Can I tell you? Yes. I am capable and able to tell you. Certainly. Will I tell you? NO. Being a professional, the only advice I can give you for keeping your hands safe is to NOT try to build this gun!!
So is that a yes or no? Sorry I sucked in English class but I just want to make sure my hands will be safe your a professional I'm not so I just want to do it the right way.
Can you send me the exact diameters/ inside & out and what type of tubing you used for both peices also how you modified the screw please & thank you I already have some tubing but it's 80 gauge carbon steel but it seems to be to thick is carbon ok?
does the barrel burn your hand at all? and great video, really smart idea, dont listen to the dickheads with nothing better to do but find something wrong with everything
I shot one of these in the street in Honduras, my girlfriend's brother is a gang member and he had one at the house for those occasions that a machete was just not enough . it was 2am people were asleep and all of the houses are concrete there . The one I shot had a small handle on it . it looked like a cops baton when assembled
I certainly hope the British Parliament doesn't see your video, or they're liable to outlaw all water and gas pipe. This would cause a domino effect of cascading cold and wet Englishmen who smell of natural gas and who are extremely flammable.
@markserbu Ah, someone just told me that the translation is that I can shoot with just wads...try shooting a bullet. Well, as was discussed in the video this was a regular shotgun shell. It was a factory Winchester shell with #9 shot. I definitely would NOT like to shoot any sort of magnum shell through this thing!
I will be needing one of those come spring.... moving out to the unpopulated areas of my province here in Canada. Sure I can eat all the fiddleheads and berries I want, plus eat all the perch i want etc... But I need something better than a bow to hunt pheasant with.
That lil pop gun looks like just the poor man's fix I need thanks for the upload.
BTW the terrorists run your Govt. They aint Arabs either.
I remember watching a film about the US training Philipino resistance fighters military tactics and techniques. They showed how to use pipes as single shot zip guns for use against the japanese.
@TheSharpshooter2011 As long as you use decent pipe, it'll last a long time. If you're concerned, look up spec sheets for the operating PSI of the pipe you're gonna use. A typical shell is around 11,000-13,000psi. Good luck!
@Pilotgeek Please, it's not PIPE, it's TUBING. There's no such thing as "decent pipe" when you're talking about building guns! It costs a few dollars to have the best quality, seamless, DOM 4130 tubing as opposed to crappy pipe. What are your hands worth?
@MickeyNineLives Well, I admit that in most areas of the country they're just everywhere! If they're not stacked like cord wood, they're just scattered all over the ground, floor, etc. A huge problem here in the U.S. is sprained ankles from tripping over guns! I would estimate the number of guns in the U.S. to be around 16 trillion. The only reason I make guns is because it's my job, I love it, and because I CAN!!
I hate the fucking communist gun laws in the U.S. They're fucking useless. Any idiot can go to walmart and homedepot and pick up this shit for like 20 bucks total.
@TheTrueConservative lol yep, people THINK stricter gun laws would mean less gun crimes, but it doesnt work that way, as most of gun crimes are committed with illegally obtained firearms. Stricter laws are meaningless and only make it harder to protect yourself.
@andrewgpayne3 How did you make sure you asked me one of the dumbest questions you could? Why on earth would the firing pin want to blow out? It's made from a SCREW. It's SCREWED into STEEL. It's very small in diameter (like any firing pin) so it has a very small surface area for the recoil forces to act on. The firing pin blowing out is about the least likely mode of failure for this gun. Next?
@ImSo517 First of all, I checked your page and it says that you're 21 years old. Please tell me you're really 11 years old, or that English is not your primary language. I say this because your written communication skills are appalling for someone your age who presumably grew up speaking English. If English is your second language, you really ARE 11, or you're retarded, please forgive me. Now all that aside, what you say is crap. Everything you say after "...was to blow" makes no sense.
It looks to me like you've got your hand over the end of the gun. I had to replay the moment where you fire off your boomstick to see how it was that you're not blasting a hole through your hand. :<
I have made cannons out of tubing, this stuff is very thick and heavy stuff, 3 teaspoons of black powder in a .5 inch (50 caliber) pipe didn't faze it, I assure you it was WAY louder and shot WAY harder than a 12 gauge shell.
