Two Years of Bedini Projects

[cloverpark2011]

im confused. i have one Bifilar coil and three with only one guage of wire on it making my project have total four coils of spooled wire with a core in each. how do i hook all of these up to work together and do they all have to be bifilar coils? nice job on your success by the way. i am interested to here back from you since you obviously know what ur doing. if possible can you send me a diagram on how to construct this. thanks

[Mrinfoone]

hi sinse seem like you know just about everthing on the bedini circuit. Can you tell how to connect more than one or up 10 coils to a bedini circuit? Do you to have seperate controllers or can you used the same one. Please very specific if you can helpp thhxs.

[andywalkerplumber]

I wonder if the bedini could be made better using two wheels, one on the other side of the electromagnetic coil, only on that one, the polarity of the magnets would be all opposite poles..or what would happen if two wheels with two northpole magnets were on opposite sides, of the core spinning. I guess there are so many ideas you could play with it would take a few life times to get around to them

[333kgb]

The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery

[UrCoffeeTastesToasty]

NIce Work. Hadn't seen your motors yet, will come again.

Thanks for the cap pulser, had been over many brain breakers (circuits) myself and never been able to find a proper working cap pulser without the gap.

greets,

YCTT

[sdfab]

Man that was really emotional for me . This research has changed my life.Im so glad other folks are beating the same path

[oioioi3000]

Do you have a Cap Pulser Circuit you could email me?

I have been able to charge my Battery to 13.3V while not to badly draining my input and wanted to facilitate continuous input by placing a Capacitor large size to dump back to input now and then please reply soon

[K0W0O0N0]

Yeha, great video man!

Cheers...

[SkeyeDreamer]

you're unbelieveable.....  great! keep going on!!

[melikegolf]

Hi,

I must commend you for your energy and dedication to the "higher" learning. You are obviously driven and are connected to the conscience revolution occuring worldwide.

You are not alone. We must share our knowledge and discoveries for the betterment of all humanity. I am definetly thinking about things differently.

I have lots of experience in electricity and electronics and am currently studying MEG stuff. Where do I get info on Bedini motors?

Cheers,

[dividebyN]

BTW, I'm not knocking ANYONE for trying!

[msearson1]

So what's the verdict ? Are bedini systems overunity or not ?

Many Thanks for posting all your things.

[introvertebrate]

Hard to say. I can confirm that the batteries charge faster than they should considering the energy they are receiving, so it appears extra energy is entering the system, but I have yet to charge two batteries off one battery.

[msearson1]

That's what I've seen so far too. Investigations continue. Have fun.

[Texmurphy51]

Here is a test for overunity in your devices. Construct a relay that will switch input and output batteries. Hook a timer to this based on your past experience of how long it takes to charge a battery. Switch these batteries when the output is charged. Hook a small load that you think is the overunity amount to the output. This configuration should run Forever, or until something breaks. Use small gel cells & if it runs for a month I will believe overunity.

[dividebyN]

Not on yer nelly! Rectifying the back emf of a coil is only going to return the same energy input to the coil returned minus the losses of the coil itself! Not to mention core Q, saturation and permeability! Do you seriously think the power companies wouldnt have one on every corner if that were not the case! Consider ONE question please! IF overunity was possible, WHERE would the resultant excess energy GO? Put simply, it would DESTROY the enviroment! NOT save it! I wish people would THINK !

[introvertebrate]

What about the excess energy that is hitting our planet from the Sun? Is the Sun destroying the enviroment?

(no debates on climate change please!)

you are absolutely correct in your analysis of the circuit. The SG motors do not output more energy than they input. The energy only shows up in the batteries. By doing load tests, you can confirm that more energy has been stored by the battery than the amount of energy that has been output by the motor.

[dividebyN]

Hi introvertrebrate! I KNOW my analysis is correct thanks. There isn't 'excess' energy from the sun. There is energy and that is that! Our orbit is the only determining factor in how much of that energy we receive, (obviously), so dont try and get smart with 'counter questions'. KNOWLEDGE IS GAINED THROUGH ASKING QUESTIONS, NOT BY ANSWERING THEM ! Anyway, on a lighter note, I wish EVERYONE all the best for 2010! Skeptics and debunkers, believers and nay sayers! ALL ! GOOD LUCK !

[introvertebrate]

"KNOWLEDGE IS GAINED THROUGH ASKING QUESTIONS, NOT BY ANSWERING THEM"

it *was* a question ;)

Wasn't trying to get smart... no need for the attitude.

[dividebyN]

BTW, quote 'The energy only shows up in the batteries', eh, I hate to sound like I'm taking the P13H but, what kind of ridiculous statement is that! It only shows up in the batteries! How? Did the fairies drop by when you werent looking and drop off a few electrons there? C'mon! Also, our planets ionosphere serves as a 'trap' for 'earth borne' electrodynamic energy! If you cant grasp the concept we would all fry as a result of 'free' energy, then I am not the 1 2 explain it 2 u ! Good luck all !

