Holder med MrMicke02 .. dette er en "underbar" serie :) Det beste med serien, syntes jeg, er at du ikke bruker en masse dyrt verktøy. Du viser at man kan lage meget flotte piper, uten å måtte investere en hel masse i dyrt utstyr. Du har inspirert meg til å kjøpe inn min første pre-drilled blokk og lage min egen pipe :)
Greate tools. I hope not to offend if I copy such. In a few days, maybe weeks, I will do my pipe. It will be a reference to the Eltang Cutty. I was given an Rustication using a wire brush on the drill. I did meake a couple of pipes, of Briar and cherry wood. Certainly the work on the pipe created an article on fajka.net.pl
A few comments.
When bending the mouthpiece, you need to insert fitted inside the wire.
Czechoslovakia no longer are the Czech Republic and Slovakia.
Greate tools. I hope not to offend if I copy such. In a few days, maybe weeks, I will do my pipe. It will be a reference to the Eltang Cutty. I was given an Rustication using a wire brush on the drill. I did meake a couple of pipes, of Briar and cherry wood. Certainly the work on the pipe created an article on fajka.net.pl
A few comments.
When bending the mouthpiece, you need to insert fitted inside the wire.
Czechoslovakia no longer are the Czech Republic and Slovakia.
Underbar serie! Jag är en cigarrkille som just upptäckt piprökning och är mycket sugen på att göra en egen. Din serie sitter som en smäck! Skickade efter en pipa och McLelland glory maduro från 4noggins för att komma igång. De hade slut på briar ämnen. Kontakta mig gärna med tips på var jag kan köpa briar (och tobak för den delen) så jag kan testa egen piptillverkning. sjolund.mikael (at) gmail.com
Wonderful addition Flieger, this is going in my Fabs immediately!! One thing though, how do you make those tools? And of course I dont mean the dremmel hahaha even though I reckon if you had to you would come up with the Fliegermel!! Send you my best!! Tx for the upload ;-)
@LondonsPipe LOL! You want me to do an extra video on how I make my tools? Nah, I think you have to use your own fantasy a little and figure it out for yourself. Almost anything that leaves a mark on the briar can be used... let your imagination guide you and get creative... THEN you come back here and show me how YOU did! :)
Thanks for watching! I'm interested in rustication techniques too and I'm always on the hunt for tools that will give me an exiting pattern on my pipes.
Something like this I have been expected, but I first saw it live. It's looks very simply and difficult in same time. Just great video. The great mystery of rustication solved!;-) Of course, I add this video to my favourites immediately.
@ZubrisLV Thanks Igor! Pipe rustication is only a matter of getting an uniformed, rough surface... there's 100's of ways of doing that. :) I just read about something called "Fireblast" that i'm going to try some day.
Yes, it takes a bit of patience... but so does pipe smoking. But I understand if your hands are shot. Pipe carving by hand takes a toll on your wrists. :)
Great video, thanks for the info.
AASTRANGE 2 months ago
Looks like you've got a diver on a NATO strap there. Are you a watch guy as well?
K1RKH4MM3T 2 months ago
Great video. I really like the intro..very classic
EFHCustoms 4 months ago
Holder med MrMicke02 .. dette er en "underbar" serie :) Det beste med serien, syntes jeg, er at du ikke bruker en masse dyrt verktøy. Du viser at man kan lage meget flotte piper, uten å måtte investere en hel masse i dyrt utstyr. Du har inspirert meg til å kjøpe inn min første pre-drilled blokk og lage min egen pipe :)
Takk ;)
Degenetron 8 months ago
Great videos on making a pipe! I have an ebuchon kit and have let it sit because I've been kind of lost. This has inspired me!
davowaindav 1 year ago
Unique advises,thank you so much my friend you help a lot of people with your videos! Keep up the good work my fellow pipe smoker :-)
Grenadieros 1 year ago
@Grenadieros Thank you sir. I'm glad you like it.
Cheers,
-Mike
Flieger671 1 year ago
This has been flagged as spam show
Greate tools. I hope not to offend if I copy such. In a few days, maybe weeks, I will do my pipe. It will be a reference to the Eltang Cutty. I was given an Rustication using a wire brush on the drill. I did meake a couple of pipes, of Briar and cherry wood. Certainly the work on the pipe created an article on fajka.net.pl
A few comments.
When bending the mouthpiece, you need to insert fitted inside the wire.