Best home defense weapon. If shooting them doesn't work you've got a nice metal pipe short enough to beat them down in close quarters. Awesome! I've made several different calibers, non are very accurate due to the lack of rifling but their fun to shoot! :-)
@Ibringthetruth1 This gun actually has features in its simple barrel that make it less likely to rupture than "real" shotguns' "special alloyed barrels", whatever that is. I've disclosed the material type somewhere in here and I think there's a discussion of hoop stress around, too. The pressure values for 12-gauge shells can be found on the internet, so there's definitely enough information around for YOU to tell ME if it'll rupture.
@Ibringthetruth1 Oh, chrome moly (not Molly, that's a girl's name)? You mean, the stuff this gun is MADE OF? Yeah, I'm somewhat familiar with that material. Okay, you can look up chamber pressures, why don't you look up "hoop stress" and maybe find the tensile strength for normalized 4130 DOM tubing and tell me if this barrel will burst? I'll give you a hint....it's EXTREMELY unlikely.
@markserbu IF the pressure was so great as to rupture the pipe and based on the steel the pipe is made from, the weakness in the design is the firing mechanism. As you still have your hand after firing, I would say that the pipe is strong enough.
Cool video I salute you for making a awesome. 50bmg don't have the cash for one yet but ill buy one probably the next rifle ill get keep up the good work!!!!
From where i am from, zip shotguns are used in gang wars and robberies in urban areas and could be made for less than 5 US dollars (200+ Philippine Peso) and that would include the 12 gauge 00 buck shell (it is sold at around 25 to 35 pesos each). It is called "Sumpak" in Tagalog and Luthang to Visayan speaking Filipinos. Barrel length would be around 2 and a half feet long and when empty (sans the shell and firing mechanism) makes a perfect impact weapon.
@GamingProductions360 Of course! This "mechanism" (I put that in quotes because it's 3 parts...hardly a "mechanism") could be used for a lot of different calibers. Since it's an unlocked breech, though, it's generally only suited to low pressure rounds. .22 would be easy and .38 would probably work, too. Even some rifle calibers would work if the mass of the slide was increased.
@n1663r The barrel of ANY gun will heat up, just depends on how much ammo you put through it. One single 12-gauge shell won't raise the temperature much at all.
@darthvader379 First I'd read through the entire description of this video. Then I'd read every comment I've posted here in response to all the other inane questions. Then I'd add a good dose of ambition, some self-sufficiency and a bit of discipline. Guys, this gun is EXTREMELY simple to build. If you have to ask how to build it in spite of all the information that's here, then you're probably too lazy or too stupid to do it. To me, either is a good "barrier to entry" for building one.
This is called a "Four Winds".Supposedly cause it could be used and quickly disassembled and scattered to the four winds.Similar though usually smaller caliber items like this have been used as improvised land mines. Buried with the bullet tip exposed.This is why the U.S. will never be defeated by a foreign enemy.Not only do we have an insane amount of firepower in private hands but even the smallest town has the machine tools and resources to build thousands more.
This is the reason gun control will never work. It's way too easy too make something that can shoot, and way too hard to erase how simple it is to make them.
Looks like a kill stick to me, they are mostly used for hunting gators. Theoretically speaking? If these homemade guns were to actually catch on here in the U.S.A. It would take alot of business away from your local gunshop. Anyone can fill out an application with the ATF, and make and register one of these homemade protection devices. Maybe that's why there are alot of negative comments on this subject. Taking the monopoly away from the corporate control of personal protection.
@markserbu actually, it's illegal to possess a shotgun with a barrel length shorter than 18 inches (46 cm) or an overall length shorter than 26 inches (66 cm), without a tax-stamped permit from the Bureau of Alcohol, Tobacco, Firearms and Explosives, requiring a background check and either a $200 or $5 tax for every transfer, depending upon the specific manufacturing circumstances of the particular sawed-off modern shotgun being transferred. so this gun is actually illegal
@hilers72652 I guess you missed the discussion of this in the description. And somewhere in these comments I talked about how we registered this gun on a BATF Form 2 (which requires no tax stamp, by the way). So this gun is actually LEGAL.
@markserbu okay, i didn't read all 200+ comments so i didn't catch the form2 part (i also almost never hear of anyone that's used one). if you don't mind me asking, which piece is numbered?
@markserbu plus with the ring you could handle much more recoil. so a bigger or better round perhaps, and with a little extension on the pipe you could increase the range or tighten the pattern pretty well. we should discuss some of this lol
@chrisgonzo9 Yeah, I'd actually like to do that one of these days. I'm a bit torn on the subject because as much as I'd like to pass on the knowledge to possibly help the hopelessly screwed and downtrodden around the world get a tool to change their destiny, it'll probably be mostly be used by punks who just want to cause mayhem, vandalize and otherwise destroy shit.
