Rubik's Professor Cube in 2 minutes 49 seconds

[putobodas]

you haven`t frie

[angel5207210]

this was slow, considering...

[koneric]

is that an eastsheen?

[cesareNBA]

I can do the 3X3 in 47 second

[ainokea54]

Wow I can only do the 3x3 in 1 min 30 secs.

[coolgrlswim44]

amazing!

[flander21]

wow..this is incredible..but it makes me want to kill people./.

[AshesIN4beauty]

dude thats insanee!!!

[krnducky]

being intelligent doesnt mean you are a nerd or geek, stupid.

[FlUdDeStRoYeR94]

YEA! some people make fun of me cuzz i can solve rubik;s cube 3x3 4x4 5x5...

[Lindsay2947]

Well done! :)

[limbulily]

wow..in mine cube ther's onlylike 9 squares on times 4 =36 togeather but his is much more,...and i cna't even slove the 36 one's dan how can i slove his one??!!..ahh! m going crazy!

[mateusmoitinho]

The prices haven't been released yet I think. But my guess is that they will be a little bit more expensive. They should be well worth it though. I've had the chance to play with one of those new 5x5s and there is no question as to which is better. V-cubes are BY FAR better than any other 5x5. Get the V-cubes, no question.

[FcGrreat]

I, I have the professor to but i don't understand how to solve last 2 edges, so when i use this method there are always 2 edges scrambled, where can i find some algorithms to finish last 2 edges? bcause i use an other method but it is too slow! nice video!

[cheezcakejimmi]

u nerd, how the freak do u memorize that??

[mateusmoitinho]

#1 I'm looking at it the whole time, so I never need to memorize it. #2 If in your words I'm a nerd, then youre admitting that I am smarter than you (and i probably am). So...thanks for the compliment, idiot.

[cubedrummer67]

I've had my 5x5 for 2-3 weeks and my PB is 3:48. I just need to get faster at edge pairing, and I could easily get around 3:15 or so. I finish my centers in around 1:30, and the finishing 3x3 part takes me around 37 seconds, so all i really need to improve on is the edges.

[Connor6742]

Ive been trying to find one but i dont know where to buy them

[mateusmoitinho]

you can order these cubes from meffertsdotcom . they are actually cheaper than rubiks 5x5s. but, i would wait to buy the v-cubes. those are awesome.

[trancebringer]

i thought 3x3x3 were hard enough!!!! but 5x5x5 AWESOME

[beho1124]

Where did you get your timer? oh and by the way Mateus Moitinho de Almedia,JB Canares,Tyson Mao,Toby Mao,and Leyan lo are my idols

[zazumage]

is that an east sheen?

[Higuma2010]

yes

[Puremirli]

you fucking lire 2.50 seconds hooo!! but good job im a freaking idiot at those things...

[tcass2011]

ok, so when you start off, is it basicly like a 3x3 rubiks cube you solve the 3x3 in the mid then after that you solve the sides like a 4x4 then when you get that done its basicly back 2 another 3x3. cause i can do a 4x4 and 3x3 and i wanna figure out how 2 do it b4 i get a 5x5

[mateusmoitinho]

you solve the centers much like the centers of a 4x4. i think its even easier though coz the 5x5 has center pieces to guide you. The edges are much like te 4x4 but you may have a hard time with the last 2 edges. then its a 3x3. You should get the 5x5, you wont have a prob solving it.

[opuim123]

its true, 4x4 isn't easier than a 5x5, but 3 minutes is really good nonetheless.

[ACmerc05]

You have a VERY nice cube.

Where did you order that from?

Nice time, too. :]

[mateusmoitinho]

its an eastsheen 5x5. I ordered it from meffertsdotcom.

[soccerman77777]

Holy shit!

Nice work!

[akgamer0615]

Nice.....I only have a 3x3 cube right now, and I'm gonna order the 4x4 and 5x5 cubes soon. I can only get 52 seconds for the 3x3, but I won't be able to get any better with my new cube (don't buy from stores....the ones they sell have huge pieces and are freaking slow....even with lubricant, they have serious friction problems....... ). Hopefully I can get less than that time before the stickers on my old one are completetely gone

Nice solve; hopefully, I can get that fast when i get mine.

[Tigerblazer]

that's a tiny 5x5 cube!

