you could come up with a way that at same time you pull the lever it cocks the hammer thus making you action only... now to serious buiseness where the hell can i get 1 one of those books and where i can find as much tools as you probably have?! pls answer!!
@bazengao Hi, if you look at my other clips you'll see that the lever both operates the bolt and cocks the striker. If you mean Mr Buckleys books i suggest you have a look at my friend Pedros website "airgundevelopment(dot)com" for Mr Buckleys contact details. Tools... buy used, good quality stuff, stay away from cheap low quality tools.
I drill all the long holes with a home made boring bar in my lathe. Boring bar in lathe chuck, bolt the workpiece to the crossslide and feed it towards the boring tool. For even better accuracy you can make a "boring between centers bar". Might be hard if you go for a 10mm hole, but anything bigger than that should really not be that hard.
interesting transfer port design.
alehax27 4 months ago
can you make a tutorial of the inside mechanism??
chilidress 11 months ago
you could come up with a way that at same time you pull the lever it cocks the hammer thus making you action only... now to serious buiseness where the hell can i get 1 one of those books and where i can find as much tools as you probably have?! pls answer!!
bazengao 1 year ago
@bazengao Hi, if you look at my other clips you'll see that the lever both operates the bolt and cocks the striker. If you mean Mr Buckleys books i suggest you have a look at my friend Pedros website "airgundevelopment(dot)com" for Mr Buckleys contact details. Tools... buy used, good quality stuff, stay away from cheap low quality tools.
Cheers
ulanbatorgator 1 year ago
@ulanbatorgator TY^^
bazengao 1 year ago
so u need a lathe to do this and u cant get those parts ne where right?
carnage6ar 1 year ago
Very nice job. I like the last video, too. Where'd you get the barrel and pnuematic cylinder? Cheers from the USA!
togaida 1 year ago
Nice! I see you put the transfer port in your bolt probe?
Seems like that;s handy for easy cailber changes!
And a small question, How did you drill the long hole to make the bolt /barrel fit?
I have been thinking on how to do this for a long time and I allways keep comming to the conclusion that I can't get that hole perfectly straight...
Cheers from the Netherlands!
SpeedyNecrosis 1 year ago
@SpeedyNecrosis
Thanks!
I drill all the long holes with a home made boring bar in my lathe. Boring bar in lathe chuck, bolt the workpiece to the crossslide and feed it towards the boring tool. For even better accuracy you can make a "boring between centers bar". Might be hard if you go for a 10mm hole, but anything bigger than that should really not be that hard.
Cheers
ulanbatorgator 1 year ago
that is very awesome. good work!
lilArabWarrior 1 year ago
Awsome
butaangas 1 year ago
looking good mate!!
chinnerz2 1 year ago