Just because this man is vague answering i can aswer for him...the end of the outside tube need to have a firing pin (In this case a bolt i think) with the end shaped like a cone with a FLAT tip (Not sharpened...remember FLAT) about 1mm diameter that hits the cap right in the center of the shell.....
@PowerMirai85 I wouldn't say "FLAT". All good firing pins have a full spherical radius. A flat tip will present a sharp ring to the primer and while probably not as likely to cause a pierced primer as a sharp firing pin, it's much more likely than with a proper firing pin.
@walmartian Probably too brittle. Plus, how are you going to affix it to the other parts? Look, it's really easy to work the end of the screw to the proper shape. You spin it up in a hand drill and shape the end with a Dremel tool, file, grinder, etc.
@markserbu yeah true but working of a spherical pin is much more complicate than a simple flat one, u need to sand it out (A lot if it's hard metal) instead of simply make a flat pin maybe sanding it a bit on borders just to eliminate sharp edges... Don't think using it by hand without an hard spring and heavy bolt can cause primer piercing...anyway a spherical one would be safer as you said...
@PowerMirai85 Making a spherical tipped firing pin on the end of a cap screw (like we did here) is about the same amount of work as making a flat one. Like I said, you stick the cap screw in a hand drill and spin it around against a grinder, Dremel tool, etc. To make the tip spherical you just move the drill so that the tip sweeps across the abrasive surface in an arc. Simple!
i made one of these ghetto shotguns and i went on vacation and left my brother (hes 18) home alone and someone broke into the house so he used it to fire a warning shot and he shot a fucking hole in my ceiling with it... i bought a rem. 870 after he did that and told him no more warning shots..
@bloomile That's what you get for not teaching your brother there's no such thing as a "warning shot".
He should've known long before 18, as part of basic gun safety, that a "warning shot" is a shot that can hit any number of things besides your attacker / home invader. If you're not in danger, you don't shoot, and if are, you shoot him and not the floor/ceiling/air.
Can I tell you? Yes. I am capable and able to tell you. Certainly. Will I tell you? NO. Being a professional, the only advice I can give you for keeping your hands safe is to NOT try to build this gun!!
markserbu 16 hours ago
So is that a yes or no? Sorry I sucked in English class but I just want to make sure my hands will be safe your a professional I'm not so I just want to do it the right way.
Arv956 16 hours ago
Can you send me the exact diameters/ inside & out and what type of tubing you used for both peices also how you modified the screw please & thank you I already have some tubing but it's 80 gauge carbon steel but it seems to be to thick is carbon ok?
Arv956 1 day ago
@Arv956 I can, yes. Unfortunately, incorrect interrogatives and run-on sentences will not be tolerated.
markserbu 18 hours ago
thanks so much. what are the parts?
libertyphoenix777 1 day ago
@libertyphoenix777 The parts are...well, the parts.
markserbu 16 hours ago
AOW?
libertyphoenix777 5 days ago
@libertyphoenix777 Yup.
markserbu 1 day ago
badass
Hoghunterclub 5 days ago
You missed the electrical outlets! Seriously- that's pretty neat. Kudos for even having the guts to try that thing out...
marlowbarley 6 days ago
that is one of the smartest things to do i ever saw
eatwatukill 1 week ago
does the barrel burn your hand at all? and great video, really smart idea, dont listen to the dickheads with nothing better to do but find something wrong with everything
screamingeagle55 1 week ago
@screamingeagle55 Nah, doesn't burn a bit. Thanks.
markserbu 1 week ago
I shot one of these in the street in Honduras, my girlfriend's brother is a gang member and he had one at the house for those occasions that a machete was just not enough . it was 2am people were asleep and all of the houses are concrete there . The one I shot had a small handle on it . it looked like a cops baton when assembled
mcgrath9 1 week ago
I certainly hope the British Parliament doesn't see your video, or they're liable to outlaw all water and gas pipe. This would cause a domino effect of cascading cold and wet Englishmen who smell of natural gas and who are extremely flammable.
And all because of your little YouTube video.