[urmomsoldballs]

that was awsome i want to do that but im too lazy

[09FinnanceS]

dude more like 2 min 50 sec

[urmomsoldballs]

wow y do u care seirously just wow he read the time on the thing

[narutofreak656]

you should try and beat that time i can't evn solv a 2x2x2 rubks cube :)

[mateusmoitinho]

I'll try and make a 2x2 vid soon. Send me a msg for questions.

[123pwnnoobs]

i cant find the 2x2 on your channel can you do it?

[Pimplestupid]

mpblue.

Kill yourself.

[mpblue24]

ur a fuckin fag, u spend ur time doin that shyt, nerd.... wow

[mateusmoitinho]

And what do you spend your time on? Your'e a fucking loser. Get back to me when you find yourself a life.

[jerjerom]

this is a worthy type of thing to do... rubik's is a good hobby!!! spending worthless time commenting like you do, this makes u a real fag mp4blue24!!!!!!!!!!

[helimeef]

Holy crap you solved those edges quickly.

[gottaluvmetal]

holy crap dude xD

[Sa967St]

where can you get those timers??

[MrKhash]

You get it from Speed Stack

[Gumby3210]

holy god. i cant even do my 3x3 :D

[LongDriveChamp03]

what kind of algorithm do you use to solve a rubik's cube.

[helimeef]

About 12 different ones if you wanna get it down to around 40 seconds. Then you can learn about 15 more and compete. Good luck.

[peter5t5t5t]

i ordered an eastsheen 4x4 on ebay from huskyomega and its amazing im not even going to lube it..eastsheen 4x4 are much better than rubik's 4x4 in my opinion..i dont know about 5x5s though

[cameron102]

I got a 4x4x4 and a 5x5x5 from Huskyomega.

They are both very good.

[ben41sbr2]

damn...i want an eastsheen 5x5, my rubik's 5x5 is really hard not smooth, but i will lube it someday, anyways, tnx for the site mat it really helped me alot. i can solve my 5x5 now, but too slow that i don't want to time myself yet...hahaha!!! i'll have a video solving a 5x5 soon.

[ThePizzaGuy92]

Rubik's 5x5x5's are of higher quality. lube it.

[exugoareo]

thats what ur mom said

[raramstad]

Rubik's brands aren't "higher quality" they are both good in their own ways, for someone like me, an eastsheen is better, i have smaller hands, a rubik's can be as smooth as an eastsheen once it's been used a LOT like after a year or so, but right off the bat i think eastsheens are easier

[Drunkasian21]

do u know all the 5x5 algorithms?

[cube41]

I have definately got to order me a eastsheen 5x5 and 4x4 cubes. My rubiks professor cube's stickers are pealing off. Are megaminx puzzles harder or easier to do than cubes?

[Drunkasian21]

i'm the same as you but my 3x3 solve is in the 50s

[Drunkasian21]

how long does it take you to do the 3x3 solve at the end?

[mateusmoitinho]

centers is about 45-1 min. edges is about 1-1:15, 3x3 is 30ish.

[cube41]

How old are you dude? Can you do a megaminx?

[mateusmoitinho]

i am 18. that is my dorm room wall in the background. I can solve a megaminx in about 5 minutes. I figured it out myself hehe.

[mateusmoitinho]

FOR BUYING PUZZLES, I RECOMMEND MEFFERTSdotCOM, RUBIKSdotCOM, or CUBE4YOUdotCOM. for stickers check cubesmithdotcom. to buy the 5x5 I use, go to mefferts or cube4you.

[mateusmoitinho]

TO ANYONE THAT WANTS THE *BEST* SOLUTION TO THE 4X4 AND 5X5, CHECK BIGCUBESdotCOM for the method the fastest cubers in the world use. it is quite easy to learn and it is written by bigcube masters clancy cochran and frank morris.

[cube41]

I can solve the entire 5x5 except for the edges. My friend does those for me and then I do the rest. How do you solve the edges? If I learn that, I can finally do the entire professor cube by myself. Also, where can I find a megaminx and a rubiks revenge

[mateusmoitinho]

check bigcubesDOTcom for a very good solution. if youre too lazy, solve edges like you solve 4x4 edges. same alg and everything. to buy 4x4 or megaminx, check meffertsDOTcom.

[Drunkasian21]

ok, how do you solve your centers? because that's where im bad at

[Drunkasian21]

how do you decide which edges to match up?