Czechoslovakia no longer are the Czech Republic and Slovakia.
Yours sincerely
TheMeerschaum 1 year ago
Greate tools. I hope not to offend if I copy such. In a few days, maybe weeks, I will do my pipe. It will be a reference to the Eltang Cutty. I was given an Rustication using a wire brush on the drill. I did meake a couple of pipes, of Briar and cherry wood. Certainly the work on the pipe created an article on fajka.net.pl
A few comments.
When bending the mouthpiece, you need to insert fitted inside the wire.
Czechoslovakia no longer are the Czech Republic and Slovakia.
Yours sincerely
TheMeerschaum 1 year ago
This has been flagged as spam show
Underbar serie! Jag är en cigarrkille som just upptäckt piprökning och är mycket sugen på att göra en egen. Din serie sitter som en smäck! Skickade efter en pipa och McLelland glory maduro från 4noggins för att komma igång. De hade slut på briar ämnen. Kontakta mig gärna med tips på var jag kan köpa briar (och tobak för den delen) så jag kan testa egen piptillverkning. sjolund.mikael (at) gmail.com
MrMicke02 1 year ago
Underbar serie!
MrMicke02 1 year ago
@MrMicke02 Trevligt att du gillade den.
Tack!
-Micke
Flieger671 1 year ago
Excellent addition to the Pipe Carving School series, Mike! This series of vids is really one of the most useful on YT.
Cheers,
Crow
cacrow 1 year ago
Wonderful addition Flieger, this is going in my Fabs immediately!! One thing though, how do you make those tools? And of course I dont mean the dremmel hahaha even though I reckon if you had to you would come up with the Fliegermel!! Send you my best!! Tx for the upload ;-)
LondonsPipe 1 year ago
@LondonsPipe LOL! You want me to do an extra video on how I make my tools? Nah, I think you have to use your own fantasy a little and figure it out for yourself. Almost anything that leaves a mark on the briar can be used... let your imagination guide you and get creative... THEN you come back here and show me how YOU did! :)
Cheers mate!
-Mike
Flieger671 1 year ago
@MountainBriar Hi Dobbin,
Thanks for watching! I'm interested in rustication techniques too and I'm always on the hunt for tools that will give me an exiting pattern on my pipes.
Cheers,
-Mike
Flieger671 1 year ago
thank you m8 ;-)
cressy7isback 1 year ago
@cressy7isback You are welcome! :)
Cheers,
-Mike
Flieger671 1 year ago
Superb video Mike. You have given me inspiration. I shall start looking for some raw materials.
Cheers
Dean
dohngl 1 year ago
@dohngl Thanks Dean! I'm always happy when I can inspire people to create stuff of their own. Good Luck!
-Mike
Flieger671 1 year ago
Something like this I have been expected, but I first saw it live. It's looks very simply and difficult in same time. Just great video. The great mystery of rustication solved!;-) Of course, I add this video to my favourites immediately.
Cheers
Igor
ZubrisLV 1 year ago
@ZubrisLV Thanks Igor! Pipe rustication is only a matter of getting an uniformed, rough surface... there's 100's of ways of doing that. :) I just read about something called "Fireblast" that i'm going to try some day.
Cheers mate!
-Mike
Flieger671 1 year ago
Glad you finally decided to do this video, good job
bianbrian 1 year ago
@bianbrian Cheers! Thanks for watching mate.
-Mike
Flieger671 1 year ago
Very nice video Mike !!! Thanks
Cheers,
Paulo
PRPIPES 1 year ago
@PRPIPES Thanks Paulo, glad you liked it!
cheers,
-Mike
Flieger671 1 year ago
Very interesting, Mike! I think it would be a great hobby for people with a lot of patience. If my hands were in better shape I'd give it a shot. ;)
~D
Naturainfinity 1 year ago
@Naturainfinity you can just reap the rewards of others' hard work!
thepypehype 1 year ago
@thepypehype Sounds good to me! ;-)
Naturainfinity 1 year ago
@Naturainfinity Thank you Donna,
Yes, it takes a bit of patience... but so does pipe smoking. But I understand if your hands are shot. Pipe carving by hand takes a toll on your wrists. :)
Cheers,
-Mike
Flieger671 1 year ago
wow very cool video thank you
maffers7087 1 year ago
@maffers7087 Cheers mate, glad you liked it!
-Mike
Flieger671 1 year ago