Mark, I hope you're happy now.
cottersay 1 week ago
@cottersay I thought the English were always cold and wet anyway? At least when we get them here to Florida they warm up.
markserbu 1 week ago 2
пыжами то можно стрелять ты бы пулей так же попробовал
normal493 1 week ago
@normal493 Okay, so the translation is: "pyzhami you can shoot a bullet would you just tried to". To that, my answer is: Probably?
markserbu 1 week ago 3
@markserbu Ah, someone just told me that the translation is that I can shoot with just wads...try shooting a bullet. Well, as was discussed in the video this was a regular shotgun shell. It was a factory Winchester shell with #9 shot. I definitely would NOT like to shoot any sort of magnum shell through this thing!
markserbu 3 days ago
I will be needing one of those come spring.... moving out to the unpopulated areas of my province here in Canada. Sure I can eat all the fiddleheads and berries I want, plus eat all the perch i want etc... But I need something better than a bow to hunt pheasant with.
That lil pop gun looks like just the poor man's fix I need thanks for the upload.
BTW the terrorists run your Govt. They aint Arabs either.
ALoENoMESeLL 1 week ago
Should not be making guns if you don't know the terms...my grand father died that way....a dictionary killed him..
macho844 1 week ago
How long is that barrel? Wouldn't that be considered a short barreled shotgun under the NFA?
762BR 3 weeks ago
@762BR How about you read the description and tell ME what the NFA status is? Hint: it's not a short-barreled shotgun.
markserbu 2 weeks ago
@markserbu AOW lol
Pilotgeek 2 weeks ago
Thank you for making this video and posting it. Guns are not free, but knowledge should be.
mynamestiki1 3 weeks ago 2
Could you tell me how was the cap screw modified please ? Also ahahah the impatient cameraman is a pretty fun guy
Sandow42 4 weeks ago
@Sandow42 I could tell you, yes. Thanks.
markserbu 3 weeks ago
I remember watching a film about the US training Philipino resistance fighters military tactics and techniques. They showed how to use pipes as single shot zip guns for use against the japanese.
morg52 1 month ago
@morg52 I believe this weapon is called paliuntaud or something similar in the philipine islands? Fascinating campaign...
mynamestiki1 3 weeks ago
That's fucking awesome!
jcardenas499 1 month ago
You are not right. That's why I love you, man.
MikeSenn64 1 month ago
thats fucking brilliant , i thought the end of the pipe would explode , how many rounds do u think could go through it before the barrel fractures ?
TheSharpshooter2011 1 month ago 2
@TheSharpshooter2011 Number of rounds before the barrel fractures? I would guess somewhere around infinite.
markserbu 1 month ago 4
@TheSharpshooter2011 As long as you use decent pipe, it'll last a long time. If you're concerned, look up spec sheets for the operating PSI of the pipe you're gonna use. A typical shell is around 11,000-13,000psi. Good luck!
Pilotgeek 1 month ago
@Pilotgeek Please, it's not PIPE, it's TUBING. There's no such thing as "decent pipe" when you're talking about building guns! It costs a few dollars to have the best quality, seamless, DOM 4130 tubing as opposed to crappy pipe. What are your hands worth?
markserbu 1 month ago 6
best damn home weapons defense system for the price of a gyros burger WONDERFUL!
KUSHaPOTamus420 2 months ago 2
I honestly didn't think that would work.
crazywilly3333 2 months ago
sweet
jestavonation 2 months ago
I love your description of the parts used.
C172Pilotdude 2 months ago
@C172Pilotdude Yeah, I really had to dumb it down.
markserbu 2 months ago
@markserbu - that was mildly funny. thank you ....
MickeyNineLives 2 months ago
@MickeyNineLives Glad I could help!
markserbu 2 months ago
If you live in the United states .. why would you MAKE a Gun? can't you buy them everywhere? ..
MickeyNineLives 2 months ago
@MickeyNineLives Well, I admit that in most areas of the country they're just everywhere! If they're not stacked like cord wood, they're just scattered all over the ground, floor, etc. A huge problem here in the U.S. is sprained ankles from tripping over guns! I would estimate the number of guns in the U.S. to be around 16 trillion. The only reason I make guns is because it's my job, I love it, and because I CAN!!
markserbu 2 months ago 33
@markserbu What the hell are you talking about?
crazywilly3333 2 months ago
@crazywilly3333 It's called satire.
markserbu 2 months ago
@MickeyNineLives Why waste $200 when you can make it for only $7 wtf lol
x213ERx 2 months ago
@MickeyNineLives $7 vs $hundreds. hmm. there's your answer if you're just bored or ona budget make a zip gun.
mrbratsch 2 months ago
Laugh at the end... Hawhawhawhawhaw
linefly1231 2 months ago
I hate the fucking communist gun laws in the U.S. They're fucking useless. Any idiot can go to walmart and homedepot and pick up this shit for like 20 bucks total.