[introvertebrate]

Yes, perhaps the electron fairies left some electrons under the lead plate's pillows or something. The fact remains that no matter what method you choose to measure the energy that is being applied to the battery, you will find the battery has stored more energy than there was available and that can easily be confirmed by discharging the battery through a known load.

There are several theories out there for why it happens, but nothing I can confirm... I can only confirm it happens.

[alex681219]

tkx, never have seen the cole switch, I find some plans and looks very interesting run a motor with just a capacitor :)

[jeannacav]

This is so great. It was Bedini who introduced me to Stubblefield years (10?) ago. I am beginning to see his connection to Stubblefield. This retrospective of yours has given this NON machinist a sense of how I could go about making a Bedini motor... at last!

Thank you so so much.

jeanna

[alex681219]

Tkx for your answer, I will try with it! I find in a local store a pair mjl21193 and mjl21194 for 10 dollars.How can connect the The mjl21193 and 94 together? or just can use the 94?

[introvertebrate]

I don't know the spec of the mjl21193 so can't really comment on that...

when looking at the MJL21194 from the top with the pins pointing towards you like this:

[=]

///

the pin on the left is the base, the middle pin is the collector, and the pin on the right is the emitter.

but it sounds like you want to hook them both up together? Are you trying to make a darlington pair?

[alex681219]

congratullations!!! I been watching you at the begining. Just now have the personal power for begins a bedini or radiant project. I Began with the joule thief charger (simple no mobile parts), and it works fine!!!. But I want to built a SSG or lindeman motor. The Q is really is better the MJL 21194 than a 2n3055 darlington? the 194 is expensive, but I want to know if the diference pays the ticket.

[introvertebrate]

The MJL21194 is a far superior transistor to the 2N3055... it is the only one I use now .The 2N3055 is a very good transistor for the cost and for experimenting it is fine, though when you are certain everything is set up the way you want it it is worth investing in MJL21194s. You're right they are expensive. I get mine from courtiestown co uk... he does four for £10 which is the cheapest I have found and they are definitely genuine! Best of luck with your projects!

[oglundasotarn]

hello! i am from sweden so my spelling... Ive just started my bedinimotor , and thanks for all the help! i couldent done it alone but my question is about the thicknes of the coil wire, we only can by mm. not inches so i have 0,30/0,35mm. in my coil. Can you translate 22/26# in to mm?

[ki4npx]

super good...and thanks i have built your design of motor, but i have just started my adventure with the bedini, i have watched all your vids and lidmotor too jon darvo and dafman...this is fun . i will show  the kids at school ....in science class they will love it .....thanks again chas

[fanny136]

Brilliant!

[hume12345]

is there a newsgroup or forum you guys use?

[Lidmotor]

Great video. You started my whole adventure in electronics off 2 years ago with your video on how to make a Bedini motor. Alot has happened in two years. I wonder how many other people are out there who watched that video of you wandering around outside talking abiut the Bedini motor then said to themselves, " I wonder if I could make one of those". ----then did. Thanks for all your sharing.

[eroutt]

have you played with my easy bedini no barring one magnet motor? look it up! every one is trying it with really good charging results! i am three years in as of November 3rd i am going to show my evaluation as soon as i can get time:) great job!! oh and look at jonnydavro snake egg no barring one magnet bedini motor! i am also levitating the magnet as it spins:)

[introvertebrate]

I was the first to reply when Johnydavro posted it on the energetic forum ^_^ looks cool, but I have too many projects on the go at the moment, so that is something I'll have to leave to you guys ;)

Good luck with it!

[comwarrior69]

nice work...

I'm looking forward to my one year (January) certainly got plenty of vids to pick and mix...

And i love that song ;)

[cancio157]

video editing sync with the beatz.  nice

[lostintimeBC]

enjoyed all the vids lot of info just would like to know what practical applications can we use  these type of units for on an every day basis

[introvertebrate]

Unfortunately they are not practical for running your house due to the huge amount of batteries that will require. However, if you are already using your own source of power (eg, solar, wind etc) then these technologies are far better suited to charge your batteries as they will increase the capacity of the battery bank, charge faster, and the batteries won't degrade over time as they do with conventional charging methods.

[marthale7]

Wow, you have not been sleeping have you :-) How did your battery swapper experiment go, did you get any good results for your effort for swapping the batteries for that many times? Cheers!

[introvertebrate]

It ran for two months then I moved house so had to stop the experiment. Recorded some interesting results and there is definitely something to the conditioning process. I haven't restarted the experiment since I want to finish the bigger oscillator then start again. A little tip I can say is that regular deep discharges are necessary and you will see faster results as well ;)

[gadzometer]

Have you tried the Rodin coil + bedini yet? I think I saw your name associated with this concept. I would love to see the results of that. Peace, Gadz.

[introvertebrate]

haven't tried the rodin coil... I think I originally said a toroid wouldn't work for a motor. lol, can't be right all the time.

I don't think I'm going to experiment with it since I have a few long term projects on the go... I'll leave that one to the others ^_^