It has VFC tied for the strongest EBB recoil on the market, and TM's is better since it doesn't jam every other round. (VFC's bolt has trouble moving around a lot)
You mean magazine/clip? The cartridge is the bullet and casing... and also, Russian soldiers are taught to hold the gun's magazine as a forward vertical grip, due to the lack of RIS rails. Therefore, he is holding the gun fine. Learn your stuff before laughing.
waste of money..try buying china-made ak instead..models ranging from the old fasion ak47 to the newest model like the ak-tactical(it have rails on it and folding/retractible butt) 1/4 the price of this japanese aegs!!
Chinese aegs are a waste of money...they have poor QC and small lifespans...I would rather have a tokyo marui that will last me forever with little to no maintance..
change my mind...dont buy china..piece of junk...tested it last 4 months..ahah try buying hongkong made or taiwan made..good quality...and much cheaper than japan..but same durability...trust me...buy g&g or g&p or even CA,very good quality..
I really don't like the new marui guns. The M14 was the last gun worth the build, but if this is the next step, forget it. the Uzi mecha5 "recoil" was lame enough. Get a Cyma, and get some steel with it. :D
If you don't know, don't say. The point is the recoil. It's the first decent aeg blowback and as its an aeg it has no use for a charging handle apart from protecting your hop settings
I read what I said from arms magazine the authority on airsoft. I'm just repeating what they said so If your calling me out your them out too fagtard.
No need for the name calling, I just assumed you were an eight year old american kid pretending to know more than he did. I am calling arms magazine out yes. Go to arnies and ask, if you don't believe me.
Apologies I'm havin a shit day. Jeez I haven't been to arnies in many moons. I may have mis translated arms. I can read japanese but some of the kanji gets a little mixed up. Check my channel I'm almost 30 unfortunately :P It has it's perks though. I'm actually an admin on an airsoft forum in the states.
Actually, in response to CNCGeneral, about the first decent AEG blowback, G&G made the L85A2 with blowback feature a while ago, and it works great (I own one, haha.). Also, Guarder just came out with a recoiling carbine. This isn't new technology, as far as I know.
And before that Guarder also made a recoil bolt for the Marui/Guarder(kit) AKs. It was a simple upgrade and moved back and forth in much the same way the tappet plate does, attaching to a moving part in the gearbox.
Raping the gun like that ain't cool!.......at all!
ThexXxStalker 8 months ago
not a bad amount of jiggle, for an ebb
DrPracticleHat 1 year ago
FAIL
Thrabit 1 year ago
I'm waitng for the RPG to come out
nenzi671 2 years ago
i think having the trigger pulled down for that long on auto will damage the gearbox
reallysecretusername 2 years ago 2
OMG when i saw the camera sliding in front of the gun i was like "well that camera man is screwed" xD
MacoCoffee 3 years ago 12
Yea lol, I thought the same
Sinbad683 2 years ago
same, but actually the barrel was blocked :P
chowken312 2 years ago
thats so cool how he's aiming at something but there is nothing shooting because the barrol is blocked
haywhatsupdog 3 years ago
Rifle=great, quality is great as every Marui product
Recoil=Kinda funny, but too weak.
ROF=insane
Mustang1204 3 years ago
This comment has received too many negative votes show
fuckin toys
how lame is this
kikiashley777 3 years ago
waste of money
needs more 'kick'
ballzley 4 years ago 3
It has VFC tied for the strongest EBB recoil on the market, and TM's is better since it doesn't jam every other round. (VFC's bolt has trouble moving around a lot)
wjlasloThe2nd 3 years ago
He holds it by the cartridgge hehe
dragonman911 4 years ago
You mean magazine/clip? The cartridge is the bullet and casing... and also, Russian soldiers are taught to hold the gun's magazine as a forward vertical grip, due to the lack of RIS rails. Therefore, he is holding the gun fine. Learn your stuff before laughing.