TheTrueConservative 2 months ago
@TheTrueConservative lol yep, people THINK stricter gun laws would mean less gun crimes, but it doesnt work that way, as most of gun crimes are committed with illegally obtained firearms. Stricter laws are meaningless and only make it harder to protect yourself.
rich1051414 2 months ago
would you recommend this for home security?
cfc106 2 months ago
@cfc106 Absolutely not.
markserbu 2 months ago 6
@andrewgpayne3 How did you make sure you asked me one of the dumbest questions you could? Why on earth would the firing pin want to blow out? It's made from a SCREW. It's SCREWED into STEEL. It's very small in diameter (like any firing pin) so it has a very small surface area for the recoil forces to act on. The firing pin blowing out is about the least likely mode of failure for this gun. Next?
markserbu 3 months ago
Comment removed
ImSo517 3 months ago
@ImSo517 First of all, I checked your page and it says that you're 21 years old. Please tell me you're really 11 years old, or that English is not your primary language. I say this because your written communication skills are appalling for someone your age who presumably grew up speaking English. If English is your second language, you really ARE 11, or you're retarded, please forgive me. Now all that aside, what you say is crap. Everything you say after "...was to blow" makes no sense.
markserbu 2 months ago
It looks to me like you've got your hand over the end of the gun. I had to replay the moment where you fire off your boomstick to see how it was that you're not blasting a hole through your hand. :<
BlueBerryWizard 3 months ago 3
@BlueBerryWizard That's funny...I had another "developmentally challenged" person tell me the exact same thing!
markserbu 3 months ago 13
doesn't the barrel get hot?
jpjdo1212 3 months ago
@jpjdo1212 Yes. Just like any other "thing" that's exposed to the product gases of an EXPLOSION!
markserbu 3 months ago
Wow!!!
Chary989 3 months ago
I have made cannons out of tubing, this stuff is very thick and heavy stuff, 3 teaspoons of black powder in a .5 inch (50 caliber) pipe didn't faze it, I assure you it was WAY louder and shot WAY harder than a 12 gauge shell.
ScreamingOfTheAnts 3 months ago
@ScreamingOfTheAnts Because all serious firearms enthusiasts measure there powder charges in teaspoons.
blaketheawesomedude 1 month ago
hawhawhawhawhawhawhawhawhawhawhawh
MinDCrafter96 4 months ago
cool
stone4bread 4 months ago
Awesome
MrDobans13 4 months ago
hilariously kool
scerm 4 months ago
Best home defense weapon. If shooting them doesn't work you've got a nice metal pipe short enough to beat them down in close quarters. Awesome! I've made several different calibers, non are very accurate due to the lack of rifling but their fun to shoot! :-)
7689568 4 months ago
Filipino guerillas made these to deal with Jap occupiers in WW2.
BLAM !
1 down AND you get an Arisaka with a bayonet. Do a non-com or an officer and get a Nambu and a katana.
NEXT !
Gmissile 4 months ago 4
why do real shotguns use special alloyed barrels? for safety.
whats the psi for that tubing? Couldn't it rupture?
Ibringthetruth1 4 months ago
@Ibringthetruth1 This gun actually has features in its simple barrel that make it less likely to rupture than "real" shotguns' "special alloyed barrels", whatever that is. I've disclosed the material type somewhere in here and I think there's a discussion of hoop stress around, too. The pressure values for 12-gauge shells can be found on the internet, so there's definitely enough information around for YOU to tell ME if it'll rupture.
markserbu 4 months ago
@markserbu
alloy = chrome molly. leverguns . com/articles/saami_pressures.htm
quarry.nildram .co .uk/ballistics . htm Typical chamber pressures for shotguns are 75-90 MPa (11,000-13,000 psi)
Ibringthetruth1 4 months ago
@Ibringthetruth1 Oh, chrome moly (not Molly, that's a girl's name)? You mean, the stuff this gun is MADE OF? Yeah, I'm somewhat familiar with that material. Okay, you can look up chamber pressures, why don't you look up "hoop stress" and maybe find the tensile strength for normalized 4130 DOM tubing and tell me if this barrel will burst? I'll give you a hint....it's EXTREMELY unlikely.
markserbu 4 months ago 3
@markserbu IF the pressure was so great as to rupture the pipe and based on the steel the pipe is made from, the weakness in the design is the firing mechanism. As you still have your hand after firing, I would say that the pipe is strong enough.
frankgon4 3 months ago
hohohohoho
HalfCastAUS69 4 months ago
Cool video I salute you for making a awesome. 50bmg don't have the cash for one yet but ill buy one probably the next rifle ill get keep up the good work!!!!
fpssilentfox 4 months ago
@fpssilentfox Thanks!
markserbu 4 months ago
can you tell me EXACTLY how to make this and what materials i'll need???