[mateusmoitinho]

I go for whichever pair i see first or whichever looks easiest. most of the time, its the first i spot though.

[seanmd99831884]

where do you get rubik's cubes which are loose?

[mateusmoitinho]

you dont get them loose. you have to make them loose. just takes alot of twisting and silicone lube helps too. dont use WD40!

[Drunkasian21]

what website are your algorithms from?

[mateusmoitinho]

my favs are from cubestationdotcodotuk and cubezonedotbe. those are the best in my opinion.

[lakai4star]

Oh, and another quick question. What is your preferred solving method for the 3x3?

[lakai4star]

Nice!! Couple of questions for you. First, what brand of professor is that, it doesn't look like a Rubik brand professor,(I want the one you have). Second when you modified it, did you just lube it? or did you make other modifications?

I can solve my Rubik's professor in around 15 to 20 minutes, I hope to get under 5 minutes some day but, under 3 wow!!

[mateusmoitinho]

Keep practicing and you'll drop minutes in days. My 5x5 is an eastsheen. All i did was lube it alot. I prefer eastsheen 5x5s but most people suggest Rubiks. I like mine coz its very loose and my rubik 5x5 sucks.

[lambofgodband]

how do you do that without it breaking?

[mateusmoitinho]

eastsheen 5x5s are pretty durable with gentle hands.

[lakai4star]

Thanks for the reply's, much appreciated. I do have a couple more questions if you don't mind. Can you recommend an easy way of getting an eastsheen? I went to there website, but couldn't figure out how to purchase, how did you get yours?

[mateusmoitinho]

I got my eastsheen from meffertsdotcom. It shouldnt be do much of a problem. If that one doesnt work, you can try cube4youdotcom but it is a little more difficult on that one. For 3x3, I use Fridrich with some random tricks....but mostly fridrich.

[lakai4star]

Thanks again man, i just sprayed tons of lube into my 5x5 and it did nothing, I seriously need a sheen. Do you give lessons? I would gladly pay upwards of 20 bucks an hour. Let me know and, thanks again for your help:)

[mateusmoitinho]

i gladly teach people but i wouldnt ask anything in return. how do you wanna be helped?

[Drunkasian21]

how would you get faster at solving the edges?

[mateusmoitinho]

practice looking ahead for pieces for the next edge pair. so while youre putting together one edge, you already know where the other 3 are.

[Hakujin07]

he dude. I noticed your last step is like my last step. the back forward forward back step.

[Hakujin07]

yeah I noticed you were building the center, but do you pay attention to one side? The way I solve my 3x3, I finish the white and dont pay attention to it. then move up each level until I fix the whole thing. Im sorry Im a noob at this. but ummm..how did you learn to solve the 5x5?

[Hakujin07]

hey dude I just figured the 3x3. and I noticed its almost the same technique you use for the 5x5. can you give me tips?

[mateusmoitinho]

how do you solve the 3x3? for the 5x5, first make the centers, then complete all edge pieces(3 pieces to an edge piece) then solve just like a 3x3. if you watch closely, i first build centers, then i destroy the 4 middle centers to make the edges then i put the centers back again.

[ninjacraze]

COME TO MY VIDEOS AND ILL SHOW YOU HOW I DO IT !!!

HOW DID YOU DO IT ?? 5X5 THATS carrrrrraaaaazzzzyyyyyy!!!!

[therideroflines]

ive noticed that for me, the 5x5's are the easiest...

[ThePizzaGuy92]

dude i've watched the like 10 times, haha it amuses me, it's prolly my fav youtube rubik's video

[mateusmoitinho]

thanks man. ill try to get a sub15 avg on camera soon.

[ThePizzaGuy92]

hey is that an eastsheen?

[mateusmoitinho]

yep it is. most cubers hate it.

[ben41sbr2]

that was fast...i don't have a 5x5...

[beatstick112]

YOU GAVE US HORSE VIAGRA!

[259]

Just look for the easiest ones you can group together and don't put the centres back until you get to the last four edges.

[ben41sbr2]

whats the difference when you solve the centers and edges of a 4x4 and a 5x5?...i don't know how to solve a 5x5 becuase i don't have one yet.

[wborofball85]

whats ur method for solving edges...i didnt really look much up when i do it. i just did it kinda like a 4x4 but its really slow and enifficiant.

[ThePizzaGuy92]

nice work. it's tough [for me anyway] to get under like 5 minutes,