GeckoSniper 4 years ago 6
ahh, Right i see, Thanks for pointing that out.
dragonman911 4 years ago
lool
nitroboy333 4 years ago
hes for the soviet army !!1
airsoftlamblover 4 years ago
waste of money..try buying china-made ak instead..models ranging from the old fasion ak47 to the newest model like the ak-tactical(it have rails on it and folding/retractible butt) 1/4 the price of this japanese aegs!!
Yan2xNg 3 years ago
Chinese aegs are a waste of money...they have poor QC and small lifespans...I would rather have a tokyo marui that will last me forever with little to no maintance..
GandhiGoneWild08 3 years ago 3
but i rather buy from japan because the usalyy build stuff that lasts
totenkopf00000000000 3 years ago
change my mind...dont buy china..piece of junk...tested it last 4 months..ahah try buying hongkong made or taiwan made..good quality...and much cheaper than japan..but same durability...trust me...buy g&g or g&p or even CA,very good quality..
Yan2xNg 3 years ago
@Yan2xNg You do know that CA and G&P are from HK,which happens to be in china,right?
RavenwoodAirsoft47 1 year ago
sorry but
Made in China = SHIT.
PCSoftwareFan2009 2 years ago
yeah i said lately that don't buy chinese made aegs..they suck! try hk or taiwan made, decent price for quality
Yan2xNg 2 years ago
sorry but...it isn't made in china
wjlasloThe2nd 2 years ago
when is it for sale?
Rammsteinn8Italia 4 years ago
Now.
GeckoSniper 4 years ago
Does anybody know were i can get that type of vest and gloves?
jimmy52194 4 years ago
look at the Redwolf airsoft website
Craniel 4 years ago
how are you keep this gun??? do you ever keep real gun? oh my god!!
ksicht6 4 years ago
what?
wiljoebob808 4 years ago
u do know he could buy a bullet magazine and its a real gun right
drunk4bar 4 years ago
ohh shitt, i thought i was the only one that ever did thatt..... so there is another
ritziszen 4 years ago
いい時代だ・・（ＴＴ）
jifuku 4 years ago 4
Or just get a VFC AK!
Cougar545x39 4 years ago
I really don't like the new marui guns. The M14 was the last gun worth the build, but if this is the next step, forget it. the Uzi mecha5 "recoil" was lame enough. Get a Cyma, and get some steel with it. :D
ZeroG84 4 years ago
The point isn't the recoil it's the cycling of the charging handle.
ShadowtheRotarygod 4 years ago
If you don't know, don't say. The point is the recoil. It's the first decent aeg blowback and as its an aeg it has no use for a charging handle apart from protecting your hop settings
cncgeneral 4 years ago
I read what I said from arms magazine the authority on airsoft. I'm just repeating what they said so If your calling me out your them out too fagtard.
ShadowtheRotarygod 4 years ago
No need for the name calling, I just assumed you were an eight year old american kid pretending to know more than he did. I am calling arms magazine out yes. Go to arnies and ask, if you don't believe me.
cncgeneral 4 years ago
Apologies I'm havin a shit day. Jeez I haven't been to arnies in many moons. I may have mis translated arms. I can read japanese but some of the kanji gets a little mixed up. Check my channel I'm almost 30 unfortunately :P It has it's perks though. I'm actually an admin on an airsoft forum in the states.
ShadowtheRotarygod 4 years ago
Actually, in response to CNCGeneral, about the first decent AEG blowback, G&G made the L85A2 with blowback feature a while ago, and it works great (I own one, haha.). Also, Guarder just came out with a recoiling carbine. This isn't new technology, as far as I know.
BadKidinc 4 years ago
And before that Guarder also made a recoil bolt for the Marui/Guarder(kit) AKs. It was a simple upgrade and moved back and forth in much the same way the tappet plate does, attaching to a moving part in the gearbox.
0incorporeal 4 years ago
The blowback effect looks somehow "lame". Similar to my AK74 with aluminium piston...
Cougar545x39 4 years ago