SOCALbOY760 4 months ago
@SOCALbOY760 Yes, I sure can.
markserbu 4 months ago
@SOCALbOY760
Hey mate if you cannot figure out how to make it purely by watching the vid i suggest that you forget about making it at all :)
Nice vid!
TyaxComp 4 months ago 3
now add a fore grip :)
BAYAREA4150 4 months ago
From where i am from, zip shotguns are used in gang wars and robberies in urban areas and could be made for less than 5 US dollars (200+ Philippine Peso) and that would include the 12 gauge 00 buck shell (it is sold at around 25 to 35 pesos each). It is called "Sumpak" in Tagalog and Luthang to Visayan speaking Filipinos. Barrel length would be around 2 and a half feet long and when empty (sans the shell and firing mechanism) makes a perfect impact weapon.
kerwinsalvador 4 months ago
mark please reply. can u like make the barrel smaller and the mechanism smaller for smaller bullet like 22 38. and that kind of bullets?
GamingProductions360 4 months ago
@GamingProductions360 Of course! This "mechanism" (I put that in quotes because it's 3 parts...hardly a "mechanism") could be used for a lot of different calibers. Since it's an unlocked breech, though, it's generally only suited to low pressure rounds. .22 would be easy and .38 would probably work, too. Even some rifle calibers would work if the mass of the slide was increased.
markserbu 4 months ago
mark you the man!!!! sweet shotty bro!!!
n1663r 4 months ago
@n1663r The barrel of ANY gun will heat up, just depends on how much ammo you put through it. One single 12-gauge shell won't raise the temperature much at all.
markserbu 4 months ago
cool vid.....ive never had a zip gun and probably never will but does the barrel heat up? i mean it obviously doesn't burn the hand.
bens8588 4 months ago
What do I need to make it?
darthvader379 5 months ago
@darthvader379 First I'd read through the entire description of this video. Then I'd read every comment I've posted here in response to all the other inane questions. Then I'd add a good dose of ambition, some self-sufficiency and a bit of discipline. Guys, this gun is EXTREMELY simple to build. If you have to ask how to build it in spite of all the information that's here, then you're probably too lazy or too stupid to do it. To me, either is a good "barrier to entry" for building one.
markserbu 4 months ago 3
i would of laugh my ass off if you guys hit any of those extension cords
edenjonesss 5 months ago
Grip of damn steel!
TboneSTEAK111 5 months ago
Could you please post the schematics for the gun!
PLEASE!!
TheDzhoel 5 months ago
@TheDzhoel Yes, I certainly *could*.
markserbu 5 months ago
@markserbu well...could you? (please!)
TheDzhoel 5 months ago
@TheDzhoel Yes, I certainly could. Definitely. Sure could. No problems whatsoever with my ability to do it.
markserbu 4 months ago
@markserbu I see what you did there.
Cds56 5 months ago
@Cds56 Yeah, I guess if you hadn't we'd have to call it an "audio" instead of a "video".
markserbu 4 months ago
press 3 for indian noise
GARYisweet 5 months ago
Awesome!!!!!!!!! Looks dangerous though lol
TheBucknutts 5 months ago 2
yes but is he Asian?
dlord2300 5 months ago
This is called a "Four Winds".Supposedly cause it could be used and quickly disassembled and scattered to the four winds.Similar though usually smaller caliber items like this have been used as improvised land mines. Buried with the bullet tip exposed.This is why the U.S. will never be defeated by a foreign enemy.Not only do we have an insane amount of firepower in private hands but even the smallest town has the machine tools and resources to build thousands more.
madbodhi 5 months ago 4
Neat!
Fighterfanboy 5 months ago
hohohohohohohohoho
optikvision 5 months ago 5
i love all the " zip gun" videos!!!!
bluemagickbo 6 months ago
This is the reason gun control will never work. It's way too easy too make something that can shoot, and way too hard to erase how simple it is to make them.
