B777-312ER PSS777 FMC startup tutorial part1

[jcavianca1]

can you said me where do you get the plane for or only send me the link please thanks

[leonels36]

something is wrong, ao to turn avionics on???

[BlazingPuppies]

How do you insert coordinates in the FMC as a waypoint?

[MusicLover11325]

@BlazingPuppies Quite easy actually, for example 4100N 16000E You would put it as N41E160 (drop the last 2 zeros) And put it in the LEGS page, not mistaken to be RTE page.

[AintNuthin1991]

I've got a small issue with the PSS 777.

Whenever I disconnect the AP with the disconnect bar, the master caution switch is illuminated with an aural warning, the EICAS displays says "AP disconnect" (or similar) in red...

Is this correct?

I also tried to disconnect the AP by pressing 'Z' but this didn't work either.

[chadsani]

does it come with a fuel planner??

[WaywardSon32]

PLEASE DONT READ THIS. YOU WILL GET KISSED ON THE NEAREST POSSIBLE FRIDAY BY THE LOVE OF YOUR LIFE. TOMORROW WILL BE THE BEST DAY OF YOUR LIFE. HOWEVER IF YOU DONT POST THIS COMMENT something bad will happen. NOW UV STARTED READIN DIS DUNT STOP THIS IS SO SCARY. SEND THIS TO 5 VIDEOS IN 143 MINUTES WHEN UR DONE PRESS F6 AND UR CRUSHES NAME WILL APPEAR ON THE SCREEN IN BIG LETTERS. THIS IS SO SCARY CAUSE IT ACTUALLY WORKS THIS ACTUALLY WORKS

[RLM7237]

So all you have to do is put in the first Jetway and Waypoint and it takes care of the rest for you? Because you didnt input all of those waypoints you just put the JETWAY and the fist waypoint then you had all those waypoints ? Thanks Captain

[R1door]

@RLM7237

No you need to insert a waypoint followed by an airway, until you reach an intersection where you go on another airway, then you insert a waypoint followed by that airway again. example, NIK V512 YAR N654 DUS etc.

[evilmontezuma87]

What company you got this B777? Wilco? Captain Sim? or from what maker?

[R1door]

@evilmontezuma87 PSS (Phoenix Simulation Software) now sold by justflight.

[Wolland77]

Can you please tell how and where to input the ILS frequency in PSS 777? Thank you very much!

[R1door]

It's done in the FMC, go to the RAD NAV page and tune in the frequency and CRS via the scratchpad.

Under normal circumstances, it will auto tune the ILS if you if you selected that RWY for the APP!

[R1door]

You are most welcome!

[nikolasdominguesduis]

ahhh it isn´t for fsx! damn

[martsyeko]

mm why my aircraft can't align ADIRU??

The PFD is on but, MAP is still off

[R1door]

Did you follow the steps properly?

1 switch of the ADIRU button

2 switch it back on

3 insert the coordinates in the FMC

4 check the timer counting down (takes around 7 minutes)

[trishulf1]

uh!? where did you get that 15% CG from??

[R1door]

I used a "fake" figure to offset the trim bug in PSS. In the mean time I fixed that bug in the CFG file. you need to increase the value from 1.0 for the elevator flight tuning to 1.4, that gives a more realistic feel

[trishulf1]

thanx...nice vid....!

[Hanmin777]

Thanks for you replay.

[Hanmin777]

Wow Very Good Video.

Would you mind if i ask you somethings.

How did you change you PFD colour

I'm try to find out how to change it

Thanks

[R1door]

I did not change it! Maybe the recording changed the colour slightly!

[bravonismo]

Um, which software/tools you use to generate the flight plan (is it used by real world)?

[FunkyZangel]

Very informative. Needed this for filling up the VNAV section. LNAV is a piece of cake but VNAV..nah..haha. And is this freez zurich?

[R1door]

This is FSdreamteam! Payware and very nice! Framerates are brilliant!

[RixceU]

Yes, great improvement! The FMC is easy to read now.

Am I supposed to enter the waypoints in the RTE page or the LEGS page? I've read somewhere it said go to LEGS, you did it in RTE. So the VIA side is the airway and the TO side is the waypoint?

[R1door]

go to 1:11 , after entering the LSZH WSSS SIA145 bit, click on "next page", there you enter the waypoints: waypoints right, airways left, follow the sequence of the Fplan.

[R1door]

You can use the LEGS page as well, but that will take forever because you need to insert each waypoint.

On a 12 hour flight, that is immense!

[RixceU]

Wait--how is it shorter using the RTE page than using the LEGS page? You don't have to insert each waypoint?

[R1door]

Correct, because you enter the airway and all waypoints on that airway will automatically appear on the LEGS page.

[RixceU]

Yeah, I just tried it out. 6 pages of RTE ended up with 17 pages of LEGS. Where do you get your flight plans with waypoints and airways?

[R1door]

for Rix,

here is the formula again i use for the fuel calculations;

EASTBOUND

M.842 cruise, Cost Index 107 above FL300/FL330/FL350/FL370 = 7000kg/hour

Or NM/69.04=trip fuel.

FOR WESTBOUND ADD NM/1000 TO TRIP