
Nabo00o 1 year ago
So this is a fly wheel. Not that it isnt a wonderful and helpful technology, but it is just a fancy looking flywheel.
MaBuSt 1 year ago
URLs at end of vid.
badstacksize 1 year ago
This is it! Thank you so much.
jesonl 1 year ago
This has been flagged as spam show
rickfriedrick says this is "rather inexpensive for the work involved" INEXPENSIVE?? Right out of his own mouth, it is inexpensive, but he is charging $4200??? Can he say GREED??? newranger2, is right, TOO expensive!! Rick, greedy people suck!
colbyhotstud 1 year ago
This is not for a school science project. It is rather inexpensive for the work involved in building it. Just ask someone what they would charge to CNC that machine.
rickfriedrich 1 year ago
Amazing like always, as I have a Suzuki Samurai would like to know more how he converted his 4x4...?
thevoice4you 1 year ago
This is just fantastic!!! Thankyou for sharing.What a wonderful invention and what a clever guy!! The world needs more people like you my friend.
Namaste, to free energy!!!!
<3
freedancer42 1 year ago
sorry i have no clue on this kind of thing - so basic question --- is this thing able to generate enough electricity to keep a house running??
batdancer 1 year ago
Wow! Free unlimited energy. This is so exciting. I'm so glad that finally science has solved all of the worlds problems and we can cure the needs of all society everywhere in the world simply with a kit we can order over the internet. I knew that one day, a few unknown amateurs would be able to save the planet.
And the kit comes complete with schematic diagram, that's so nice!
BarryLiberty 1 year ago
Look at the physics and dont be so ignorant.
megawatts1066 1 year ago
@megawatts1066
I have been looking at the physics and it is interesting!
This is not overunity in total sense like perpetual motion, you will rarely hear seriously interested people say that.
But, it might be free energy in the sense that you have made available a source of unlimited energy, which is green and is active 24 hours a day.
Nabo00o 1 year ago
Now wait....How can this be unlimied energy active 24 hours a day and yet not be overunity? If this charges a battery & gains energy, its overunity. If this thing actually worked why would they see a kit & not produce these as energy devices? Why not make a relay switch on the input & output batteries. When the output is charged swap batteries. The thing should run forever while powering some sort of load like a small light bulb. Right??
Texmurphy51 1 year ago
Nice work guys. Looks very well made.
Welesly77 1 year ago
looks like a normal asynchronous motor with short circuit rotor
goodi2k7 1 year ago
beautiful!! thank you John!!
brey213 1 year ago
let's see when the first idiots are gonna start posting: impossible! impossible! impossible! hahaha ...
polapolanski 1 year ago
Awesome kit!
krazeekooladam 1 year ago 2
HI thank you for posting ...where can i get this ?? and how much ??
FREESOULIA 1 year ago
Great piece of work! Thank you John and Rick.
blackchisel97 1 year ago
Great work!
What is the output of this unit? How many watts does it produce?
pjrsullivan 1 year ago