CitrusLizard 6 months ago
@CitrusLizard Sure, but that thing will not be easy to conceal and the reason why it would "never work" is because ammunition is also easy to obtain.
technatezin 2 months ago
this is what the young gangbangers used in the philippines,,
idk if they still do today\
im pretty sure they got better guns now lol
rhizen000 6 months ago
0:43 spongebob character?
BAYAREA4150 6 months ago
come onthis isnt that hard to make just a tube and a bigger tube with a screw inside. but still nice job
ananqin 6 months ago
ive something very similar in Death Wish 3.
imjustwonderful 6 months ago
Looks like a kill stick to me, they are mostly used for hunting gators. Theoretically speaking? If these homemade guns were to actually catch on here in the U.S.A. It would take alot of business away from your local gunshop. Anyone can fill out an application with the ATF, and make and register one of these homemade protection devices. Maybe that's why there are alot of negative comments on this subject. Taking the monopoly away from the corporate control of personal protection.
HfHumanHfRobot 6 months ago 12
@HfHumanHfRobot Doubt it. The BATF paperwork on these takes MONTHS to process. And this is anything but a practical, safe gun!
markserbu 6 months ago
BTW I'd expect a visit from BATFE any day now. Hope you like Prison Orange!
MFE92 6 months ago
@MFE92 Uhhhhh....guess you didn't read the description, eh? This gun is perfectly legal, and you're perfectly ignorant.
markserbu 6 months ago 37
@markserbu actually, it's illegal to possess a shotgun with a barrel length shorter than 18 inches (46 cm) or an overall length shorter than 26 inches (66 cm), without a tax-stamped permit from the Bureau of Alcohol, Tobacco, Firearms and Explosives, requiring a background check and either a $200 or $5 tax for every transfer, depending upon the specific manufacturing circumstances of the particular sawed-off modern shotgun being transferred. so this gun is actually illegal
hilers72652 3 months ago
@hilers72652 I guess you missed the discussion of this in the description. And somewhere in these comments I talked about how we registered this gun on a BATF Form 2 (which requires no tax stamp, by the way). So this gun is actually LEGAL.
markserbu 2 months ago
@markserbu okay, i didn't read all 200+ comments so i didn't catch the form2 part (i also almost never hear of anyone that's used one). if you don't mind me asking, which piece is numbered?
hilers72652 2 months ago
@hilers72652 We engraved our information on the "receiver", which is the part that's not the barrel of this 2-part gun.
markserbu 2 months ago
i would put a ring at the end so my hand wouldnt slip off and get shot
ZachHwee 6 months ago
@ZachHwee Certainly not a bad idea....
markserbu 6 months ago
@markserbu Thanks, spent alot of time thinking about weapons lol
ZachHwee 6 months ago
@markserbu plus with the ring you could handle much more recoil. so a bigger or better round perhaps, and with a little extension on the pipe you could increase the range or tighten the pattern pretty well. we should discuss some of this lol
ZachHwee 6 months ago
@ZachHwee Don't get carried away...it's just a zip gun.
markserbu 6 months ago
can you make a tutorial vid on how to make it?
chrisgonzo9 6 months ago
@chrisgonzo9 Yeah, I'd actually like to do that one of these days. I'm a bit torn on the subject because as much as I'd like to pass on the knowledge to possibly help the hopelessly screwed and downtrodden around the world get a tool to change their destiny, it'll probably be mostly be used by punks who just want to cause mayhem, vandalize and otherwise destroy shit.
markserbu 6 months ago
wow, nice, dead simple.
wailingwarfare 6 months ago
"Yes Ok, I'm getting bored, praise Allah...Bladalabaladala!" That cameraman cracks me up!
MrRicardoSpears 6 months ago
0:45 funny laugh
kjboy2011 6 months ago
JESUS CHRIST!!!
PufferBluntman 6 months ago
well shit.
morgan191 6 months ago
that is fuking AWESOME !!!
CrawfosGear 6 months ago
is it possible to make a pen gun using black powder and use a small portion of the bb's inside
kj4ilk 6 months ago
lol, ultimate zip gun, up yours 22, 12 gauge just took over.
motlencore89 6 months ago
the camera man has serious ADHD
IceTrey98c 6 months ago 6
@IceTrey98c Yes I do! Somehow I'm still functional, though...
markserbu 6 months ago 6
hunt some bears with that shit
SplashOfRandom 6 months ago
@SplashOfRandom WHY? Have you ever seen the video called "Troy Gentry hunts tame bear" Are you Troy Gentry?
crxtech1 6 months ago
how much recoil would there be with a normal round
sikniz213 6 months ago
@sikniz213 More.
markserbu 6 months ago
0:45 ho ho ho ho ho ho
devilsswitchblade 7 months ago
that was pretty fuckin badass
scager310 7 months ago
take that liberal gun laws im goin to home depot to beat the system
TheJrconservative 7 months ago 23
Lol that is all going to end in tears... I liked XD
TheLordCurry 7 months ago
That was sketchy as fuck but good work!
pumpotheclown 7 months ago
@pumpotheclown Thanks. I guess.
markserbu 7 months ago
so if its that easy to make a firearm then why the fuck have you got to have a licence?
FuZZioNzZGaming 7 months ago
@FuZZioNzZGaming You don't need a license to make a firearm, unless it's an NFA firearm. This is discussed in the description.
markserbu 7 months ago
How come there's not much recoil?
DX7Alex 7 months ago
@DX7Alex Because it was a Winchester Low Noise Low Recoil shell.
markserbu 7 months ago
@markserbu Thanks.
DX7Alex 7 months ago
This is one of the fucking coolest vids on YouTube.
JonItalia 8 months ago
And he is from texas... how could i not know?
cepomwa 8 months ago
TUTORIAL PLZ! :) SUBSCRIBED.
Codgreatness123 8 months ago
Just because this man is vague answering i can aswer for him...the end of the outside tube need to have a firing pin (In this case a bolt i think) with the end shaped like a cone with a FLAT tip (Not sharpened...remember FLAT) about 1mm diameter that hits the cap right in the center of the shell.....
PowerMirai85 8 months ago
@PowerMirai85 I wouldn't say "FLAT". All good firing pins have a full spherical radius. A flat tip will present a sharp ring to the primer and while probably not as likely to cause a pierced primer as a sharp firing pin, it's much more likely than with a proper firing pin.
markserbu 8 months ago
@markserbu what about about some balled tungsten from a TIG torch?
walmartian 8 months ago
@walmartian Probably too brittle. Plus, how are you going to affix it to the other parts? Look, it's really easy to work the end of the screw to the proper shape. You spin it up in a hand drill and shape the end with a Dremel tool, file, grinder, etc.
markserbu 8 months ago
@markserbu yeah true but working of a spherical pin is much more complicate than a simple flat one, u need to sand it out (A lot if it's hard metal) instead of simply make a flat pin maybe sanding it a bit on borders just to eliminate sharp edges... Don't think using it by hand without an hard spring and heavy bolt can cause primer piercing...anyway a spherical one would be safer as you said...
PowerMirai85 8 months ago
@PowerMirai85 Making a spherical tipped firing pin on the end of a cap screw (like we did here) is about the same amount of work as making a flat one. Like I said, you stick the cap screw in a hand drill and spin it around against a grinder, Dremel tool, etc. To make the tip spherical you just move the drill so that the tip sweeps across the abrasive surface in an arc. Simple!
markserbu 8 months ago
Awsome...Really kool :D
atilathehun2009 8 months ago
i made one of these ghetto shotguns and i went on vacation and left my brother (hes 18) home alone and someone broke into the house so he used it to fire a warning shot and he shot a fucking hole in my ceiling with it... i bought a rem. 870 after he did that and told him no more warning shots..
bloomile 8 months ago 6
@bloomile That's what you get for not teaching your brother there's no such thing as a "warning shot".
He should've known long before 18, as part of basic gun safety, that a "warning shot" is a shot that can hit any number of things besides your attacker / home invader. If you're not in danger, you don't shoot, and if are, you shoot him and not the floor/ceiling/air.
bobbytimberlake 7 months ago
this will leave the investigators puzzled
ughguccimane 8 months ago 7
how long is the barrel and how long is the round.
SiccMadeist 9 months ago
i thought you need to have a shotgun butt up against your shoulder or it will fly out of your hand...
2ChillPillz 9 months ago
@2ChillPillz Obviously not, eh? Unless the thing flew out of his hand and we somehow missed it...
markserbu 9 months ago
@2ChillPillz People always have over hyped the kick of a shotgun. Its really not bad.
STL308 9 months ago
@STL308
I'd say the primary factor is what kind of round your shooting, a slug has way more punch than bird shot.
WoodlandRavah 9 months ago
The guy who is recording the video is annoying. That a neat zip gun!
mark55912 9 months ago
I agree
FPSAustralian1 9 months ago
lol :45
missedthelikebutton 9 months ago